Panasonic Home Network System Glass Break Sensor Kx Hns104 Installation Guide

							Installation Guide
Home Network System
Glass Break Sensor
Model No.    KX-HNS104 Thank you for purchasing a Panasonic product.
This document explains how to install the glass break sensor properly.
For details about how to use the system, refer to the User’s Guide
(page 17). Please read this document before using the unit and save it for future
reference.
For assistance, please contact us at 1-800-272-7033 or visit our Web
site: http://shop.panasonic.com/support
 for customers in the U.S.A.Please register your product: http://shop.panasonic.com/support
In order to use this device:
R Download the latest version of the  [Home Network] app.
R Update your hub to the latest firmware version 
(version 5.55 or later).
For more information, refer to the User’s Guide (page 17).
Printed in China
HNS104_(en_en)_1102_ver.310.pdf   12015/11/02   14:58:48    
						

							Introduction
Accessory information 
...............3
Warnings and Product
Limitations/Important
Information
Disclaimer  ..................................4
About this system ......................4
For your safety ...........................
4
Important safety instructions ......5
For best performance ................5
Other information .......................6
Setup
Part names and functions  ..........8
LED indicator  .............................8
Setup overview  ..........................8
Inserting the batteries  ................9
Registering the sensor .............10
Confirming the usage area  ......11
Information about sensor
features ....................................12
Wall mounting  .......................... 14
Appendix
Adjusting the sensor
sensitivity ................................. 17
Features available when using the
[Home Network] app  ................17
Accessing the User’s Guide .... 17
Specifications  .......................... 18
FCC and other information  ......19
Customer services  ...................20
Limited Warranty (ONLY FOR
U.S.A.)  ..................................... 21
2 Table of Contents
HNS104_(en_en)_1102_ver.310.pdf   22015/11/02   14:58:48 
						

							Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
A Batteries * 1
2
B Wall mounting adaptor *
 2
/PNKK1111Z1 1
C Wall mounting screws (25 mm (1 inch))/XTB4+25AVW 2*1 When replacing batteries, see “Power source” of “Specifications”, page 18
f
 or battery information.
*2 The sensor can be wall mounted with or without the wall mounting adaptor (page 14).
A B C
Other information
R
D

esign and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product. Trademarks
R
i

Phone and iPad are registered trademarks of Apple Inc.
R Android is a trademark of Google Inc.
R Microsoft, Windows, and Internet Explorer are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
R All other trademarks identified herein are the property of their respective owners.
For a
ssistance, please visit http://shop.panasonic.com/support 3Introduction
HNS104_(en_en)_1102_ver.310.pdf   32015/11/02   14:58:48      
						

							Disclaimer
W
hen properly installed and
maintained, this product is designed to
help provide an added layer of notice in
the case of broken glass. Panasonic
Corporation of North America makes
no representations or warranties that it
will at all times, or under all
circumstances, or in any given
circumstance, detect broken glass, or
work with all types of glass, or that it
will prevent loss of or damage to
property or persons. Panasonic
Corporation of North America shall
have no liability for any personal injury,
or damage to property or other loss, of
any kind, should the product fail to
warn or notify. About this system
R
T

his system is an auxiliary system; it
is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.
R The system’s wireless features are
subject to interference, therefore
functionality in all situations cannot
be guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs in
the event of wireless communication
error or failure. For your safety
T

o prevent severe injury and loss of life/
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.  WARNING
Power connection
R
U

se only the power source marked
on the product.
R Do not connect non-specified
devices. Installation
R
T

o prevent the risk of fire or
electrical shock, do not expose the
product to rain or any type of
moisture.
R Do not place or use this product
near automatically controlled
devices such as automatic doors
and fire alarms. Radio waves
emitted from this product may cause
such devices to malfunction
resulting in an accident.
R Install the product only on a vertical
surface. Do not install the product on
a ceiling, as the product may fall,
resulting in damage or injury.
R Keep small parts (screws, etc.) out
of the reach of children. There is a
risk of swallowing. In the event they
are swallowed, seek medical advice
immediately. Operating safeguards
R
D

o not disassemble the product.
4 For a
ssistance, please visit http://shop.panasonic.com/support Warnings and Product Limitations/Important Information
HNS104_(en_en)_1102_ver.310.pdf   42015/11/02   14:58:48  
						

