Panasonic Kx T1720 Operating Instructions Manual

nllitfifiiltl [RrEi][FGtuJuuJ [tgJuJl]L!Panasonic
 Operoting Instructions
TONE REMOTE CONTROL
AUTOMATIC TELEPHONE
ANSWERING SYSTEM
Mode,No KX-T1720 E
EASA-eHoNE ig
Thank you for purchasing
the Panasonic Telephone
Answering System.
j:l
tIiO!tano
,o
[.q{
Contents
Please read belore use.
Location of Controls.
lnitial Preparation. . .ConnectionsBasic Operation
How to Record OutgoingMessage (OGM)
Setting Prior lo LeavingListening to MessagesOtherFJature ..L.... :.. : :.- Detailed Operation
How to Adjust...

CPC Switch
fime/Day Stamp Switch
Announce Button
Fast Forward Button
Rewind Button
Line Selector.
Power Switch
Microphone
LINE 1 Button
LINE 2 Button
Location of ControlsConnections
Connect as shown.oUSE Panasonic AC ADAPTOR, KX-A1 l..While operating the unit, the cabinet may feel warm, thisis a normal condition.
To Power Outlet(AC 1 20 V, 60 Hz)
I This unit may not be connected to a coin operated line. lf you are on a party line,check with your local telephone company.
OGM Tape
ICM Tape
OGM-StarV
Stop...

How to Record Outgoing
Message (OGM)
The purpose of the Outgoing message is to inform the calling party that you cannotanswer, but want to record the callers message.
Setting Prior to Leaving
The unit will automatically set to the Answer mode by simply pushing the Power Switch.When the telephone rings, the unit will play back the OGM, then it will record the Callersmessages and the day and time ol the gessage will be recorded on the ICM tape.
@o12.o
oEoq,f.o3
tro
E
oCLo
.9lt,tuo
II
I
rFlE| !l | | , whire...

Listening to MessagesOther Features
when an Incoming message has been recorded, the Liquid crystal Display will show thenumber ol calls and the Answer indicator will flash.In the case of a power interruption, the Liquid Crystal Display will show - - after theoower is restored.@otoo
o!togt:3.0=
.co
(g
{,CLo(,
o$gl
fil r-^ r
;y l*.*i
Auto-Logic (One Touch
Operation)The unit will announce the number ofreceived messages and the ICM tapewill automatically rewind and beginlo play back. At the end of all...

Other
Featufes rcont.r
How to
Adiust Time
How to Operate from
Remote Phone
You can listen to the received Incoming messages f rom a remote localion with a tone
telephone.
Example: 86(on the bottom of the unit)
R€MOTE COOEscrewdriverPUSH CoDt N0. {2dbils)OURITIG IHE OGM
.The unit will not pick
any calls.
.Code No. is lwo digits..Do not use No. 7 as code No.
I The Quick Reference Card (spare) fortone remote control can be found onpage 16.
lf you forgot to set or want to cancel theAnswer mode:
I Toset
DIAI...

How to Operate from
Remote Phon€ (cont.)
How to Operate from
Remote Phone (conr )
0rAL THE PH0NE PUSH C00E ilo. (2 digils)N0. T0 wHlcH OURTNG THE ocMTHE UNIT ISCONNECTEO
oThe unit will announce the numberof the received messages.
rThe unit will rewind the tape withvoice even at tape endand play
back all the received Incomingmessages automatically from thebeginning of the tape.
oEnd of final message will beannounced after the last message.
olf End of tape is announced, lheICM tape is full. Reset the...

How to Operate from
Remote Phone (cont.)Liquid Crystal Display
lf you or a friend do not want lo hear theOutgoing message, the machine can beswitched promptly to the Incomingmessage mode.
t
I
lDIAL THE PHoNE PUSH C0DE NO. (2 digirs)N0. T0 WHICH 0URING TH€ OcMTHE UNIT ISCONI.IECTED
O -L l*t riqht after vou hear thet ;i: LJ-J ainouncementofrhenumber of the receivedmessages. .
.Short beeps will be heardcontinuously untilthe OGM tapehas reset and lhen a long beep willbe heard.
d.1 Speak clearly and loudly...

Cassette Tapes
oFor optimum sound quality andperformance, we recommend you toreplace the OGM and the ICMcassette tapes every six months andto re-record the outgoing messageevery three months supposing that theunit answers calls about ten times everyday.
oNever place a cassette lape near amagnetic source, such as a magnel or aTV set, because this will alfect the tapequality.
oShould the lncoming Message cassettetape break or become worn, replace ilwith a high quality NORMAL tape.Use Panasonic (C-30, C-60,...

Troubleshooting
Guide
Problem
rThe unlt will not workwhen I push any buttons.ol cannot remove thecassette from the unit.
The unit has been set tooperale as an answeringmachine, but no incomingmessages are recorded.
The unit does not function.However, a beep sounds6 times and the answerSndicator flashes on and offquickly.
I have played back all therecorded messages and Iwanl to record the nexiphone call after the lastrecorded message.
I push the button of aremote phone, but the unitdoes not respond.
Some...