Panasonic Home Network System Keychain Remote Kx Hnk102 Operating Instructions

							Operating Instructions
Home Network System
Keychain Remote
Model No.    KX-HNK102 Thank you for purchasing a Panasonic product.
This document explains how to operate the keychain remote properly.
For details about how to use the system, refer to the User’s Guide
(page 12). Please read this document before using the unit and save it for future
reference.
For assistance, please contact us at 1-800-272-7033 or visit our Web
site: http://shop.panasonic.com/support
 for customers in the U.S.A.Please register your product: http://shop.panasonic.com/support
In order to use this device:
R Download the latest version of the  [Home Network] app.
R Update your hub to the latest firmware version 
(version 5.50 or later).
For more information, refer to the User’s Guide (page 12).
Printed in China
HNK102_(en_en)_0619_ver.031.pdf   12015/06/19   20:30:06    
						

							Important Information
Accessory information 
...............3
About this system ......................4
For your safety ...........................
4
Important safety instructions ......5
For best performance ................5
Other information .......................6
Setup
Part names and functions  ..........8
LED indicator  .............................8
Setup overview  ..........................9
Inserting the battery ................. 10
Attaching the key ring  ..............10
Registering the remote  ............11
Wireless communication
range ....................................... 11
Appendix
Using the remote  .....................12
Features available when using the
[Home Network] app  ................12
Accessing the User’s Guide .... 12
Specifications  .......................... 13
FCC and other information  ......14
Customer services  ...................15
Limited Warranty (ONLY FOR
U.S.A.)  ..................................... 16
2 Table of Contents
HNK102_(en_en)_0619_ver.031.pdf   22015/06/19   20:30:06 
						

							Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
A Battery * 1
1
B Key ring/PNGX1035Z 1*1 When replacing the battery, refer to the battery specifications noted under
“
 Power source” on page 13.
A B
Other information
R
D

esign and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product. Trademarks
R
i

Phone and iPad are registered trademarks of Apple Inc.
R Android is a trademark of Google Inc.
R Microsoft, Windows, and Internet Explorer are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
R All other trademarks identified herein are the property of their respective owners.
For a
ssistance, please visit http://shop.panasonic.com/support 3Important Information
HNK102_(en_en)_0619_ver.031.pdf   32015/06/19   20:30:06   
						

							About this system
R
T
his system is an auxiliary system; it
is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.
R The system’s wireless features are
subject to interference, therefore
functionality in all situations cannot
be guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs in
the event of wireless communication
error or failure. For your safety
T

o prevent severe injury and loss of life/
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product. WARNING
Power connection
R
U

se only the power source marked
on the product.
R Do not connect non-specified
devices. Installation
R
T

o prevent the risk of fire or
electrical shock, do not expose the
product to rain or any type of
moisture.
R Do not place or use this product
near automatically controlled devices such as automatic doors
a

nd fire alarms. Radio waves
emitted from this product may cause
such devices to malfunction
resulting in an accident. Operating safeguards
R
D

o not disassemble the product. Medical
R
C

onsult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. DECT features
operate between 1.92 GHz and
1.93 GHz with a peak transmission
power of 115 mW.
R Do not use the product in health
care facilities if any regulations
posted in the area instruct you not to
do so. Hospitals or health care
facilities may be using equipment
that could be sensitive to external
RF energy. CR Lithium battery
R
D

o not recharge, disassemble,
remodel, heat or throw it into fire.
R Do not touch the terminals   and
 with metal objects.
R R

isk of explosion if battery is
replaced by an incorrect type.
Dispose of used battery according to
local regulations.
R If any electrolyte should come into
contact with your hands or clothes,
wash it off thoroughly with water.
R If any electrolyte should come into
contact with your eyes, never rub
your eyes. Rinse your eyes
4 For a
ssistance, please visit http://shop.panasonic.com/support Important Information
HNK102_(en_en)_0619_ver.031.pdf   42015/06/19   20:30:06    
						

							thoroughly with water, and then
c
onsult a doctor. CAUTION
CR Lithium battery
R
U

se only the battery noted on
page 3.
R Insert the battery correctly.
R Do not leave the battery in an
automobile exposed to direct
sunlight for a long period of time with
the doors and windows closed.
R Remove the battery if you do not
use the product for a long period of
time. Keep it in a cool, dark area.
R Do not replace a battery with wet
hands.
R Keep out of the reach of small
children. There is a risk of
swallowing. If the battery is
swallowed, seek medical attention
immediately.
R Remove the battery if it becomes
unusable. There is a risk of leakage,
overheating, and rupture. Do not
attempt to use a battery if it is
leaking.
R Exercise care when handling the
batteries. Do not allow conductive
materials such as rings, bracelets, or
keys to touch the batteries,
otherwise a short circuit may cause
the batteries and/or the conductive
material to overheat and cause
burns.
Do not intentionally pour water on
the battery or allow it to get wet.
There is a risk of fire and smoke. If
the battery becomes wet, remove it
immediately and contact an
authorized service center. Important safety
i

