Home
>
Panasonic
>
Car Satellite Radio System
>
Panasonic High Power Receiver Cr W400u Operating Instructions
Panasonic High Power Receiver Cr W400u Operating Instructions
Here you can view all the pages of manual Panasonic High Power Receiver Cr W400u Operating Instructions . The Panasonic manuals for Car Satellite Radio System are available online for free. You can easily download all the documents as PDF.
Page 1
High Power Receiver CR-W400U Operating Instructions Please read these instructions carefully before using this product and save this manual for future use.
Page 2
Page 3
2 Panasonicwelcomes you to our ever growing family of electronic product owners. We know that this product will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineering, manufactured with carefully selected components and assembled by people who take pride in their work. Once you discover the quality, reliability, and value we have built into this product, you too will be proud to be a member of our family. ❏Use This Equipment Safely When Driving Keep...
Page 4
3 Contents Use This Equipment Safely ...................................................................Page 2 ❏Power and Sound Controls ......................................................................4 How to adjust the volume, mute, balance, and tone for best listening ❏Radio Basics..............................................................................................6 Mode selection, manual and automatic tuning, band selection, preset stations ❏Clock Basics...
Page 5
![Page 5
4
Power and Sound Controls
Power
If the vehicle is not running yet, turn the key in the ignition until the
accessory indicator lights.
Press
[PWR]to switch on the power.
Changing Audio Modes
Press this knob [SEL]to change the audio mode as follows.
VOLaBASSaTRE
(Volume) (Treble)
cdFADEbBAL
(Fader) (Balance)
Volume
µPress the knob to select the volume mode and then turn it
clockwise or counterclockwise to adjust the volume level.
Bass and Treble
Press the knob to select the BASS or TREBLE mode and then...](http://img.usermanuals.tech/thumb/58/65429/w300_cr-w400u_en_om_d-4.png "Page 5
4
Power and Sound Controls
Power
If the vehicle is not running yet, turn the key in the ignition until the
accessory indicator lights.
Press
[PWR]to switch on the power.
Changing Audio Modes
Press this knob [SEL]to change the audio mode as follows.
VOLaBASSaTRE
(Volume) (Treble)
cdFADEbBAL
(Fader) (Balance)
Volume
µPress the knob to select the volume mode and then turn it
clockwise or counterclockwise to adjust the volume level.
Bass and Treble
Press the knob to select the BASS or TREBLE mode and then...")
4 Power and Sound Controls Power If the vehicle is not running yet, turn the key in the ignition until the accessory indicator lights. Press [PWR]to switch on the power. Changing Audio Modes Press this knob [SEL]to change the audio mode as follows. VOLaBASSaTRE (Volume) (Treble) cdFADEbBAL (Fader) (Balance) Volume µPress the knob to select the volume mode and then turn it clockwise or counterclockwise to adjust the volume level. Bass and Treble Press the knob to select the BASS or TREBLE mode and then...
Page 6
![Page 6
5
Fader
Press the knob to select the FADER mode and then turn it
clockwise or counterclockwise to shift the sound volume to the front
or rear speakers.
Mute
µPress [MUTE]to mute the sound completely.
µPress [MUTE]again to cancel.
Note: In the audio mode (BASS/TRE/BAL/FADE), the display
will return to regular operation mode when there is no input for
more than 5 seconds (2 seconds in the VOL mode).
or R 1 to 15Fader Center
Balance
Press the knob to select the BALANCE mode and then turn it
clockwise or...](http://img.usermanuals.tech/thumb/58/65429/w300_cr-w400u_en_om_d-5.png "Page 6
5
Fader
Press the knob to select the FADER mode and then turn it
clockwise or counterclockwise to shift the sound volume to the front
or rear speakers.
Mute
µPress [MUTE]to mute the sound completely.
µPress [MUTE]again to cancel.
