Home
>
Panasonic
>
Wireless Network
>
Panasonic Home Network System Digital Cordless Handset Kx Hnh100 Operating Instructions
Panasonic Home Network System Digital Cordless Handset Kx Hnh100 Operating Instructions
Here you can view all the pages of manual Panasonic Home Network System Digital Cordless Handset Kx Hnh100 Operating Instructions . The Panasonic manuals for Wireless Network are available online for free. You can easily download all the documents as PDF.
Page 41
Character table T he dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned to it. *1 The following characters are assigned to the 1 key when entering a Wi-Fi password.Note: R W hile entering characters, you can switch between uppercase and lowercase by pressing * (A ®a). R To enter another character that is located on the same dial key, first press ME N to move the cursor to the next space. R If you do not press any dial key within 2 seconds after...
Page 42
Display message Cause/solution Cannot obtain IP a ddress R Your wireless router does not support DHCP, or the DHCP feature of your wireless router is turned off. If your wireless router supports DHCP, make sure that its DHCP feature is turned on. If DHCP is not available, set the hub’s IP settings manually. See “Advanced configuration (static IP settings)”, page 29. Error!! RR ecording was too short. Try again. Failed to connect RY ou entered the wrong password when configuring the hub to connect to your...
Page 43
Problem Cause/solution The unit does not work. RMake sure the batteries are installed correctly (page 9). RFully charge the batteries (page 9). R Check the connections (page 9). R Unplug the hub’s AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the hub. Register the handset (page 12). I cannot hear a dial tone. RT he hub’s AC adaptor or telephone line cord is not connected. Check the connections. R Disconnect the hub from the telephone line and...
Page 44
Making/answering calls, intercom Problem Cause/solution is displayed. R The handset is too far from the hub. Move closer. RThe hub’s AC adaptor is not properly connected. Reconnect AC adaptor to the hub. R The handset is not registered to the hub. Register it (page 12). Noise is heard, sound cuts in a nd out. R You are using the handset or hub in an area with high electrical interference. Re-position the hub and use the handset away from sources of interference. R Move closer to the hub. R If you use a...
Page 45
Problem Cause/solution Caller information is not a nnounced. R The handset ringer volume is turned off. Adjust it (page 13, 24). R The Talking Caller ID feature is turned off. Turn it on (page 24). R The number of rings for the answering system is set to “2 rings ” or “Toll saver ”. Select a different setting (page 36). R If the hub and another handset are having an intercom call, your handset does not announce caller information. The caller list/incoming phone n umbers are not edited automatically....
Page 46
Problem Cause/solution I cannot operate the answering s ystem remotely. R The remote access code is not set. Set the remote access code (page 34). R You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code (page 34). R The answering system is turned off. Turn it on (page 35). The answering system must be activated (page 31) in order to turn it on remotely. The unit does not emit the s pecified number of...
Page 47
Network connection Problem Cause/solution I am having trouble c onnecting. R Your wireless router is not turned or is not functioning. Refer to the operating instructions included with your wireless router. R Your mobile device is not connected to your wireless router. Check your mobile device’s Wi-Fi settings. Refer to the operating instructions included with your mobile device. R The SSID (wireless network name), security type, or password assigned to the wireless router has been changed. Configure the...
Page 48
Guía Rápida Española 48 Para obtener ayuda, visite www.panasonic.com/support (solo en inglés) Guía Rápida EspañolaHNH100_(en_en)_0814_ver.050.pdf 482014/08/14 11:37:21Conexiones Insta lac ión y ca rga de la b ater ía Car gue apro xima dame nte durant e 7 ho ras. Nota:LUTILI CE SO LO bater ías recargab les de Ni -MH tama ño AAA (R03) ( ).LNO utilice baterías Alcalinas, de Manganeso o de Ni-Cd.LConfirme que l as p olaridades es tén correc tas (S, T).LCambie el idioma de la pantalla.LConf irme que ap...
Page 49
Para obtener ayuda, visite www.panasonic.com/support (solo en inglés) 49Guía Rápida Española HNH100_(en_en)_0814_ver.050.pdf 492014/08/14 11:37:21Cambio de idioma s (Auric ular) (pre determinado: “English”) Idioma de la p ant alla{MEN U}(11) s {r}: “Español” s {GUARDA} s {OFF} Idioma de la gu ía de voz{MEN U}(112 s {r}: “Español” s {GUARDA} s {OFF} Ope raci ones básica s Cómo hacer y c onte star llama das (Auricula r) Para hacer llamada sMarque e l n úmero t elef ónic o. s {C}/{s} Para...
Page 50
50 Para obtener ayuda, visite www.panasonic.com/support (solo en inglés) Guía Rápida EspañolaHNH100_(en_en)_0814_ver.050.pdf 502014/08/14 11:37:21Integ rac ión de l Sistema de red d oméstico Func iones de segur idad (Auricular) Activación del sistema1{}2{r}: Seleccione “En casa” o “Fuera”.s {SELEC.}3Introduzca la clave si es necesario. s {OK} LCua ndo sel ecciona el modo “Fuera”, necesita oprimir {OK} para a cti varlo . Desactivació n del sistema1{DISARM}2{r}: “Desarmar” s {SELEC .}3Introduzca la...