Panasonic Home Theater Audio System Sc Ht56 Operating Instructions
Here you can view all the pages of manual Panasonic Home Theater Audio System Sc Ht56 Operating Instructions . The Panasonic manuals for Home Audio are available online for free. You can easily download all the documents as PDF.
Page 11
11 RQTX0175 TRA N SMITTERDIGITALPUSHPUSH 2 3 1 1 2 AC IN~ AC IN~ Auto speaker setup STEP 4 Auto speaker setup Auto speaker setup allows you to achieve a satisfactory listening environment easily with the use of the supplied calibration microphone as a detector of sound signals. The unit will first perform automatic speaker detection, then checks and adjusts the following settings. Process for auto speaker setup Loud test tones are output from the speakers during setup, so keep children out of the room....
Page 12
![Page 12
12
RQTX0175
a) Press and hold .[
AUTO SPEAKER SETUP] indicator starts flashing.
“AUTO SETUP” appears on the display.
b) The unit checks that you have correctly connected the calibration micr
ophone.
c) The automatic setup starts with STEP 1, STEP 2, and STEP 3 calibration as f
ollows.
STEP1 – DETECTION/DISTANCE STEP2 – FREQUENCY
STEP3 – LEVEL
For y
our reference
Loud test tones are output from each speaker during the configuration.
During setup, operations may stop when there is an error...](http://img.usermanuals.tech/thumb/58/66802/w300_sc-ht56_en_om_d-11.png "Page 12
12
RQTX0175
a) Press and hold .[
AUTO SPEAKER SETUP] indicator starts flashing.
“AUTO SETUP” appears on the display.
b) The unit checks that you have correctly connected the calibration micr
ophone.
c) The automatic setup starts with STEP 1, STEP 2, and STEP 3 calibration as f
ollows.
STEP1 – DETECTION/DISTANCE STEP2 – FREQUENCY
STEP3 – LEVEL
For y
our reference
Loud test tones are output from each speaker during the configuration.
During setup, operations may stop when there is an error...")
12 RQTX0175 a) Press and hold .[ AUTO SPEAKER SETUP] indicator starts flashing. “AUTO SETUP” appears on the display. b) The unit checks that you have correctly connected the calibration micr ophone. c) The automatic setup starts with STEP 1, STEP 2, and STEP 3 calibration as f ollows. STEP1 – DETECTION/DISTANCE STEP2 – FREQUENCY STEP3 – LEVEL For y our reference Loud test tones are output from each speaker during the configuration. During setup, operations may stop when there is an error...
Page 13
![Page 13
13
RQTX0175
Settings
2aSelect and press [ENTER].
R efer to pages 13 and 14 for each item settings.
For “REMOTE”, refer to page 21.
For “RESET”, refer to page 19.
•
•
•
2b
Select and press [ENTER]. P r e s s r e p e a t e d l y
until “EXIT” appears.
Press and hold.
DISTANCE ↔ AUTO SETUP
↔ INPUT
MODE ↔ HDMI
↔ DRCOMP
↔
ATTENUATOR ↔ REMOTE
↔ TV DELAY
↔
RESET ↔ EXIT
Enter the
setup mode. 1 Select the item you want to change.2 Change the
setting.3Exit the
setup mode.4
Press [ENTER] to...](http://img.usermanuals.tech/thumb/58/66802/w300_sc-ht56_en_om_d-12.png "Page 13
13
RQTX0175
Settings
2aSelect and press [ENTER].
R efer to pages 13 and 14 for each item settings.
For “REMOTE”, refer to page 21.
For “RESET”, refer to page 19.
•
•
•
2b
Select and press [ENTER]. P r e s s r e p e a t e d l y
until “EXIT” appears.
Press and hold.
DISTANCE ↔ AUTO SETUP
↔ INPUT
MODE ↔ HDMI
↔ DRCOMP
↔
ATTENUATOR ↔ REMOTE
↔ TV DELAY
↔
RESET ↔ EXIT
Enter the
setup mode. 1 Select the item you want to change.2 Change the
setting.3Exit the
setup mode.4
Press [ENTER] to...")
13 RQTX0175 Settings 2aSelect and press [ENTER]. R efer to pages 13 and 14 for each item settings. For “REMOTE”, refer to page 21. For “RESET”, refer to page 19. • • • 2b Select and press [ENTER]. P r e s s r e p e a t e d l y until “EXIT” appears. Press and hold. DISTANCE ↔ AUTO SETUP ↔ INPUT MODE ↔ HDMI ↔ DRCOMP ↔ ATTENUATOR ↔ REMOTE ↔ TV DELAY ↔ RESET ↔ EXIT Enter the setup mode. 1 Select the item you want to change.2 Change the setting.3Exit the setup mode.4 Press [ENTER] to...