Note: In the audio mode (BASS/TRE/BAL/FADE), the display
will return to regular operation mode when there is no input for
more than 5 seconds (2 seconds in the VOL mode).
or R 1 to 15Fader Center
Balance
Press the knob to select the BALANCE mode and then turn it
clockwise or...")
5 Fader Press the knob to select the FADER mode and then turn it clockwise or counterclockwise to shift the sound volume to the front or rear speakers. Mute µPress [MUTE]to mute the sound completely. µPress [MUTE]again to cancel. Note: In the audio mode (BASS/TRE/BAL/FADE), the display will return to regular operation mode when there is no input for more than 5 seconds (2 seconds in the VOL mode). or R 1 to 15Fader Center Balance Press the knob to select the BALANCE mode and then turn it clockwise or...
Page 7
![Page 7
6
Radio Basics
Selecting a Band
Press [BAND]to change the band setting as follows.
FM1
aFM2aW/BaAM
(Weather Band)
cd
ST indicator lights when FM stereo breadcast is available.
Manual Tuning
Press [TUNE j j]or [TUNE i i]to tune in a higher or lower
frequency.
Seek Tuning
Press and hold [SEEK j j]or [SEEK i i]for more than 0.5
seconds, then release it.
Seek tuning will automatically stop when a signal of the next
broadcast station is received.
CRW400U
CRW400U
CRW400U
CRW400U
Hold and release](http://img.usermanuals.tech/thumb/58/65429/w300_cr-w400u_en_om_d-6.png "Page 7
6
Radio Basics
Selecting a Band
Press [BAND]to change the band setting as follows.
FM1
aFM2aW/BaAM
(Weather Band)
cd
ST indicator lights when FM stereo breadcast is available.
Manual Tuning
Press [TUNE j j]or [TUNE i i]to tune in a higher or lower
frequency.
Seek Tuning
Press and hold [SEEK j j]or [SEEK i i]for more than 0.5
seconds, then release it.
Seek tuning will automatically stop when a signal of the next
broadcast station is received.
CRW400U
CRW400U
CRW400U
CRW400U
Hold and release")
6 Radio Basics Selecting a Band Press [BAND]to change the band setting as follows. FM1 aFM2aW/BaAM (Weather Band) cd ST indicator lights when FM stereo breadcast is available. Manual Tuning Press [TUNE j j]or [TUNE i i]to tune in a higher or lower frequency. Seek Tuning Press and hold [SEEK j j]or [SEEK i i]for more than 0.5 seconds, then release it. Seek tuning will automatically stop when a signal of the next broadcast station is received. CRW400U CRW400U CRW400U CRW400U Hold and release
Page 8
![Page 8
7
Tuning in a Preset Station
Press the corresponding preset buttons [1]to [6]to tune in a preset
station.
Auto Station Preset
Select a band and press and hold [SCAN](AUTO PRESETS) for
more than 2 seconds.
µThe 6 strongest available stations will be automatically saved in
the memory on preset buttons
[1]to [6].µOnce set, the preset stations are sequentially scanned for 5
seconds each.
Notes:µIn Auto Station Preset mode, only FM2 is available for FM
stations. (FM1 is not available.)
µAuto Station Preset...](http://img.usermanuals.tech/thumb/58/65429/w300_cr-w400u_en_om_d-7.png "Page 8
7
Tuning in a Preset Station
Press the corresponding preset buttons [1]to [6]to tune in a preset
station.
Auto Station Preset
Select a band and press and hold [SCAN](AUTO PRESETS) for
more than 2 seconds.
µThe 6 strongest available stations will be automatically saved in
the memory on preset buttons
[1]to [6].µOnce set, the preset stations are sequentially scanned for 5
seconds each.
Notes:µIn Auto Station Preset mode, only FM2 is available for FM
stations. (FM1 is not available.)
µAuto Station Preset...")