							Medical
R
C
onsult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. DECT features
operate between 1.92 GHz and
1.93 GHz with a peak transmission
power of 115 mW.
R Do not use the product in health
care facilities if any regulations
posted in the area instruct you not to
do so. Hospitals or health care
facilities may be using equipment
that could be sensitive to external
RF energy.  CAUTION
Battery
R
T

he batteries should be used
correctly, otherwise the product may
be damaged due to battery leakage.
R Do not charge, short-circuit,
disassemble, or heat the batteries.
R Do not dispose of batteries in a fire.
R Remove all the batteries when
replacing.
R Do not mix old, new or different
types of batteries.
R It is recommended that batteries are
replaced annually.
R Keep out of the reach of small
children. There is a risk of
swallowing. If the battery is
swallowed, seek medical attention
immediately.
R Remove the battery if it becomes
unusable. There is a risk of leakage,
overheating, and rupture. Do not
attempt to use a battery if it is
leaking. R
D
o not intentionally pour water on
the battery or allow it to get wet.
There is a risk of fire and smoke. If
the battery becomes wet, remove it
immediately and contact an
authorized service center. Important safety
i

nstructions
When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock,
and injury to persons, including the
following:
1. Do not use this product near water for example, near a bathtub,
washbowl, kitchen sink, or laundry
tub, in a wet basement or near a
swimming pool.
2. Use only the batteries indicated in this document. Do not dispose of
batteries in a fire. They may
explode. Check with local codes for
possible special disposal
instructions.
SAVE THESE INSTRUCTIONS For b
est performance
Hub location/avoiding noise
T

he hub and other compatible
Panasonic devices use radio waves to
communicate with each other.
R For maximum coverage and
noise-free communications, place
your hub:
– at a convenient, high, and central
location with no obstructions
For a
ssistance, please visit http://shop.panasonic.com/support 5Warnings and Product Limitations/Important Information
HNS104_(en_en)_1102_ver.310.pdf   52015/11/02   14:58:48  
						

							between the product and hub in
a
n indoor environment.
– away from electronic appliances such as TVs, radios, personal
computers, wireless devices, or
other phones.
– facing away from radio frequency transmitters, such as external
antennas of mobile phone cell
stations. (Avoid putting the hub
on a bay window or near a
window.)
R If the reception for a hub location is
not satisfactory, move the hub to
another location for better reception. Environment
R
K

eep the product away from
electrical noise generating devices,
such as fluorescent lamps and
motors.
R The product should be kept free
from excessive smoke, dust, high
temperature, and vibration.
R The product should not be exposed
to direct sunlight.
R Do not place heavy objects on top of
the product.
R The product should be kept away
from heat sources such as heaters,
kitchen stoves, etc. It should not be
placed in rooms where the
temperature is less than 0 °C (32 °F)
or greater than 40 °C (104 °F).
Damp basements should also be
avoided.
R Operating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances.
R The sensor may make false
detections in noisy locations, such
as where there is noise from metallic
blinds opening and closing, or
metallic bells of alarm clocks. Avoid installing the sensor in these
l

ocations.
R The sounds of doors opening and
closing may cause false detections.
Do not install the sensor near doors.
R Do not place screens or shielding
(such as sound blocking curtains)
between the glass and sensor. This
may prevent the sensor from being
able to detect the sound of glass
breaking.
R The product may not be able to
detect the sound of glass breaking
depending on the noise conditions of
the surrounding area.
R To avoid false detections, do not
install the product in areas where
loud noises occur or near devices
that produce loud noise.
R Refer to “Sensor detection range” on
page 13 and install the product
within the wireless communication
range of the hub. Other information
C