nstructions
When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock,
and injury to persons, including the
following:
1. Do not use this product near water for example, near a bathtub,
washbowl, kitchen sink, or laundry
tub, in a wet basement or near a
swimming pool.
2. Use only the batteries indicated in this document. Do not dispose of
batteries in a fire. They may
explode. Check with local codes for
possible special disposal
instructions.
SAVE THESE INSTRUCTIONS For b
est performance
Hub location/avoiding noise
T

he hub and other compatible
Panasonic devices use radio waves to
communicate with each other.
R For maximum coverage and
noise-free communications, place
your hub:
– at a convenient, high, and central
location with no obstructions
between the product and hub in
an indoor environment.
– away from electronic appliances such as TVs, radios, personal
computers, wireless devices, or
other phones.
– facing away from radio frequency transmitters, such as external
For a
ssistance, please visit http://shop.panasonic.com/support 5Important Information
HNK102_(en_en)_0619_ver.031.pdf   52015/06/19   20:30:06  
						

							antennas of mobile phone cell
s
tations. (Avoid putting the hub
on a bay window or near a
window.)
R If the reception for a hub location is
not satisfactory, move the hub to
another location for better reception. Environment
R
K

eep the product away from
electrical noise generating devices,
such as fluorescent lamps and
motors.
R The product should be kept free
from excessive smoke, dust, high
temperature, and vibration.
R The product should not be exposed
to direct sunlight.
R Do not place heavy objects on top of
the product.
R The product should be kept away
from heat sources such as heaters,
kitchen stoves, etc. It should not be
placed in rooms where the
temperature is less than 0 °C (32 °F)
or greater than 40 °C (104 °F).
R Operating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances. Other information
C

AUTION:  Risk of explosion if battery
is replaced by an incorrect type.
Dispose of used batteries according to
the instructions. Routine care
R
W

ipe the outer surface of the
product with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder. Information on Disposal in other
C

ountries outside the European
Union These symbols are only valid in the
E

uropean Union. If you wish to discard
these items, please contact your local
authorities or dealer and ask for the
correct method of disposal. Note for the battery removal
p

rocedure
Refer to “Inserting the battery” on
page 10.
6 For a
ssistance, please visit http://shop.panasonic.com/support Important Information
HNK102_(en_en)_0619_ver.031.pdf   62015/06/19   20:30:06  
						

							Notice
For assistance, please visit http://shop.panasonic.com/support
7Important Information
HNK102_(en_en)_0619_ver.031.pdf   72015/06/19   20:30:06  
						

							Part names and
f
unctions
n  Front view n
 
Rear view LED indicator
 (Arm: Away) button
A

rms the alarm system using the
[Arm: Away]  mode.  (disarm) button
D

isarms the alarm system.  (smart) button
U

sed to turn on a smart plug,
trigger the alarm system, etc. Battery cover lock
Battery cover
M N
U

sed to register the keychain
remote to the hub. Key ring eyelet
Key ring
LED indicator
Y

ou can use the LED indicator to
confirm the remote’s status. Indicator Status
Off Normal operation or
n

o power *1
Amber,
b
 linking
quickly Signal is being sent
t
o the hub (you are
pressing a button) *2
Red, lit [Arm: Away] 
 mode
selected (you
pressed the arm
button) *2
Green, lit [Disarm] 
mode
selected (you
pressed the disarm
button), or you
pressed the smart
button*2 8
For a
ssistance, please visit http://shop.panasonic.com/support Setup
HNK102_(en_en)_0619_ver.031.pdf   82015/06/19   20:30:06A B C D E F H
I
G               
						

							Indicator Status
Red, blinking Remote is out of range of the hub, or
could not
communicate with
the hub
Green,
b
 linking slowly Registration mode
( you pressed and
held  M N
)
Repeating
p
 attern of
blinking green
and blinking
red Low battery*1 The LED lights for about 2
s
 econds after a button is pressed,
then turns off. If the LED indicator
does not light when you press a
button, the battery must be
replaced.
*2 The LED indicator does not indicate remote’s status if the
remote has not been registered
(page 11). Setup overview
1
I

nitial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2 Insert the battery
The remote is battery powered.
3 Registration
Required only if the remote was
purchased separately (i.e., not as
part of a bundle). 4
C
onfirm the usage area
Read the information in this
document to confirm that the
desired usage area is suitable to
proper operation.
For a
ssistance, please visit http://shop.panasonic.com/support 9 Setup
HNK102_(en_en)_0619_ver.031.pdf   92015/06/19   20:30:06  
						

							Inserting the battery
R
U
SE ONLY a CR2 Lithium battery.
R Confirm the polarities ( ,  ).
R U

sing a metal object to open the
lock may scratch the lock.
1 Remove the battery cover.
RInsert a thin, flat object into the
battery cover lock and rotate it
to the “unlocked” position, as
shown below. Locked Unlocked
R G
rasp the indented areas on
the sides of the battery cover
(A ) and lift the cover up ( B). 2
I
nsert the battery. 3
A
ttach and lock the battery cover.
RAfter attaching the battery
cover, rotate the lock to the
“locked” position. Attaching the key
r

ing
Attach the key ring to the remote as
shown. 10
For a
ssistance, please visit http://shop.panasonic.com/support Setup
HNK102_(en_en)_0619_ver.031.pdf   102015/06/19   20:30:06    1
1
2