Panasonic Kx Prw130 Connect App Guide

Phonebook features
iPhone/iPad
You can use the app’s phonebook features
similarly to the way you use the contacts app
of your smartphone.
Note:
R When using iPad or iPad mini, Smartphone
Connect does not support adding or editing
a contact’s picture.
R Many features of the app function by
accessing the information stored in your
device’s contacts. Depending on the
software version of your device, a dialog
may be displayed that asks whether you
want to allow the app to access your
contacts. You can change...

Turning the answering
system on
1 Start the app and open the  [More] screen.
2 Tap [Connect to answering system]  ®
[Answer on] .
Playing your messages
When your phone system has recorded new
messages, 
 is displayed in the status bar
(Android version only) and your smartphone’s
notification feature displays a notification. To
play back your messages easily, tap the
notification and then use the playback controls
described below.
1 Start the app and open the  [More] screen.
2 Tap [Connect to answering...

Copying data to your
phone system
You can copy various data stored in your
smartphone to your phone system. When data
is being copied, you can confirm the progress
on the handset’s display.
Notes about copying data
R When copying, the estimated copy time is
displayed. If network conditions change, it
may take more time to copy the data.
R If a landline call is received while copying
data, the copy stops. Data copied before
the call was received is retained.
R A handset cannot make calls while it is...

want to copy the contacts’ pictures to,
and then tap  [Send].
Setting phone number
conversion codes
If you store phone numbers in your
smartphone’s contacts using “+” and the
country code, we recommend that you store
the following codes in the base unit.
International code
Store the international dialing prefix that you
need to dial when dialing international phone
numbers manually.
1 Using one of the handsets included with
your phone system, press  MMenu N (right
soft key)  #117
2 Enter the appropriate...

RThis feature only supports ringtones that
are saved on your smartphone’s SD card or
in its user-accessible internal memory.
Built-in ringtones cannot be copied.
Managing handset memory
If you use your smartphone to copy images
(used by your handsets as wallpaper
patterns), pictures (attached to your
smartphone’s contacts), or ringtones, you can
confirm handset memory usage and erase
unnecessary items to make more memory
available.
Confirming memory usage
1 Using one of the handsets included with
your...

Volume settings (Android
version only)
If the output volume for the speaker,
headphones, etc. is too low or too high, you
can use this setting to raise or lower the app’s
master volume. We recommend you use this
setting in conjunction with your smartphone’s
volume controls.
You can also use this setting to raise or lower
the microphone volume (i.e., the volume of
your voice heard by the other party).
1 Start the app and open the  [More] screen.
2 Tap [Settings]  ®  [Volume] .
3 Adjust the volume settings...

Registering your
smartphone to additional
base units
If the app is not registered to a base unit, use
the procedure described on page 5.
1 Start the app and open the  [More] screen.
2 Tap [Settings] .
3 Under  [Registration] , tap [Register to
base] .
4 Select an unused base unit number and
then tap  [OK].
R The app searches for base units
connected to the same wireless
network as your smartphone. If no
base units are found, you can tap
[Search]  to search again.
5 If only one base unit is found:...

Adding a wireless access point
If you expand your wireless network by adding
a wireless access point that uses a different
SSID than your wireless router, use this
procedure to add the wireless access point to
the app’s settings. This allows your
smartphone to connect to the base unit when
your smartphone is connected to the new
access point.
Note:
R The app can store 10 wireless access
points.
R This procedure is not necessary if the
wireless access point uses the same SSID
as your wireless router.
1...

If you experience any trouble
If you experience any trouble with the app’s features, first confirm the following.
R Are your base unit and wireless router turned on and functioning properly?
→ Refer to the operating instructions supplied with your wireless router for troubleshooting information if necessary. Make sure all cables are functioning and firmly connected.
R Have you configured the base unit to connect to your wireless router?
→ Refer to the Smartphone Connect Setup Guide or Operating...

Display messageCause and/or solutionThe base unit didn’t
respond. Please use
another handset to cancel
the registration later.
E2-04R There was a problem when deregistering your smartphone.
→ Use a handset to deregister your smartphone from the base unit.The base unit is not
responding.
E3-01R There is a communication problem.
→ Make sure that the base unit and your wireless router are turned on and functioning, turn your smartphone’s Wi-Fi
feature off and then on again, and then try again.
R The base...