Panasonic Hx Wa10 Owners Manual

VQT3P35111
ADVANCED OPERATION/PLAYBACK
HINTi If the file size of the video after editing exceeds 4 GB, it is not possible to 
either “SAVE AS NEW” or “OVERWRITE”.
i You will not be able to overwrite the file if the original file is protected. If you 
want it to be erased, you will need to first remove the protection (page 99).
i If the “CARD FULL.” or “Built-in Memory full” message appears, you will 
need to free some of the memory by deleting files that you do not need to 
keep.
i Audio files cannot be...

112VQT3P35
ADVANCED OPERATION/PLAYBACK
Copy (page 57)
Files can be copied from the built-in memory to the SD card.
1 Display Playback Menu 2, select [COPY], and press the SET button.
hThe Copy Screen appears.
2 Select the desired option,  and press the SET button.
[COPY SINGLE]:  Copy files one at a time.
[COPY SELECTED]:  Copy selected files (page 113).
[COPY ALL]:  Copy all the files.

h Use the arrow keys to select the file you wish to copy.
h Proceed to step  3.

h Press the SET button to begin...

VQT3P35113
ADVANCED OPERATION/PLAYBACK
Copying selected filesCopy multiple selected files.
1 Display Playback Menu 2, select [COPY], and press the SET button.
hThe Copy Screen appears.
2 Select [COPY SELECTED], and press the SET button.
hThe screen to select files appears.
3 Use the arrow keys to move the yellow frame to a file you wish to 
copy, and press the SET button.
hA checkmark is superimposed on the selected file.
h To deselect a file, move the yellow frame to the file, and press the SET...

114VQT3P35
ADVANCED OPERATION/PLAYBACK
FILE INFO DISPLAY
You can check what the settings were when a file was recorded with your 
camera.
1 Set the camera to the playback mode (page 47).
2 Select the image for which you wish to display the information.
h Toggle the SET button up, down, left or right to move the yellow frame 
to the file you wish to play back.
3 Press the MENU button for 
at least 1 second.
hThe Information Screen 
appears.
h If the MENU button is 
pressed again, the 
Information Screen...

VQT3P35115
OPTION SETTINGS
OPTION SETTINGS
OPTION SETTINGS
DISPLAY THE OPTION SETTING 
MENU
The camera settings are executed via the Option Setting Menu.
1 Turn on the camera, and press 
the MENU button.
2 Select an Option tab (1, 2 or 3).
hThe Option Setting Menu 
appears.
h If you press [ H], the screen to 
select a setting to change 
appears.
To access a Setting Screen
3 Press [ I] or [J ] to select the item you wish to set, and press the SET 
button.
h The Setting Screen for the selected item...

116VQT3P35
OPTION SETTINGS
INTRODUCTION TO THE OPTION 
SETTING MENU
Ta b  1
3 2
1
2
31
6
5
4
3
2
1
OPTION MENU 1
CLOCK SET
ALERT SOUND
DISPLAY
ECONOMY
BRIGHTNESS
ENTER 

VQT3P35117
OPTION SETTINGS
1CLOCK SET setting (page 44)
h Set the camera’s clock.
2 ALERT SOUND setting
h Settings for the types and 
volume of the camera’s 
operation sounds.
TURN ON/OFF:
Mute or enable the sounds 
when the camera is turned 
on or off.
SHUTTER: Select the sound that is 
produced when the [ O] 
button is pressed.
KEY SW: Select the sound that is 
produced when the SET 
button, MENU button, etc. 
are pressed.
OPERATION VOL: Adjust the volume of the 
operation sounds.
ALL OFF: The...

118VQT3P35
OPTION SETTINGS
Ta b  2
3 2
1
2
31
5
4 3
2
1OPTION MENU 2
LANGUAGE
TV OUTPUT
INITIAL SET
FORMAT
ENTER 

VQT3P35119
OPTION SETTINGS
1LANGUAGE setting
h Select the language in which 
the LCD monitor messages 
are displayed.
2 TV OUTPUT setting (page 122)
3 INITIAL SET
h Reset the camera settings to 
the factory-preset settings.
h The following settings do not 
change with this procedure:
Date and time setting
Language setting
4 FORMAT (page 130)
FORMAT: Logical format of the SD 
card or the built-in memory is 
executed.
DELETE DATA: Physical format of the SD 
card or the built-in memory is 
executed.
5...

120VQT3P35
OPTION SETTINGS
Ta b  3
3 2
1
2
3 1
OPTION MENU 3
4
3
1,2
ENTER
REC FOLDER
FILE NO. CONTD