Panasonic Home Theater Audio System Sc Htb20 Owners Manual
Here you can view all the pages of manual Panasonic Home Theater Audio System Sc Htb20 Owners Manual . The Panasonic manuals for Home Audio are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
Getting started
21
Operations
VQT4D53
0Q FS BUJ PO TUsing this unit
Preparation≥Turn on the TV.
Press [ Í] to turn on the system.
Select the source. (> 6)
≥This remote control cannot be used to control the operations
of the connected devices.
∫ When “BD/DVD” or “AUX” is selected
as the source
On the connected device:Select the TV’s input for this unit and start the playback on
the connected device.
Press [ iVOL j] to adjust the
volume of the speakers.
≥ Volume range: 1 to 100§
Press [ iSUBWOOFER j]...](http://img.usermanuals.tech/thumb/58/66823/w300_sc-htb20_en_om_d-20.png "Page 21
Getting started
21
Operations
VQT4D53
0Q FS BUJ PO TUsing this unit
Preparation≥Turn on the TV.
Press [ Í] to turn on the system.
Select the source. (> 6)
≥This remote control cannot be used to control the operations
of the connected devices.
∫ When “BD/DVD” or “AUX” is selected
as the source
On the connected device:Select the TV’s input for this unit and start the playback on
the connected device.
Press [ iVOL j] to adjust the
volume of the speakers.
≥ Volume range: 1 to 100§
Press [ iSUBWOOFER j]...")
Getting started 21 Operations VQT4D53 0Q FS BUJ PO TUsing this unit Preparation≥Turn on the TV. Press [ Í] to turn on the system. Select the source. (> 6) ≥This remote control cannot be used to control the operations of the connected devices. ∫ When “BD/DVD” or “AUX” is selected as the source On the connected device:Select the TV’s input for this unit and start the playback on the connected device. Press [ iVOL j] to adjust the volume of the speakers. ≥ Volume range: 1 to 100§ Press [ iSUBWOOFER j]...
Page 22
![Page 22
22
VQT4D53
This system provides a feeling that the sound and
the image are as one. The 3D sound effect will be
applied to Multi-channel audio sources as a factory
preset.
Dolby Virtual Speaker and the 3D surround effects can be
turned off and on by changing the audio output mode settings.
This setting will change the level of the Clear-mode
dialog effect. (>left)
Press [ iDIALOG LEVEL j] to
display the current level.
While the level is displayed:
Press [ iDIALOG LEVEL j] to
adjust the level.
≥...](http://img.usermanuals.tech/thumb/58/66823/w300_sc-htb20_en_om_d-21.png "Page 22
22
VQT4D53
This system provides a feeling that the sound and
the image are as one. The 3D sound effect will be
applied to Multi-channel audio sources as a factory
preset.
Dolby Virtual Speaker and the 3D surround effects can be
turned off and on by changing the audio output mode settings.
This setting will change the level of the Clear-mode
dialog effect. (>left)
Press [ iDIALOG LEVEL j] to
display the current level.
While the level is displayed:
Press [ iDIALOG LEVEL j] to
adjust the level.
≥...")
22 VQT4D53 This system provides a feeling that the sound and the image are as one. The 3D sound effect will be applied to Multi-channel audio sources as a factory preset. Dolby Virtual Speaker and the 3D surround effects can be turned off and on by changing the audio output mode settings. This setting will change the level of the Clear-mode dialog effect. (>left) Press [ iDIALOG LEVEL j] to display the current level. While the level is displayed: Press [ iDIALOG LEVEL j] to adjust the level. ≥...
Page 23
![Page 23
Operations
23
VQT4D53
As a factory preset, Dolby Virtual Speaker and the
3D surround effects will be applied to Multi-channel
audio sources, such as those from a Blu-ray Disc
player or DVD player, etc.
By changing the audio output setting, it is possible
to apply the Dolby Virtual Speaker and 3D surround
effects to 2ch audio sources, such as the audio
from the TV.
Press and hold [MUTE] for more
than 2 sec.
≥The indicator for the current setting blinks for 10 sec.
While the indicator is blinking,...](http://img.usermanuals.tech/thumb/58/66823/w300_sc-htb20_en_om_d-22.png "Page 23
Operations
23
VQT4D53
As a factory preset, Dolby Virtual Speaker and the
3D surround effects will be applied to Multi-channel
audio sources, such as those from a Blu-ray Disc
player or DVD player, etc.
By changing the audio output setting, it is possible
to apply the Dolby Virtual Speaker and 3D surround
effects to 2ch audio sources, such as the audio
from the TV.
Press and hold [MUTE] for more
than 2 sec.
≥The indicator for the current setting blinks for 10 sec.
While the indicator is blinking,...")
Operations 23 VQT4D53 As a factory preset, Dolby Virtual Speaker and the 3D surround effects will be applied to Multi-channel audio sources, such as those from a Blu-ray Disc player or DVD player, etc. By changing the audio output setting, it is possible to apply the Dolby Virtual Speaker and 3D surround effects to 2ch audio sources, such as the audio from the TV. Press and hold [MUTE] for more than 2 sec. ≥The indicator for the current setting blinks for 10 sec. While the indicator is blinking,...