7 Tuning in a Preset Station Press the corresponding preset buttons [1]to [6]to tune in a preset station. Auto Station Preset Select a band and press and hold [SCAN](AUTO PRESETS) for more than 2 seconds. µThe 6 strongest available stations will be automatically saved in the memory on preset buttons [1]to [6].µOnce set, the preset stations are sequentially scanned for 5 seconds each. Notes:µIn Auto Station Preset mode, only FM2 is available for FM stations. (FM1 is not available.) µAuto Station Preset...
Page 9
![Page 9
8
Tuning in a Weather Band
Station
Press any of the buttons [1]to [6]to monitor the preset station.
Weather Band Stations
National Weather Radio Broadcasts from over 380 locations
throughout the U.S. on seven VHF/FM frequencies.
Tune to weather band to receive continuous weather information 24
hours a day on one of the following frequencies.
1. 162.550 MHz
2. 162.400 MHz
3. 162.475 MHz
4. 162.425 MHz
5. 162.450 MHz
6. 162.500 MHz
7. 162.525 MHz
Occasionally the frequency of an existing or planned station...](http://img.usermanuals.tech/thumb/58/65429/w300_cr-w400u_en_om_d-8.png "Page 9
8
Tuning in a Weather Band
Station
Press any of the buttons [1]to [6]to monitor the preset station.
Weather Band Stations
National Weather Radio Broadcasts from over 380 locations
throughout the U.S. on seven VHF/FM frequencies.
Tune to weather band to receive continuous weather information 24
hours a day on one of the following frequencies.
1. 162.550 MHz
2. 162.400 MHz
3. 162.475 MHz
4. 162.425 MHz
5. 162.450 MHz
6. 162.500 MHz
7. 162.525 MHz
Occasionally the frequency of an existing or planned station...")
8 Tuning in a Weather Band Station Press any of the buttons [1]to [6]to monitor the preset station. Weather Band Stations National Weather Radio Broadcasts from over 380 locations throughout the U.S. on seven VHF/FM frequencies. Tune to weather band to receive continuous weather information 24 hours a day on one of the following frequencies. 1. 162.550 MHz 2. 162.400 MHz 3. 162.475 MHz 4. 162.425 MHz 5. 162.450 MHz 6. 162.500 MHz 7. 162.525 MHz Occasionally the frequency of an existing or planned station...
Page 10
![Page 10
CRW400UCRW400U
CRW400U
9
Clock Basics (The clock system is 12-hours.)
Initial Time
Press and hold [CLK]to set time. Display blinks, and the time
setting mode is activated.
Press
[i i]to set the hour.
Press
[j j]to set the minute.
(Hold
[i i]or [j j]to change numbers rapidly.)
Once the time has been set, release [CLK].
Note:When the clock is not set yet, SET is displayed.
Time Reset
When you want to reset the time, repeat steps and above.
Clock Display
Press [CLK]to display the current time.
Press...](http://img.usermanuals.tech/thumb/58/65429/w300_cr-w400u_en_om_d-9.png "Page 10
CRW400UCRW400U
CRW400U
9
Clock Basics (The clock system is 12-hours.)
Initial Time
Press and hold [CLK]to set time. Display blinks, and the time
setting mode is activated.
Press
[i i]to set the hour.
Press
[j j]to set the minute.
(Hold
[i i]or [j j]to change numbers rapidly.)
Once the time has been set, release [CLK].
Note:When the clock is not set yet, SET is displayed.
Time Reset
When you want to reset the time, repeat steps and above.
Clock Display
Press [CLK]to display the current time.
Press...")
CRW400UCRW400U CRW400U 9 Clock Basics (The clock system is 12-hours.) Initial Time Press and hold [CLK]to set time. Display blinks, and the time setting mode is activated. Press [i i]to set the hour. Press [j j]to set the minute. (Hold [i i]or [j j]to change numbers rapidly.) Once the time has been set, release [CLK]. Note:When the clock is not set yet, SET is displayed. Time Reset When you want to reset the time, repeat steps and above. Clock Display Press [CLK]to display the current time. Press...