Panasonic Household Massage Lounger Ep1017 Operating Instructions

11
LEG MASSAGER OPERATION
The leg massager has two functions. When raised, it functions as a calf massager. The ottoman raises
automatically when the chair is reclined.
The massager can also massage the soles of the feet. This can be done either when the ottoman is down
(and the chair is upright), or when the chair is reclined.
1. To operate the leg massage, press the leg massage
“on/off” button. Check to make sure that the operation
indicator lamp on the leg massage on/off button is lit.
2. To turn off...

12
PROGRAMMED MASSAGE
First read and familiarize yourself with the safety and operating precautions.
1. Press the “on/off” button.
2. Use the “massage heads adjustment” button (neck roller
position) to toggle from the highest (tallest) setting “1” to the
lowest (shortest) setting “5”, in order to set the massage heads
to the desired position for your neck.
Massage heads (rollers) should rest comfortably at the top of
your shoulders prior to the start of the massage.
 This button is to limit the height...

13
Manual   Operation
up
downkneadtap
roll
intensitydownup
stroke
24in.
4in.
width
narrow
wide
MANUAL MASSAGE
First read and familiarize yourself with the safety and operating precautions.
Kneading massage (upward & downward)
Press the button for the desired massage.
 The currently operating massage is indicated by the
massage indicator lamps.
 It is possible to combine different massage types.
Kneading (upward/downward) massage
Tapping massage
Rolling massage
NOTE:
 Do not massage any one point for...

14
: possible,    : not possible
MANUAL MASSAGE
Kneading rolling massage
1. Press the “knead”  button and the “roll”  button.
The massage heads start the kneading rolling massage.
2. To raise the massage heads, press the “up”  button. To lower them, press the “down”  button.
 All functions that include rolling are available for the entire back, or for a limited section of the back, by
pressing the “stroke” adjustment button.
3. To adjust the intensity of massage, press the “intensity”  buttons.
NOTE:...

15
Massage heads up-down adjustment
Use of the up or down adjustment button allows you to adjust the up and down
direction of the massage heads.
To move the massage heads up, press and hold the “up”  button. To lower
them, press the  “down”  button. You must hold the button down until you reach
the spot you want.
Massage heads width adjustment (See page 18.)
Use of the width (narrow or wide) adjustment button allows you to select the width
between the massage heads (available only in the tapping,...

16
BACK CUSHION AND HEADREST
CUSHION INSERT PAD
 Fasten the back cushion to the chair and the headrest and insert the weighted flap through the strap
attached behind the chair.
 If you prefer a stronger massage, remove the back cushion.
 When the massage function will be used, remove the headrest or flip the headrest over the back of the chair
before starting the massage.
NOTE:
 This massage lounger is capable of providing a vigorous “shiatsu” massage. The rolling and tapping action
are very strong,...

17
15
10
2
938476
15
10
2
938476
15
10
2
938476
DETAILS OF PROGRAMMED MASSAGE
Whole back course
Neck and shoulder course
Complete massage
including neck,
shoulders, back
stretching and lower
backRolling Tapping rolling/
Kneading rollingUpward
kneadingDownward/
upward kneadingTapping
Rolling Kneading rolling/
RollingUpward kneading/
Kneading rolling Tapping Kneading rolling/
Tapping rolling
Concentrated
massage of neck
and shouldersRolling Tapping rolling/
Kneading rollingUpward
kneadingDownward/
upward...

18
MASSAGE HEADS’ RANGE OF MOVEMENT
 The vertical movement of the massage heads can be set for different areas, giving you a massage any place
you like from the neck to the lower back for all massage types.
Kneading (upward/downward), Kneading rolling, and Regional kneading rolling.
Massage range width: 2 15/16 in. (75 mm) (width cannot be adjusted)
Tapping, Rolling, Regional rolling, Tapping rolling, and Regional tapping rolling
Massage range width: 3 5/16 in. or 4 5/16 in. (85 mm or 110 mm)
The width...

19
TROUBLESHOOTING GUIDE
Before requesting service for this unit, check the table below for the possible cause of the problem. Some
simple checks or minor adjustment on your part may eliminate the problem and restore proper operation. If
you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the
problem, call us at 1-800-338-0552 to locate the servicer near to you.
Problem Probable cause(s) Suggested remedy
Plug the power cord into an AC outlet
(120 V)....

20
SPECIFICATIONS
Power source:120 V AC, 60 Hz
Power consumption:200 W
Kneading speed:Approx. 28 times/min.
Tapping speed:Approx. 500 times/min. (per side)
Rolling massage speed:Approx. 1 cycle every 37 sec.
Massage width:Shoulder / lower back section: Approx. 2 15/16 in. (75 mm)
Back rolling width/tapping width: Narrow: Approx. 3 5/16 in. (85 mm)
Wide: Approx. 4 5/16 in. (110 mm)
Massage heads up/down travel:Approx. 23 5/8 in. (600 mm)
Regional back rolling:Automatic repetition within approx. 4 3/4 in....