Page 14
14 RQTX0175 Settings Output the signal. Adjust the main volume.Select the speaker channel. Adjust the level. Stop the test signal. VOL C +4dBPress and hold. Repeat for each speaker channel C (center), RS (surround right) and LS (surround left) can be adjusted between -6 dB and +6 dB, with 0 dB being the level of the front speakers. Adjust center and surround output to the same apparent level of the front speakers. F or SUBW (subwoofer), you can select “SUBW OFF” so there...
Page 15
15 RQTX0175 Basic operations TUNER FMTV TUNER AM BD/DVR D VD-P 1234 Switch on. Select input. Start play of the source.The unit sets the sound mode to suit the input signal. Adjust the volume. PL MOVIE Use this mode when playing movie software recorded in Dolby Surround. MUSIC Adds surround effects to stereo sources. PANORAMA S ound is spread out more so you feel like you are surrounded by music. LIVE Brings you up close for “live” stage performance and...
Page 16
16 RQTX0175 MENU operation MENU operation This is an outline of the operations you can perform with the MENU. T U N E RF M M O D E M E M O RY AU T O M E M O T U N E M O D E B E AT P R O O FM O D E 1 M O D E 2 AU T OE X I T E X I T M O N O M E M O C H 1 M E M O C H 3 0 S TA R T C A N C E L M A N U A L P R E S E T B A S S 0 T R E B L E 0 B A L A N C E D I M M E R O F FD I M M E R O F F D I M M E R 1 D I M M E R 2 D I M M E R...
Page 17
![Page 17
17
RQTX0175
The radio
21
The radio
Press [INPUT SELECTOR < or >]
to select “TUNER FM” or “TUNER
AM”.Select the frequency.
Auto tuning starts if you press and
hold the button.
Direct tuning
Input the frequency of the station.Remote control
1. Press [TUNER, ―BAND] to select “TUNER”.
2. Press and hold [TUNER , ―BAND] to select “TUNER
FM” or “TUNER AM”.
3.
Press [TUNER DIRECT TUNING].
4. Press the numbered buttons to enter the frequency.
e.g. To select 107.9 MHz, press [1] → [0]
→ [7]
→...](http://img.usermanuals.tech/thumb/58/66802/w300_sc-ht56_en_om_d-16.png "Page 17
17
RQTX0175
The radio
21
The radio
Press [INPUT SELECTOR < or >]
to select “TUNER FM” or “TUNER
AM”.Select the frequency.
Auto tuning starts if you press and
hold the button.
Direct tuning
Input the frequency of the station.Remote control
1. Press [TUNER, ―BAND] to select “TUNER”.
2. Press and hold [TUNER , ―BAND] to select “TUNER
FM” or “TUNER AM”.
3.
Press [TUNER DIRECT TUNING].
4. Press the numbered buttons to enter the frequency.
e.g. To select 107.9 MHz, press [1] → [0]
→ [7]
→...")
17 RQTX0175 The radio 21 The radio Press [INPUT SELECTOR < or >] to select “TUNER FM” or “TUNER AM”.Select the frequency. Auto tuning starts if you press and hold the button. Direct tuning Input the frequency of the station.Remote control 1. Press [TUNER, ―BAND] to select “TUNER”. 2. Press and hold [TUNER , ―BAND] to select “TUNER FM” or “TUNER AM”. 3. Press [TUNER DIRECT TUNING]. 4. Press the numbered buttons to enter the frequency. e.g. To select 107.9 MHz, press [1] → [0] → [7] →...
Page 18
![Page 18
18
RQTX0175
Sound field
Adjusting SFC
You can adjust the sound field by adjusting the level of the
speakers. This adjustment can be made for each SFC mode
(➡ page 15).
1. Press [-LEVEL, ―TEST] to select the speaker
channel.
Each time you press the button:
C → RS
→ LS
→ SUBW
2.
Press [-] or [+] to adjust the level.
C, RS, and LS: -6 dB to +6 dB
SUBW: OFF ↔ MIN
↔ 1 - 19
↔ MAX
Remote control
Center focus
Use with discs where the dialogue is recorded in the center...](http://img.usermanuals.tech/thumb/58/66802/w300_sc-ht56_en_om_d-17.png "Page 18
18
RQTX0175
Sound field
Adjusting SFC
You can adjust the sound field by adjusting the level of the
speakers. This adjustment can be made for each SFC mode
(➡ page 15).
