Panasonic Hx Wa30 Owners Manual

							- 151 -
Files recorded using the unit can be copied from the built-in memory to 
an SD card inserted into the unit.
1Set to Playback Mode. (l38)≥Be sure to use a sufficiently charged battery or the AC adaptor.
2Select the menu.
3(On selecting [COPY SELECTED])
Select the file to copy using the SET button and 
press the SET button.
≥ will appear on the selected file. To cancel, press the SET button 
again.
≥ You can continue selecting up to maximum of 100 files.
≥ Press the MENU button to return to the previous step.
(On selecting [COPY ALL])
Select [COPY ALL] to begin copying to the SD card.
Copy/Dubbing
Copying from Built-in Memory to 
SD card
[MENU]:   # [COPY] # desired setting
[COPY SELECTED]:
Copies the selected file to the SD card.
[COPY ALL]:
Copies all files recorded in the built-in memory to the SD card.
2 
						

							- 152 -
4(On selecting [COPY SELECTED])
Press the recording start/stop button or the   
button.
≥When the copying ends, the unit returns to the playback menu.
≥You cannot change the order of the files that are to be copied.
If you intend to delete the original file when the copying has 
finished, always play back the copied file before deletion to 
confirm that the original has been copied normally. 
						

							- 153 -
You can dub by connecting an AV cable.
≥Be sure to use a sufficiently charged battery.
≥ Connecting the AV cable in the wrong direction may cause damage to 
the USB/AV connector of the unit. If the connector has become 
damaged, it may not operate correctly, including failure to recognize 
the cable even if it has been connected.
≥ Images are dubbed in standard quality.
≥ Set to Playback Mode. ( l38)
Copy/Dubbing
Dubbing images onto other video 
devices
Change the video input 
on the video device and 
TV that this unit is 
connected to.
≥The channel set will differ 
depending on the terminal to 
which the unit is connected.
≥ See the operating 
instructions of the video 
device for details.
≥ Insert the plugs as far as 
they will go.
≥ Do not use any other AV 
cables except the supplied 
one.
A AV cable (supplied)
B Turn the side with the 
symbol up to connect.
 
						

							- 154 -
1Connect the unit to the recording equipment and 
begin playback on the unit.
≥Recorded files can be dubbed while a slideshow is being played back. 
(l 127)
≥ If the unit is connected to a video device using an AV cable, the screen 
of the unit will not display images when in Playback Mode. Check on 
the TV screen instead.
2Start recording on the connected device.
≥To stop recording (dubbing), stop playback on this unit after stopping 
recording on the recorder.
≥ Even when [DISPLAY] is set to [OFF], the battery icon will be displayed 
if the battery runs low. Be sure to use a battery which has been 
charged sufficiently.
≥If the date and time display and function indication are not wanted, 
cancel them before dubbing. ( l66)
If the dubbed images are played back on a wide-screen TV, the 
images may be stretched vertically.
In this case, refer to the operating instruction of the device you are 
connecting to or read the operating instructions of the wide-screen TV 
and set the aspect ratio to 16:9. 
						

							- 155 -
By using the Eye-Fi card, you can save files recorded on a card to a PC 
or file-sharing site via a wireless network.
≥Insert the Eye-Fi card.
1Select the menu.
≥The [Eye-Fi] menu only appears when an Eye-Fi card is used.
≥ When the write-protect switch of the Eye-Fi card is locked, the setting 
cannot be made. ( l31)
Copy/Dubbing
Using the Eye-Fi™ card
≥The functions of the Eye-Fi card (including wireless transmission) 
are not guaranteed to work on this product. In the case of a 
malfunction of the card, please contact the card manufacturer.
≥ To use the Eye-Fi transfer feature, a broadband wireless LAN 
environment is required.
≥ To use the Eye-Fi card, permission from the national or regional 
government is required. Do not use if you have not obtained 
permission. If you are unsure as to whether use is permitted, 
please check with the card manufacturer.
≥ Configuring the appropriate security settings (encryption settings) is 
strongly recommended to prevent interception, unauthorized use, 
spoofing or other types of hacking of communication data. Read 
the Eye-Fi card and access point instruction manual for more 
information.
≥ Install the software supplied with the Eye-Fi card in advance 
on your PC, and configure the Eye-Fi settings. (For settings 
methods etc., please read the card operating instructions or 
consult the card manufacturer)
[MENU]:   # [Eye-Fi] # [TRANSFER]  # desired setting
2 
						

							- 156 -
2Select the item to set using the SET button and press 
the SET button.
≥The setting at the time of purchase is [OFF]. Every time the Eye-Fi card 
is removed from the unit, this setting is set to [OFF].
≥ If you select [ALL], all files that can be transferred are automatically 
transferred. To cancel the file transfer, turn off the unit or set to [OFF]. 
3(When [SELECT] is selected in Step 2)
Select the file to transfer using the SET button and 
press the SET button.
≥The selected file is set to be transferred, and   (green) is displayed. 
To cancel, press the SET button again.
≥ Up to 255 files can be selected in succession. 
4Press the   button or the recording start/stop 
button.
≥A confirmation screen for the selection transfer appears.
ALL: Transfers all files that can be transferred.
SELECT:Transfers only selected files.
OFF:Cancels the setting. 
						

