Panasonic Hx Wa03 Owners Manual

- 61 -
5Select the setting content using the SET button and 
press the SET button to set.
∫ About applicable mode indicator
In the recording menu, the Recording Mode that reflects the currently 
displayed setting is displayed.
C Applicable mode indicator
: Setting is applied to still picture and motion picture recording.
:  Setting is applied to still picture recording.
:  Setting is applied to motion picture recording.
To get back to the previous screenPress the MENU button.
To end the menu settingPress...

- 62 -
Using the Simple Menu
You can easily set the functions useful for recording.
1Press the MENU button. 
2Tilt the SET button to the left. 
3Select the   tab using the SET button, and press 
the SET button.
≥To return to the normal menu, select the   tab and press the SET 
button.
4Select from menu items using the SET button, and tilt 
the SET button to the right, or press the SET button.
5Select the setting content using the SET button and 
press the SET button to set.
≥Items other than those...

- 63 -
Select the menu.
Please refer to page 
39.
Opening the LCD monitor will switch from Standby Mode to Recording 
Standby Status in approximately 0.5 seconds (in Recording Mode only).
≥ When in Quick Start Standby Mode about 50% of the power used 
in recording standby mode is being consumed, so the recording 
time will be reduced.
≥ Set to Recording Mode. ( l38)
1 Select [QUICK START] with the SET button and press the SET 
button.
2 Select [ON] with the SET button and 
press the SET button.
3 Close...

- 64 -
4Open the LCD monitor.
The status indicator  A will turn off and switch 
to Recording Standby Status.
≥ If Quick Start standby mode has been set by 
pressing the power button for a short time, 
pressing any of the buttons on the unit will 
set the status to Recording Standby Status.
≥Quick Start Standby Status will be unlocked after approximately 5 
minutes and will switch to Standby Mode. If Quick Start Standby Mode 
is set during file transfer in Direct Mode ( l158) of the Eye-Fi card, the 
unit...

- 65 -
Set the type and volume of operation sounds for the unit.
[ALERT SOUND]
[TURN ON/OFF]:
Sets the sound emitted when the unit is turned on/off. ([ON]/[OFF])
[RECORD BEEP]:
Sets the sound emitted when recording is started and stopped. 
([ON]/[OFF])
[SHUTTER]:
Sets the sound emitted when the   button is pressed. 
([OFF]/[A]/[B]/[C]/[D])
[KEY SW]:
Sets the sound emitted when the buttons (SET button, MENU button, 
etc.) are pressed. ([OFF]/[A]/[B]/[C]/[D])
[OPERATION VOL]:
Sets the volume of the...

- 66 -
Switch [ON] (Display) or [OFF] (No Display) of the date and time display, 
etc.
Set the standby time for the unit to switch to Standby Mode. (l36)
≥ The ECONOMY function will not work  when the Wi-Fi function is in 
use.
Sets the brightness of the LCD monitor of the unit (7 steps).
[DISPLAY]
[ECONOMY]
[BATTERY:REC]:Sets the time for which the unit is in the 
Recording Mode using the battery, before it 
goes into Standby Mode. 
([OFF]/[1 min]/[3 min]/[5 min]/[10 min])
[BATTERY:PLAY]:Sets the time...

- 67 -
You can select the language on the screen display and the menu screen.
Returns the unit settings to the settings at the time of purchase.
≥Settings for [CLOCK SET], [LANGUAGE] and the double range zoom 
(  /  ) will not be changed.
Returns the Wi-Fi settings to the settings at the time of purchase.
≥ The Wi-Fi password is also deleted.
OPTION MENU 2
[LANGUAGE]
[TV OUTPUT]
[TV SYSTEM]:Please refer to page  148.
[TV ASPECT]:Please refer to page 147.
[HDMI]:Please refer to page 148.
[VIERA...

- 68 -
Please be aware that if a medium is formatted, then all the data recorded 
on the medium will be erased and cannot be restored. Back up important 
data on a PC, disc, etc. (l191)
≥ To format the built-in memory, perform a format with the SD card 
removed.
Select [FORMAT] or [DELETE DATA] using the SET button and 
press the SET button.
≥ When selecting [DELETE DATA], please use the AC adaptor. When 
using the battery, [DELETE DATA] cannot be selected.
≥ Select [DELETE DATA] and perform a physical...

- 69 -
Creates or selects a recording folder (folder containing a recorded file). 
(SD card recording only)
≥Insert the SD card.
≥ Set to Recording Mode. ( l38)
1 Select [REC FOLDER] using the SET button and press the SET 
button.
2
(When creating a folder) Select [CREATE NEW FOLDER] using the SET button and press 
the SET button.
≥ The created folder is set as the recording folder.
(When selecting a folder) Select the folder number of the desired folder using the SET 
button and press the SET button....

- 70 -
When the SD card or built-in memory contains multiple folders, you can 
select a folder for playback.
≥Set to Playback Mode. ( l38)
1 Select [PLAYBACK FOLDER] using the SET button and press 
the SET button.
2 Select the folder to play back using the SET button and press 
the SET button.
≥ All the recorded files are displayed in the thumbnail screen, and yellow 
frame is displayed on the first file in the selected folder.
3 Select the file to playback using the SET button and press the 
SET...