Panasonic Hx Wa20 Owners Manual

 VQT4F46 41
2Insert (remove) the SD card into (from) the card slot.
3Close the rear door.
1Unlock the LOCK lever.
2 Slide the open/close lever.
3 Open the rear door.
≥ Face the label side  A in the direction shown in the illustration and 
press it straight in as far as it will go.
≥ Press the center of the SD card and then pull it straight out.
1 Close the rear door.
2 Slide the open/close lever.
3 Lock the LOCK lever.
≥ Lock securely to the points where the red portion of the open/close 
lever and LOCK...

42 VQT4F46
Caution:
Check that the status indicator has gone off.
1Open the battery/card cover.
2Insert (remove) the SD card into (from) the card slot.
≥Face the label side B  in the direction shown in the illustration and 
press it straight in as far as it will go.
≥ Press the center of the SD card and then pull it straight out.
HX-DC2
Status indicator A
≥When this unit is 
accessing the SD card 
or built-in memory, the 
status indicator lights up 
red.



HX-WA20PPPCPU-VQT4F46_mst.book  42 ページ...

 VQT4F46 43
3Close the battery/card cover.
≥Securely close it until it clicks.
≥Do not touch the terminals on the back of the SD card.
≥ Do not shock, bend, or drop the SD card.
≥ Electrical noise, static electricity or the failure of this unit or the SD card 
may damage or erase the data stored on the SD card.
≥ When the status indicator ( l24, 29) illuminates in red, do not:
j Remove the SD card
j Turn the unit off
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
Performing...

44 VQT4F46
Open the LCD monitor and press the power button to 
turn on the unit.
The LCD monitor turns on.
About standby mode
When the LCD monitor is closed while the unit is on, the unit enters 
standby mode which consumes very little power.
In standby mode, opening the LCD monitor turns on the unit, making the 
unit ready for recording immediately. Use standby mode when you stop 
using the unit but intend to use it again after a short time.
Preparation
Turning the unit on/off
/HX-WA20HX-WA2HX-DC2
To...

 VQT4F46 45
≥The unit does not go into standby mode when you close the LCD 
monitor during motion picture recording or audio recording.
≥ If you open the LCD monitor when in standby mode, the unit enters 
recording mode.
≥ In the following cases, opening the LCD monitor does not turn on the 
unit. Press the power button to turn on the unit.
jWhen the unit is  originally purchased
j When you have turned off the unit using the power button
About economy function
To prevent battery consumption due to...

46 VQT4F46
About the high temperature warning icon
If the battery temperature or unit internal temperature (excluding battery) 
rises, the high temperature warning icon   will provide warning as 
indicated below.
A High temperature
≥ When you turn off the unit while the temperature is high (  is 
displayed), you will not be able to turn on the unit again until the 
temperature lowers. (  will flash.)
Battery/unit 
internal 
temperatureScreen 
displayUnit operation
(ON) Although it is possible to...

 VQT4F46 47
Change the mode to recording or playback.
Press the REC/  button.≥Each press of the REC/  button changes the mode.
Preparation
Selecting a mode
/
Recording Mode ( l52, 55, 59) For recording motion pictures, 
still pictures and audio
Playback Mode (
l64, 113) For playing back motion 
pictures, still pictures and audio
HX-WA20HX-WA2HX-DC2
HX-WA20PPPCPU-VQT4F46_mst.book  47 ページ  ２０１２年２月１４日　火曜日　午後５時１０分 

48 VQT4F46
If the screen to set the date and time appears when you turn on the unit, 
skip to step 2 and follow the steps to set the date and time.
1Select the menu. (l68)
2Select an item (DATE/TIME/DISP) using the SET 
button and then tilt the SET button to the right or 
press the SET button.
3(When [DATE] or [TIME] is selected)
Tilt the SET button to the left or right to select the 
desired item and then up and down to set the 
numerical values.
e.g.: When [DATE] is selected
≥The year can be set...

 VQT4F46 49
(When [DISP] is selected)
Select the year/month/day display method using the 
SET button.
4Press the SET button.
5Select [SAVE DATE AND TIME] using the SET button 
and then press the SET button.
≥To return to the recording screen or playback screen, press the MENU 
button.
≥At the time of purchase, the [CLOCK SET] is not set.
≥ If the date and time have not been set or the built-in clock battery has 
run down, the screen display and recording month/day/year 
information will appear as...

50 VQT4F46
∫Basic camera positioning
≥To avoid dropping the unit, be sure to attach a handstrap.
≥ When recording, make sure your footing is stable and there is no 
danger of colliding with another person or object.
≥ When you are outdoors, record pictures with the sunlight behind you. If 
the subject is backlit, it will become dark in the recording.
≥ Keep your arms near your body and separate your legs for better 
balance.
≥ When performing zoom operations, you can prevent the jitter 
associated with...