1. Press [-LEVEL, ―TEST] to select the speaker
channel.
Each time you press the button:
C → RS
→ LS
→ SUBW
2.
Press [-] or [+] to adjust the level.
C, RS, and LS: -6 dB to +6 dB
SUBW: OFF ↔ MIN
↔ 1 - 19
↔ MAX
Remote control
Center focus
Use with discs where the dialogue is recorded in the center...")
18 RQTX0175 Sound field Adjusting SFC You can adjust the sound field by adjusting the level of the speakers. This adjustment can be made for each SFC mode (➡ page 15). 1. Press [-LEVEL, ―TEST] to select the speaker channel. Each time you press the button: C → RS → LS → SUBW 2. Press [-] or [+] to adjust the level. C, RS, and LS: -6 dB to +6 dB SUBW: OFF ↔ MIN ↔ 1 - 19 ↔ MAX Remote control Center focus Use with discs where the dialogue is recorded in the center...
Page 19
![Page 19
19
RQTX0175
Sleep timer
The SLEEP timer can turn the unit off after a set time.
It does not control any other components.
1. Use the menus to select “SLEEP”.
➡ MENU operation on page 16.
2.
Press [TUNE 2 / - or
1 / +] to select the time
(in minutes).
The display changes as follows:
SLEEP OFF ↔
SLEEP 30
↔ SLEEP 60
↔ SLEEP 90
↔ SLEEP 120
To check the setting
1. Press [-MENU] to enter the main menu.
2. Press [TUNE 2 / - or
1 / +] to select “SLEEP”.
The time remaining appears.
To...](http://img.usermanuals.tech/thumb/58/66802/w300_sc-ht56_en_om_d-18.png "Page 19
19
RQTX0175
Sleep timer
The SLEEP timer can turn the unit off after a set time.
It does not control any other components.
1. Use the menus to select “SLEEP”.
➡ MENU operation on page 16.
2.
Press [TUNE 2 / - or
1 / +] to select the time
(in minutes).
The display changes as follows:
SLEEP OFF ↔
SLEEP 30
↔ SLEEP 60
↔ SLEEP 90
↔ SLEEP 120
To check the setting
1. Press [-MENU] to enter the main menu.
2. Press [TUNE 2 / - or
1 / +] to select “SLEEP”.
The time remaining appears.
To...")
19 RQTX0175 Sleep timer The SLEEP timer can turn the unit off after a set time. It does not control any other components. 1. Use the menus to select “SLEEP”. ➡ MENU operation on page 16. 2. Press [TUNE 2 / - or 1 / +] to select the time (in minutes). The display changes as follows: SLEEP OFF ↔ SLEEP 30 ↔ SLEEP 60 ↔ SLEEP 90 ↔ SLEEP 120 To check the setting 1. Press [-MENU] to enter the main menu. 2. Press [TUNE 2 / - or 1 / +] to select “SLEEP”. The time remaining appears. To...
Page 20
![Page 20
20
RQTX0175
Before using a Panasonic DVD recorder or player
DVD recorder
Change the remote control code to match the remote control mode of the DVD recorder.
1. Check the remote control mode of the DVD recorder.
2. For about one second hold down both [OK] and the numbered button ([1], [2] or [3]) (the same as the remote control mode of the DVD recorder).
The factory setting is [1].
DVD player
Change the remote control code so you can operate a DVD player.
For about one second hold down both [OK] and...](http://img.usermanuals.tech/thumb/58/66802/w300_sc-ht56_en_om_d-19.png "Page 20
20
RQTX0175
Before using a Panasonic DVD recorder or player
DVD recorder
Change the remote control code to match the remote control mode of the DVD recorder.
1. Check the remote control mode of the DVD recorder.
2. For about one second hold down both [OK] and the numbered button ([1], [2] or [3]) (the same as the remote control mode of the DVD recorder).
The factory setting is [1].
DVD player
Change the remote control code so you can operate a DVD player.
For about one second hold down both [OK] and...")
20 RQTX0175 Before using a Panasonic DVD recorder or player DVD recorder Change the remote control code to match the remote control mode of the DVD recorder. 1. Check the remote control mode of the DVD recorder. 2. For about one second hold down both [OK] and the numbered button ([1], [2] or [3]) (the same as the remote control mode of the DVD recorder). The factory setting is [1]. DVD player Change the remote control code so you can operate a DVD player. For about one second hold down both [OK] and...