Panasonic Kx Nt136 Information Manual

IP Proprietary Telephone
Quick Reference Guide
Model No.  KX-NT136
Important Information
When using the KX-NT136, keep the following conditions in mind.
•
•
•
••
•
•
If the unit does not operate properly, disconnect the unit from the Ethe\
rnet® cable and thenconnect again.If you are having problems making calls, unplug the Ethernet cable and c\
onnect a knownworking IP Proprietary Telephone (IP-PT).  If the known working IP-PT \
operates properly, havethe defective IP-PT repaired by an authorized...

2
Important Information
WARNING:
TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNITTO RAIN OR MOISTURE.
THIS HANDSET EARPIECE IS MAGNETIZED AND MAY RETAIN SMALL FERROUS OBJECTS\
.
IMPORTANT NOTICE:
• telephone, not dependent on local power, is available for use in an emer\
gency.• Installation Manual for the Panasonic Hybrid IP-PBX.• • and all other applicable laws.  It cannot be reverse engineered, decompi\
led or disassembled.
F.C.C. REQUIREMENTS AND RELEVANT INFORMATION
This equipment...

3 
FeatureOperation
To dial
To an extension 
—assigned as a One-touch Dialing button
To dial
To store
To storedesired no. (max. 32 digits)
3
2
0
Redial
Quick Dialing
One-touch 
Dialing
Operator Call
PersonalSpeed Dialing
SystemSpeed Dialing
Doorphone Call
Automatic Callback Busy
Making Calls
quick dial no.
Callingextension no.
To an outside party
doorphone no. (2 digits)
0
To setTo cancel
466
While hearing a busy tone
While hearing a callback ringWhile hearing a callback ring
outside phone no.
system...

4
Features List
FeatureOperation
Useful Features
Off-hook Monitor
During a conversation using the handset
During a conversation
To set/cancel
Call Park
To set
52
To retrieve
52
C. Tone
Specified
Auto
parking zone no. (2 digits)
stored parking zone no. (2 digits)
Sending a Call 
Waiting Tone 1
While hearing a busy tone
Wait for an answer.
Call Pickup
Log-in/Log-outFor Log-in 
For Log-out
Specified
All
Message 
Waiting 
Caller
Calledextension
To leave a message waiting indicationWhen the called extension...

5
 Using the Call Log or Directories
You can make a call with the call log or directories as follows:Outgoing Call LogIncoming Call LogExtension Number DirectorySystem Speed Dialing DirectoryPersonal Speed Dialing Directory
   Calling with a call log or directory
   Clearing the log information
   
•  or  .
•  To enter characters, refer to 
Press  ENTER .
While on-hook
Press Up or  Down  until the desired item  appears.
Press Left or Right until the  desired log/directory  appears.
Off-hook.
Pres
While...

6
Using the Display Proprietary Telephone
   Storing names and numbers for the Personal Speed Dialing Directory
Accessing the System Features
You can access these features with the Automatic Callback Busy CancelGroup Call PickupDirected Call Pickup Doorphone Call
Door Open
Paging
• 
 
While on-hook
Enter  phone number(max. 32 digits).
Enter name (max. 20 characters).
*
namephone no.
Press  STORE or
OR
Press STORE or
OR
Press CANCEL or PAUSE .
OR
Press Rightfour times. Press Up or  Downuntil the...

7
Using the Display Proprietary Telephone
Entering Characters
You can enter alphabetic characters and digits using the dialing buttons\
.  Pressing a 
dialing button repeatedly displays different characters, as shown in the\
 following tables.
123
1
456789
2
!
3
4
5
6
7
8
9
#
A
D
G
J
M
P
T
W
(space)
$
?1
BCabc2
EFdef3
HIghi4
KLjkl5
NOmn6o
QRSpqrs7
UVt8uv
XYZwxyz9
.,:;0
%&()#
/+—=
0
Table 1 (Standard mode)
£
’
TimesButtons
While entering characters, you 
can move the cursor with the left 
and right...

8
Setting Features
You can customize many features of your telephone as shown in the follow\
ing tables.
Original settings are shown in the gray boxes.  For later reference, pla\
ce a check mark 
in the boxes below to indicate your customized settings.
Press ENTERor STORE.Press  ENTERor STORE .Follow Programming Input.
program no.
Follow Selection& Parameter .
To programTo exitTo enter the programming mode
Press CANCEL or PAUSE .
Selection & ParameterProgramming InputItem
How do you prefer to receive an...

9
Settings on the Programming Mode
Selection & ParameterProgramming InputItem
Would you like to show a message on the callers telephone display?(Absent Message)
40
0
9
No–Off  [Absent Msg Off]
Yes
Yes
Where are your incoming calls forwarded or refused?(Call Forwarding [FWD]/Do Not Disturb [DND])
0Off  [Fwd/DND Off]
1
0
1
Do Not Disturb (DND)  [Do Not Disturb]
Would you like to set your extension PIN or change a stored  extension PIN to new one?  (Extension PIN [Personal  Identification Number])
90
2
To...

10
Location of Controls
PAUSE: storing a telephone number.  Also used toenter and exit the personal programmingmode.
AUTO ANS (Auto Answer)/MUTE: receive an incoming call in hands-free mode or mute the microphone/handset during a conversation.
AUTO DIAL/STORE: Personal Speed Dialing or storing program changes.
Headset Jack
* Headset (not included)Recommended: KX-TCA86, KX-TCA91, KX-TCA92 Do not use a KX-T7090 headset.To order, call toll-free 1-800-332-5368
LCD (Liquid Crystal Display)
 
FLASH/RECALL:...