Home > Panasonic > Phone > Panasonic Kx Tda5480 Getting Started Manual

Panasonic Kx Tda5480 Getting Started Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Kx Tda5480 Getting Started Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							C1 Initializing the VoIP Gateway Card
    Getting Started 71
    4.Using the KX-TDA50 Maintenance Console, set the status of the card to OUS, then set it 
    back to INS.
    5.Return the System Initialize Switch to the NORMAL position.
    KX-TDA0484
    1.Install the card to the KX-TDA100/KX-TDA200 PBX, and then turn on the power to the 
    PBX.
    2.Using the KX-TDA Maintenance Console, confirm that the card is in service (INS).
    3.Set the System Initialize Switch to the SYSTEM INITIALIZE position.
    CAUTION
    Do not press the Reset Button nor turn the power off then on while the System Initialize 
    Switch is in this position. Doing so will initialize the PBX.
    4.Using the KX-TDA Maintenance Console, set the status of the card to OUS, then set it 
    back to INS.
    5.Return the System Initialize Switch to the NORMAL position.
    Power Switch
    System Initialize SwitchReset Button
    SYSTEM
    INITIALIZERESET
    NORMAL 
    						
    							C1 Initializing the VoIP Gateway Card
    72 Getting Started 
    						
    							Getting Started 73
    Appendix D
    Using the KX-TDA5480/KX-TDA0484 and KX-
    TDA0480 in One Network 
    						
    							D1 Considerations in Installation
    74 Getting Started
    D1 Considerations in Installation
    Provided below are the points to consider when the VoIP network contains both the KX-
    TDA5480/KX-TDA0484 and KX-TDA0480 VoIP Gateway Cards.
    Adding the KX-TDA5480/KX-TDA0484 to the Network Using the KX-TDA0480 
    Maintenance Console Software
    For the KX-TDA0480 to recognize the KX-TDA5480/KX-TDA0484 in the network, you must add 
    it as an Other Unit in a Unit Group (network) when programming with the MCS as shown 
    below:
    Note
    For programming instructions and other information about the KX-TDA0480, refer to the 
    documentation for the KX-TDA0480.
    Restrictions on Feature Compatibility
    Some restrictions exist when using the KX-TDA5480/KX-TDA0484 with the KX-TDA0480, as 
    detailed below:
    CLIP service is the only QSIG service available between the KX-TDA5480/KX-
    TDA0484 and KX-TDA0480. There is no compatibility for other QSIG services.
    Fax communications cannot take place between the KX-TDA5480/KX-TDA0484 and 
    KX-TDA0480. 
    						
    							D1 Considerations in Installation
    Getting Started 75 
    						
    							Panasonic Consumer Electronics Company
    Division of Matsushita Electric Corporation of America
    One Panasonic Way
    Secaucus, NJ 07094
    Panasonic Sales Company
    Division of Matsushita Electric of Puerto Rico, Inc.
    Ave. 65 de Infantería, Km. 9.5 
    San Gabriel Industrial Park
    Carolina, Puerto Rico 00985
    http://www.panasonic.com/csd
    Copyright:
    This manual is copyrighted by Panasonic Communications Co., Ltd. (PCC).
    You may print out this manual solely for internal use with this model. Except above, you may not reproduce 
    this manual in any form, in whole or part, without the prior written consent of PCC and its licensee.
    © 2004 Panasonic Communications Co., Ltd. All Rights Reserved.
    PSQX3126YA   
    KK0104AH1024 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Kx Tda5480 Getting Started Manual