Panasonic High Definition Plasma Display Th 37ph10 Operating Instructions

							41
Item Effect Adjustments
Off-timer 
function
EnableDisable
Enable:  Enables the “Off-timer function”.
Disable:  Disables the “Off-timer function”.
Note:    When “Disable” is set, the Off-timer is cancelled.
Initial Power 
ModeNormal  Standby  On
Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.Normal:  Power returns in as the same state as before the power interruption.
Standby:  Power returns in standby mode. (Power Indicator : red/orange)
On:    Power returns in power On. (Power Indicator : green)
Note:  
When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.
ID selectSets panel ID number when panel is used in “Remote ID” or “Serial ID”.
Set value range: 0 - 100
(Standard value: 0)
Remote ID
Off On
Off:  Disables ID remote control functions. You can use normal remote control operations.
On:  Enable ID remote control functions.
Serial ID
Off On
Sets the panel ID Control.
Off:  Disables external control by the ID.
On:  Enables the external control by the ID.
Display size
Off On
Adjusts the image display size on screen.
Off:  Sets the normal image display size on screen.
On:  Sets the image display size approximately 95 % of the normal image display.
    Off       On
  
Notes:
• This setting is valid only when the input signals are as follows; 
  NTSC, PAL, SECAM, M.NTSC, PAL60, PAL-M, PAL-N (BNC Dual Video Terminal Board (TY-FB9BD)) 
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 
1125/30p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)
• This setting is invalid when two screen display, digital zoom or Multi screen is selected.
• When “Display size” is set to “On”, “POS. /SIZE” adjustment cannot be used.
• Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.
Studio W/B
Off On
Off:  Nullify all the settings adjusted.
On:  Sets the color temperature for TV studio.
Note:  Valid only when the low is set as color temperature on screen adjustment.
Studio Gain
Off On
Sharpens the contrast for a better view when a part of the image is too light to see.
Off:  Disables “Studio Gain”.
On:  Enables “Studio Gain”.
Note:  This setting is valid only when the input signals are as follows:
  Component Video, RGB (analog), SDI, HDMI
Options
EnableOff-timer function
NormalInitial Power Mode0ID selectOffRemote IDOffSerial IDOffDisplay sizeOffStudio W/BOffStudio Gain
2/3
Options Adjustments 
						

							42
Item Effect Adjustments
Slot PowerOff  Auto  On 
Off:  Power is not transmitted to the slot power.
Auto:  Power is transmitted to the slot power only when main power is on.
On:  Power is transmitted to the slot power when main power is on or in the standby state.
Note:  In some cases, power is transmitted to the slot power when main power is on or in the standby 
state regardless of the slot power setting.
V.Installation
Off On
Off:  Sets fan to the horizontal installation mode.
On:  Sets fan to the vertical installation mode.
Notes:
• This functions when display is turned on.
• This mode is available for TH-42PH10UK, TH-50PH10UK and TH-58PH10UK.
• Turn up the power switch for the upward direction when you set Display vertically.
Rotate
Off On
Off:  Does not rotate the image.
On:  Rotates the image 180 degrees.
Serial Slot 
SelectSlot1  Slot2   Slot3
Selects the slot which communicates serial.
Notes: 
• The setting of an external command can be set only from the fi xed serial terminal (see page 11)
• Slot3 cannot be selected on TH-37PH10UK.
Normalization
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote 
ID” adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the 
 button on main unit together with  button on the remote control and hold for more than 5 seconds. The 
“SHIPPING” menu is displayed and the lock is released when it disappears.
3/3Options
Off
Off
Off V. lnstallation
Rotate
Slot1 Serial Slot Select Slot power
Options Adjustments 
						

							43
Options 
On Weekly Command TimerOnscreen display 
1/3 
 
Weekly Command Timer 
On Program1Function Monday 
Program3Tuesday --- Wednesday Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
Weekly Command Timer 
Program1On Monday Function 
Program3Tuesday 
--- Wednesday Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
Weekly Command Timer 
8:00 
10:30 01
02
1/8
--:-- 03--:-- 04--:-- 
--:-- 0512:00 069:12 PON
IMS:SL1 
--- 
--- 
--- 
---  DAM:ZOOM 
AVL:10 0708
1Program
Program number
Options Adjustments
Weekly Command Timer
You can set 7-day timer programming by setting time and command.
Note: 
Before setting Weekly Command Timer, set PRESENT TIME SETUP.  (see page 27)
Press to select Function.
Press to select “On”.
Note:
•  When Function is set to On, SET UP TIMER 
(see page 28) is unavailable and INTERVAL 
/ TIME OF DAY in MODE of SCREENSAVER 
(see page 29) cannot be selected.
1
Press to select a day.
Press to select a program number.
Note:
• You can set the program from 1 to 7.
--- indicates unset.
2
Press to select Program Edit.
Press to show the Program Edit screen.
Press to select Program.
Press to change the program numbers (1-7).
4 3
Press ACTION  (  ) button
Program Edit screen 
						