Page 24
24 VQT4D53 Linked operations with the TV (VIERA Link TM “HDAVI ControlTM”) Preparation1Confirm that the HDMI connection has been made. ( >18, 19) 2 Set the “HDAVI Control” operations on the connected equipment (e.g., TV). 3 For optimal “HDAVI Control” operations, change the following settings on the connected TV §1. ≥ Set the default speaker settings to this system. §2 ≥Set the speaker selection settings to this system. 4 Turn on all “HDAVI Control” compatible equipment and select the TV’s input...
Page 25
![Page 25
Operations
25
VQT4D53
Advanced operations
Change the dual audio from main to secondary.
1Confirm the digital audio output setting on the
connected TV or player, etc. is set to “Bitstream”.
2 Press and hold [TV] for more than 2 sec.
3 While the indicator of the current setting is blinking,
press [TV] to change the setting.
≥ The setting works only when the dual audio is available
in the audio source.
≥ The setting is maintained until it is changed again.
≥ The same setting is used for [TV] and...](http://img.usermanuals.tech/thumb/58/66823/w300_sc-htb20_en_om_d-24.png "Page 25
Operations
25
VQT4D53
Advanced operations
Change the dual audio from main to secondary.
1Confirm the digital audio output setting on the
connected TV or player, etc. is set to “Bitstream”.
2 Press and hold [TV] for more than 2 sec.
3 While the indicator of the current setting is blinking,
press [TV] to change the setting.
≥ The setting works only when the dual audio is available
in the audio source.
≥ The setting is maintained until it is changed again.
≥ The same setting is used for [TV] and...")
Operations 25 VQT4D53 Advanced operations Change the dual audio from main to secondary. 1Confirm the digital audio output setting on the connected TV or player, etc. is set to “Bitstream”. 2 Press and hold [TV] for more than 2 sec. 3 While the indicator of the current setting is blinking, press [TV] to change the setting. ≥ The setting works only when the dual audio is available in the audio source. ≥ The setting is maintained until it is changed again. ≥ The same setting is used for [TV] and...
Page 26
![Page 26
26
VQT4D53
∫To reduce the clear-mode dialog effect
When the dialog does not sound natural while the volume
is set low, for example, it is possible to reduce the dialog
enhancing effect as follows:
Press and hold [TV] on the remote control and [ sVOL] on
the active subwoofer for more than 2 sec.
∫ To turn off VIERA Li nk “HDAVI Control”
When “HDAVI Control” compatible equipment does not
work well with this system, for example, it is possible to
turn off this function as follows:
≥When VIERA Link is...](http://img.usermanuals.tech/thumb/58/66823/w300_sc-htb20_en_om_d-25.png "Page 26
26
VQT4D53
∫To reduce the clear-mode dialog effect
When the dialog does not sound natural while the volume
is set low, for example, it is possible to reduce the dialog
enhancing effect as follows:
Press and hold [TV] on the remote control and [ sVOL] on
the active subwoofer for more than 2 sec.
∫ To turn off VIERA Li nk “HDAVI Control”
When “HDAVI Control” compatible equipment does not
work well with this system, for example, it is possible to
turn off this function as follows:
≥When VIERA Link is...")
26 VQT4D53 ∫To reduce the clear-mode dialog effect When the dialog does not sound natural while the volume is set low, for example, it is possible to reduce the dialog enhancing effect as follows: Press and hold [TV] on the remote control and [ sVOL] on the active subwoofer for more than 2 sec. ∫ To turn off VIERA Li nk “HDAVI Control” When “HDAVI Control” compatible equipment does not work well with this system, for example, it is possible to turn off this function as follows: ≥When VIERA Link is...
Page 27
Reference Operations 27 VQT4D53 The power on this system is turned off when the TV’s speakers are selected in the speaker control. This is a normal feature when using VIERA Link (HDAVI Control 4 or later). For details please read the operating instructions for the TV on its power save feature. (>24) This system does not operate correctly.If the HDMI cable is connected to the wrong terminal (HDMI IN or HDMI OUT), this system will not operate correctly. Turn this system off, disconnect the AC power...
Page 28
28 VQT4D53 Indicator illumination The indicators display the condition of this system by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Refer to “Troubleshooting” ( >26) if the indicators do not light as illustrated below. §The selected source indicator will also light. Indicator Description The indicators blink from left to right ( i) or from right to left ( s). ≥ When the speaker volume, the...
Page 29
Reference 29 VQT4D53 Specifications 1 Specifications are subject to change without notice. 2 Weight and dimensions are approximate. 3 Total harmonic distortion is measured by a digital spectrum analyzer. 4 Total harmonic distortion is measured by using AES17 filter. AMPLIFIER SECTION RMS output power 10 % total harmonic distortion Subwoofer ch 110 W per channel (100 Hz, 3≠) Front ch (L, R ch) 65 W per channel (1 kHz, 6 ≠) Total RMS Dolby Digital mode power 240 W FTC output power 1.0 % total harmonic...
Page 30
30 VQT4D53 Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Home Audio Products Limited Warranty Limited Warranty Coverage (For USA and Puerto Rico Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North America (referred to as “the warrantor”) will, for...