Panasonic Interface Unit Dmw-yaghpp Owners Manual

VQT5K48
CH0314TY0 -FJ
Owner’s Manual
Interface Unit
Model No.DMW-YAGHPP
Please read these instructions carefully before using this product, 
and save this manual for future use.
PP
If you have any questions, visit:

USA : www.panasonic.com/support 

2VQT5K48 (ENG)
Read this first!
 indicates safety information.
WARNING:
•   To reduce the risk of fire, do not expose this equipment to rain or moisture.
•   T o reduce the risk of fire, keep this equipment away from all liquids. Use 
and store only in locations which are not exposed to the risk of dripping 
or splashing liquids, and do not place any liquid containers on top of the 
equipment.
WARNING:
Always keep accessory (terminal cap) out of the reach of babies and small 
children.
CAUTION:
Do not...

(ENG) VQT5K483
Read this first! (continued)
The rating plate is on the underside of the unit.
CAUTION:
Do not lift the unit or the camera with a tripod attached.
The additional weight on the unit from the attached tripod may damage the 
connection between the unit and the camera, and may result in injuries.
When a tripod is attached, always carry the equipment by the tripod.
 indicates safety information. 

4VQT5K48 (ENG)
Read this first! (continued)
FCC NOTICE (USA)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause 
undesired operation.
CAUTION:
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are...

(ENG) VQT5K485
The unit is exclusively for Panasonic DMC-GH4 digital camera.
Mounting the unit to a digital camera allows you to output 4K, 3G-SDI, and HD-SDI compatible 
video from the SDI terminal and perform video production with higher-quality video.
Two-channel audio input (XLR) is supported with audio level meters available.
You can also input an external timecode to be used as a reference signal.yyWhen the unit is mounted on a digital camera, the electronic sound and electronic shutter 
sound of...

6VQT5K48 (ENG)
„„Handling the unityyThe unit is not splash proof or dust proof.  
Be careful not to allow sand, dust, or water to adhere or enter into the terminal area, digital 
camera, or this unit when attaching or removing this unit.
yy This unit is not waterproof, so it cannot be used underwater.
yy Do not subject the unit to strong shocks or vibration. Doing so may result in malfunction or 
damage.
yy When the unit is mounted on the digital camera, do not use the shoulder strap supplied...

(ENG) VQT5K487
Accessories
yyBe sure to dispose of the packaging materials in an appropriate manner after unpacking the 
unit.
yy The following supplied accessories come attached to the unit.
Terminal cap
(electrical contacts) Terminal cap
(interface contacts) 

8VQT5K48 (ENG)
Names and Functions of Components
418 23451414
1118
109
1812131216 15
719
617
1   HDMI connectio n terminal
Connects to the digital camera’s HDMI 
connector.
2   Electrical contacts
3   Interface contacts
4   Camera attachment pins
5   Attachment scre w
6   Screw hole (1/4-20 UNC)
Attaches to PL
 lens compatibility adapters, 
etc.
7   HDMI terminal
HDMI  Type A output terminal.
(VIERA Link is not supported.) yyUse a high-speed double-shielded 
4K-compatible HDMI cable (up to 2
  m) 
that...

(ENG) VQT5K489
9   TC IN terminal (BNC)
Timecodes are input here.
Input a reference timecode to this terminal 
to synchronize the digital camera’s 
timecode to that of external equipment. yyUse a 5C-FB equivalent double-shielded 
cable to connect to this terminal.
10   SDI OUT [1, 2, 3,  4] terminals (BNC)
Terminals reserved for SDI output.
Resolution setting Output 
terminal
C4K, 4K
 1 to 4
FHD (1080/59.94p, 1080/50p)  1, 2
(same signal)
FHD (Other than the above), HD  1 to 4
(same signal)
yy Use a...

10VQT5K48 (ENG)
Mounting to the Digital Camera
yyMake sure that a DC power supply is not connected to the unit’s DC IN terminal and that the 
digital camera is turned off. 
(Mounting or dismounting while the power is on may result in malfunction.)
1 Remove the cover for the battery grip connector and cover for the interface unit 
connector on the digital camera, and   remove the electrical contact and interface 
contact caps on the unit. yyStore the connector covers and contact caps safely to avoid...