Panasonic Home Photo Printer KX PX10 Operating Manual

							61
Advanced Operations
  To clear the number of copies for all images
You can set the number of copies for all images to 0.
1Press (MENU).
2
Press to select [Select All/Clear] 
and press 
 (OK).
3
Press to select [Clear All] and 
press
 (OK).
4
Press to select [Yes] and press 
 (OK). 
						

							62
Slide Show
The slide show features is used to display images on the memory card one-by-one 
for a specified period of time each.
You can change the display time for each image in the [Slide Show Settings].
Slide Show display
MENUDirection buttons
OK RETURN PRINT
DISPLAY
Same operations are also possible using the remote control. (For the button names on 
the remote control, refer to page 14.)
• Printer
Starting a slide show
You can start a slide show from the first image on the memory card.
1Press (MENU).
2
Press to select [Slide Show] and 
press
 (OK).
Printer 
						

							63
Advanced Operations
3
Press to select [Start Slide 
Show] and press 
 (OK).
•  To print the currently displayed image, press 
 (PRINT).
Button functions during a slide show
Button Function
Previous image/Next image
Pause/Resume
Operation guide On/Off
Stops slide show.
Prints currently displayed image.

” When using the remote control
Press [SLIDE SHOW] button on the remote 
control to start the slide show.
SLIDE SHOW 
						

							64
Slide Show (continued)
Slide show of selected images
To display only a selected images in a slide show, first select the images from the “Summary 
View” display (
 p. 33).
1Press (MENU).
2
Press to select [Slide Show] and 
press
 (OK).
3
Press to select [Selected 
Images] and press 
 (OK).
•  The slide show of the selected images start.
Important
Do not remove the memory card while an image is being displayed. This may damage the 
memory card or render the memory card inoperable.
Note
It may take some time until the image is displayed, depending on the size of the images. The 
displayed time may also be longer than the setting time.
Printer 
						

							65
Advanced Operations
Slide show settings
You can make changes to the various slide show settings in the [Slide Show Settings].
1Press (MENU).
2
Press to select [Slide Show] and 
press
 (OK).
3
Press to select [Slide Show 
Settings] and press 
 (OK).
4
Press to select the item you 
want to change and press 
 (OK).
Continued on next page 
						

							66
Slide Show (continued)
5
Press to select the desired 
option and press 
 (OK).
6
Press to select [OK] and press 
 (OK).
•  If you select [Cancel] and press  (OK) or 
press
 (RETURN), changes will not be 
applied.
Item DescriptionSetting options
(Bold item indicates initial setting)
Interval Specifies the display time for 
an image.3 seconds, 5 seconds, 7 seconds, 
10 seconds
Pattern Specifies the transition 
effect.Normal:
Switches images quickly.
Pattern 1:
Switches images from top to bottom.
Pattern 2:
Switches images from the center toward 
the outside.
Pattern 3:
Switches images with a mosaic effect.
Random:
Randomly switches the Pattern 1 
through 3 and Pattern 4 (where images 
are switched from the outside toward the 
center).
Operation Guide Toggles the display of the 
operation guide shown on 
the slide show screen.ON, OFF
Printer 
						

							67
Advanced Operations
Trimming/Rotating Images
You can reduce/enlarge or rotate an image and print. These settings are available 
on the “Print” screen (
 p. 32).
• Printer
MENU Direction
buttons
OK RETURN PRINT
• Remote  control
ROTATE TRIMMING Direction
buttons
1
Press to select [Zoom/Rotate] 
on the “Print” screen and press 
 (OK).
•  [Zoom/Rotate] is not displayed when multiple 
images have been selected.
2
Reduce, enlarge, rotate and move 
image to match the printout image 
displayed.
Button functions when changing zoom/
rotate
Button Function
Reduces an image.
(Can be reduced up to 20%)
Enlarges an image.
(Can be enlarged up to 500%)
Each time you press this button, 
image rotates 90° clockwise.
Adjusts image position.
Cancels editing.
•  Use the remote control to reduce/enlarge or 
rotate an image. These features cannot be 
controlled on the main unit.
Continued on next page
Printer 
						

							68
3
Press (OK) when finished editing 
the image.
•  A preview is displayed. 
4
Press (PRINT).
Or press 
 to select [Print] and 
press
 (OK).

” To stop print job midway
 Press  (MENU).
 Press  to select [Cancel Printing] and 
press
 (OK).
 Press  to select [Yes] and press 
 (OK).
•  The printing for the paper currently being printed 
will be completed and subsequent printing is 
halted.
Note
•  You cannot save the enlarged/reduced or rotated images. When the image printing has 
finished, changes will be cleared.
•  When enlarging an image, the image quality will deteriorate. The quality of an image 
displayed on a TV screen may differ from that of the actual print.
•  When you have set [Date] and [LUMIX Baby] both to [ON] and edited an image, sometimes 
the date and LUMIX Baby mode information will not be printed depending on the image 
position. (The result of printing will sometimes differ from the preview.)
Trimming/Rotating Images (continued)Printer 
						

							69
Advanced Operations
Creating Calendars
You can create original calendars with your favorite images.
Do not change the paper size during operations. Otherwise, printing will 
become impossible.
• Printer
MENU Direction
buttons
OK RETURN PRINT
• Remote  control
ROTATE TRIMMING Direction
buttons
 Select layout.
1Press (MENU).
2
Press to select [Printing 
Options] and press 
 (OK).
Continued on next page
Printer 
						

							70
3
Press to select [Calendar] 
and press 
 (OK).
4
Press to select the desired 
layout and press 
 (OK).
5
Press to select [Start Year/
Month] and press 
 (OK).
6
Specify the start year and 
month, and press 
 (OK).
Moves between the year 
and month setting items.
Sets the year or month. 
Creating Calendars (continued)Printer