AUTION:  Risk of explosion if battery
is replaced by an incorrect type.
Dispose of used batteries according to
the instructions. Routine care
R
W

ipe the outer surface of the
product with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
6 For a
ssistance, please visit http://shop.panasonic.com/support Warnings and Product Limitations/Important Information
HNS104_(en_en)_1102_ver.310.pdf   62015/11/02   14:58:48 
						

							Information on Disposal in other
C
ountries outside the European
Union These symbols are only valid in the
E

uropean Union. If you wish to discard
these items, please contact your local
authorities or dealer and ask for the
correct method of disposal. Note for the battery removal
p

rocedure
Refer to “Inserting the batteries” on
page 9. Notice
For a
ssistance, please visit http://shop.panasonic.com/support
7Warnings and Product Limitations/Important Information
HNS104_(en_en)_1102_ver.310.pdf   72015/11/02   14:58:48   
						

							Part names and
f
unctions Microphone
LED indicator
M
H
IGH N/M LOW N
Used to change the sensor
sensitivity (page 17). Rear cover
M N
U

sed to confirm the status of the
sensor or register the sensor to
the hub. LED indicator
Y

ou can press  M N
 
and check the
LED indicator to confirm the sensor’s
status. After confirming the sensor’s
status, we recommend turning the LED
indicator off by pressing  M N
 
again
as soon as possible, otherwise battery
life may be reduced. Indicator Status
Green, lit No glass break d
etected
Red, lit Glass break was d
etected
Red,
b
 linking Sensor is out of range
o
f the hub
Green,
b
 linking
slowly Registration mode
( You pressed and held
M N
)
Off No battery power Note:
R
T

he LED indicator does not indicate
sensor status if the sensor has not
been registered (page 10). Setup overview
1
I

nitial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2 Insert the batteries
The sensor is battery powered.
3 Registration
Required only if the sensor was
purchased separately (i.e., not as
part of a bundle).
4 Confirm the installation area
Read the information in this
document to confirm that the
desired installation area is suitable
to proper operation.
5 Installation
Install the sensor in the desired
location.
8 For a
ssistance, please visit http://shop.panasonic.com/support Setup
HNS104_(en_en)_1102_ver.310.pdf   82015/11/02   14:58:48AB CD
E           
						

							Inserting the
b
atteries
R USE ONLY Alkaline batteries AA
(LR6) size.
R Do NOT use Manganese/Ni-Cd/
Ni-MH batteries.
R Confirm the polarities ( ,  ).
1 R

emove the rear cover by
pressing the upper sides of the
cover ( A) and sliding it down ( B). 2
I
nsert the batteries. 3
I
nstall the rear cover.
RPlace it with the “ ” mark
f
acing upwards and slide it. Note:
R
I

f the sensor’s battery power is low,
a message will be displayed on the
[Sensor]  screen of the  [Home
Network]  app. We recommend you
check this screen periodically to
ensure that the battery does not
become fully discharged. For more
information, refer to the User’s
Guide (page 17).
For a
ssistance, please visit http://shop.panasonic.com/support 9 Setup
HNS104_(en_en)_1102_ver.310.pdf   92015/11/02   14:58:48  AB     
						

							Registering the
s
ensor
This procedure is not required for
d
 evices that were included as part of
a bundle. Before you can use the sensor, it must
b

e registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
You can register each device by using
the registration buttons or the  [Home
Network]  app.
Note:
R For information about deregistering
devices, refer to the User’s Guide
(page 17). Using registration buttons
1
H

ub:
Press and hold  M  OTHER
D

EVICE N until the LED indicator
blinks slowly in green.
2 Sensor:
Press and hold  M N
 
until the
LED indicator blinks slowly in
green (page 8).
R When registration is complete,
the hub sounds one long beep.
Note:
R To cancel without registering the
sensor, press  M N
 
on the hub and
on the sensor again.
R If registration fails, the hub sounds
several short beeps. Using the app
W

hen you register the sensor by using
the  [Home Network]  app, you can
assign a name to your devices and
group them by location. For more
information, refer to the User’s Guide
(page 17).
10 For a
ssistance, please visit http://shop.panasonic.com/support Setup
HNS104_(en_en)_1102_ver.310.pdf   102015/11/02   14:58:48