							- 157 -
5Select [YES] using the SET button and press the SET 
button.
≥You can check the transfer of the file on the thumbnail screen (8-file 
display).
green: File is set for transfer
white: File waiting for transfer
gray: File has been transferred
orange: File is being transferred
File cannot be transferred 
						

							- 158 -
∫
Using Direct Mode
The files can be transferred directly from the Eye-Fi card to a smartphone 
or tablet without going through the access point when necessary setting 
is performed in a PC in advance.
≥Install the software supplied with the Eye-Fi card on your PC, and 
configure the Direct Mode settings.
≥ Insert the Eye-Fi card.
Select the menu.
≥An SSID and password are displayed. Confirm the displayed content, 
and press the SET button.
≥ If any of the following operations are performed, the Direct Mode will 
be canceled.
jIf you turn the unit off
j Closing the LCD monitor, sending the unit into Standby Mode.
j Starting motion picture or audio recording
The Direct Mode may be canceled by the Eye-Fi card for reasons other 
than the above.
≥ In Direct Mode, the Economy Mode function ( l66) is disabled.
≥ When [TRANSFER] ( l155) is set to [OFF], [START DIRECT MODE] 
cannot be selected.
≥ The Eye-Fi transfer feature cannot be guaranteed to continue to 
operate in the future due to changes to the card specification etc.
≥ Update the firmware of the Eye-Fi card to the latest one using the 
software supplied with the Eye-Fi card before use.
≥ During an Eye-Fi transfer, the Economy Mode function ( l66) is 
disabled.
≥ When the endless memory function of the Eye-Fi card is set to on, the 
files transferred from the card may be deleted automatically.
≥ The Eye-Fi card may heat up as a result of the files being transferred.
≥ When the Eye-Fi card is used, the battery will run down faster.
≥ Audio files cannot be handled.
[MENU]:  
# [Eye-Fi] # [START DIRECT MODE]
2 
						

							- 159 -
≥The Eye-Fi connection status can be checked on the recording standby 
screen or thumbnail screen (1-file display).
≥ Files cannot be transferred during motion picture recording or audio 
recording.
≥ Before deleting the files, please confirm they have been transferred to 
your PC and uploaded to the sharing site.
≥ Do not use the Eye-Fi card in locations where the use of wireless 
devices is forbidden, such as inside aircraft etc.
≥ Depending on network conditions, the transfer may take some time. 
Also, if network conditions deteriorate, the transfer may be suspended.
≥ Files over 2 GB in size cannot be transferred. Such files should first be 
split to reduce the file size. ( l136 )
Lighting gray: Not connected
Blinking white: Connected
Lighting white: Waiting for a connection
Lighting orange: Transferring
Blinking white: Connected with Direct Mode
Lighting white: Waiting for a Direct Mode transfer
Lighting orange:Transferring in Direct Mode
In [Eye-Fi], [TRANSFER] is set to [OFF] 
						

							- 160 -
∫
Use this unit as a wireless LAN device
When using equipment or computer systems that require more reliable 
security than wireless LAN devices, ensure that the appropriate 
measures are taken for safety designs and defects for the systems used. 
Panasonic will not take any responsibility for any damage that arises 
when using this unit for any purpose other than as a wireless LAN device.
∫Use of the Wi-Fi function of this unit is presumed to 
be in countries where this unit is sold
There is the risk that this unit violates the radiowave regulations if used in 
countries other than those where this unit is sold, and Panasonic takes 
no responsibility for any violations.
∫There is the risk that data sent and received via radio 
waves may be intercepted
Please note that there is the risk that data sent and received via radio 
waves may be intercepted by a third party.
∫Do not use this unit in areas with magnetic fields, 
static electricity or interference
≥Do not use this unit in areas with magnetic fields, static electricity or 
interference, such as near microwave ovens. Radio waves may not 
reach this unit.
≥ Using this unit near devices such as cordless telephones or any other 
wireless LAN device that use the 2.4 GHz radio wave band may cause 
a decrease in performance in both devices.
Wi-Fi
Wi-Fi® function [HX-WA30]