Panasonic Home Network System Keychain Remote Kx Hnk102 Operating Instructions

Operating Instructions
Home Network System
Keychain Remote
Model No.    KX-HNK102 Thank you for purchasing a Panasonic product.
This document explains how to operate the keychain remote properly.
For details about how to use the system, refer to the User’s Guide
(page 12). Please read this document before using the unit and save it for future
reference.
For assistance, please contact us at 1-800-272-7033 or visit our Web
site: http://shop.panasonic.com/support
 for customers in the U.S.A.Please register...

Important Information
Accessory information 
...............3
About this system ......................4
For your safety ...........................
4
Important safety instructions ......5
For best performance ................5
Other information .......................6
Setup
Part names and functions  ..........8
LED indicator  .............................8
Setup overview  ..........................9
Inserting the battery ................. 10
Attaching the key ring  ..............10
Registering the...

Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
A Battery * 1
1
B Key ring/PNGX1035Z 1*1 When replacing the battery, refer to the battery specifications noted under
“
 Power source” on page 13.
A B
Other information
R
D

esign and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product. Trademarks
R
i

Phone and iPad are registered trademarks of Apple Inc.
R Android is a trademark of Google...

About this system
R
T
his system is an auxiliary system; it
is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.
R The system’s wireless features are
subject to interference, therefore
functionality in all situations cannot
be guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs in
the event of wireless communication
error or failure....

thoroughly with water, and then
c
onsult a doctor. CAUTION
CR Lithium battery
R
U

se only the battery noted on
page 3.
R Insert the battery correctly.
R Do not leave the battery in an
automobile exposed to direct
sunlight for a long period of time with
the doors and windows closed.
R Remove the battery if you do not
use the product for a long period of
time. Keep it in a cool, dark area.
R Do not replace a battery with wet
hands.
R Keep out of the reach of small
children. There is a risk of
swallowing....

antennas of mobile phone cell
s
tations. (Avoid putting the hub
on a bay window or near a
window.)
R If the reception for a hub location is
not satisfactory, move the hub to
another location for better reception. Environment
R
K

eep the product away from
electrical noise generating devices,
such as fluorescent lamps and
motors.
R The product should be kept free
from excessive smoke, dust, high
temperature, and vibration.
R The product should not be exposed
to direct sunlight.
R Do not place heavy...

Notice
For assistance, please visit http://shop.panasonic.com/support
7Important Information
HNK102_(en_en)_0619_ver.031.pdf   72015/06/19   20:30:06  

Part names and
f
unctions
n  Front view n
 
Rear view LED indicator
 (Arm: Away) button
A

rms the alarm system using the
[Arm: Away]  mode.  (disarm) button
D

isarms the alarm system.  (smart) button
U

sed to turn on a smart plug,
trigger the alarm system, etc. Battery cover lock
Battery cover
M N
U

sed to register the keychain
remote to the hub. Key ring eyelet
Key ring
LED indicator
Y

ou can use the LED indicator to
confirm the remote’s status. Indicator Status
Off Normal operation or
n

o power...

Indicator Status
Red, blinking Remote is out of range of the hub, or
could not
communicate with
the hub
Green,
b
 linking slowly Registration mode
( you pressed and
held  M N
)
Repeating
p
 attern of
blinking green
and blinking
red Low battery*1 The LED lights for about 2
s
 econds after a button is pressed,
then turns off. If the LED indicator
does not light when you press a
button, the battery must be
replaced.
*2 The LED indicator does not indicate remote’s status if the
remote has not been...

Inserting the battery
R
U
SE ONLY a CR2 Lithium battery.
R Confirm the polarities ( ,  ).
R U

sing a metal object to open the
lock may scratch the lock.
1 Remove the battery cover.
RInsert a thin, flat object into the
battery cover lock and rotate it
to the “unlocked” position, as
shown below. Locked Unlocked
R G
rasp the indented areas on
the sides of the battery cover
(A ) and lift the cover up ( B). 2
I
nsert the battery. 3
A
ttach and lock the battery cover.
RAfter attaching the battery
cover,...