							44
Weekly Command Timer 
20:00 
20:30 57 
58 
8/8 
 
22:00 59 --:-- 60 --:-- 
--:-- 61 --:-- 62 --:-- AVL:00 
DAM:NORM 
POF 
--- 
--- 
---  --- 
--- 63 64 
1Program
Weekly Command Timer 
8:00 
10:30 
02 01
1/8 
 
--:-- 03--:-- 04--:-- 
--:-- 0512:00 069:12 PON
IMS:SL1 
--- 
--- 
--- 
---  DAM:ZOOM 
AVL:10 0708
1Program
Weekly Command Timer 
0210:30 Command No Time IMS:SL1 Command 
1Program
Weekly Command Timer 
Command 
02Command No 
IMS:SL1 10:30 Time 
1Program
Options Adjustments
Press to select a command number.
Press to show the previous / next command 
pages (1-8) of the selected program.
Press to show the command setting screen.
5
Press to select Command No.
Press to select a command number.
6
Press to select Time / Command.
Press to set each item.
Time:  Set the time to execute a command program.
      Pressing “ ” or “ ” button once changes 
“Time” 1 minute.
          Pressing “ ” or “ ” button continuously changes “Time” by 15 minutes.
Command:Select a command to execute at the set time. This unit has 64 commands to 
set. (see page 48)
Notes:
• 
Command is performed in order of execution time, regardless of the command number.
•  If a command execution time overlaps with that of other commands, these commands 
are performed in number order.
• Pressing 
, Time becomes --:-- and Command becomes ---.
7
Note:
• Press 
 to return to the previous screen.Command setting screen Command (--- indicates unset)
Set time of timer(--:-- indicates unset)
Command numbers 
						

							45
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSIGNAL
POWER SAVE
SET UP
SHIPPINGYES
This function allows you to reset the unit to the factory setting.
1
2
3
4
Press to display the SET UP menu.
Press to select “OSD LANGUAGE”.
Press and hold till the SHIPPING menu is 
displayed.
Press to select “YES”.
Press to confi rm.
[from the unit]
1  Press the MENU button till the Setup menu is displayed.
2  Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.
3  Press and hold the ENTER button till the SHIPPING menu is displayed.
4  Press the Volume Up “+” or Down “–” button to select “YES”.
5  Press the ENTER button and wait for 10 sec.
Note:
Press the R button to return to SET UP menu when SHIPPING menu is displayed.
Shipping condition 
						

							46
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Checks
Picture Sound
InterferenceNoisy SoundElectrical Appliances
Cars / Motorcycles
Fluorescent light
Normal PictureNo SoundVolume
(Check whether the mute function has been activated on the remote control.)
No PictureNo SoundNot plugged into AC outlet
Not switched on
PICTURE and BRIGHTNESS/Volume setting
(Check by pressing the power switch or stand-by button on the remote control.)
No PictureNormal SoundIf a signal with a non-applicable color system format, or frequency is input, only the input 
terminal indication is displayed.
No ColorNormal SoundColor controls set at minimum level. (see page 23, 24)
COLOR SYSTEM (see page 37)
No remote control operations can be performed. Check whether the batteries have discharged completely and, if they have not, whether they 
were inserted properly.
Check whether the remote control sensor is exposed to an outdoor light or a strong fl uorescent 
light.
Check whether the remote control designed specifi cally for use with the unit is being used. 
(The unit cannot be operated by any other remote control.)
A cracking sound is sometimes heard from the unit. If there is nothing wrong with the picture or sound, this is the sound of the cabinet undergoing 
very slight contractions in response to changes in the room temperature.  There are no adverse 
effects on the performance or other aspects.
The top or bottom of the picture on the screen is cut 
off when I use the zoom function.Adjust the position of the picture on the screen.
Areas at the top and bottom of the screen where 
the image is missing appear when I use the zoom 
function.When using a video software program (such as a cinema size program) with a screen wider 
than one in the 16:9 mode, blank areas separate from the images are formed at the top and 
bottom of the screen.
I can hear sounds coming from inside the unit. When the power is turned on, a sound of the display panel being driven may be heard: This is 
normal and not indicative of malfunctioning.
This Plasma Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type of input 
signal. However, this is not a malfunction.
Plasma Display panel
Symptoms Check
The screen darkens slightly when bright pictures with 
minimal movements are shown.The screen will darken slightly when photos, still images of a computer or other pictures with 
minimal movements are shown for an extended period. This is done to reduce image retention 
on the screen and the shortening of the screen’s service life: It is normal and not indicative of 
malfunctioning.
It takes a while for the picture to appear. The unit digitally processes the various signals in order to reproduce esthetically pleasing 
images. As such, it sometimes takes a few moments for the picture to appear when the power 
has been turned on, when the input has been switched or when the images for the main picture 
and sub picture on the two screens are swapped.
The edges of the images fl icker. Due to the characteristics of the system used to drive the panel, the edges may appear to fl icker 
in the fast-moving parts of the images: This is normal and not indicative of malfunctioning.
The brightness on both sides of images in NORMAL 
mode changes.When viewing the side panels at the “BRIGHT” or “MID” setting, the brightness on both sides 
may change depending on the kind of program shown: This is normal and not indicative of 
malfunctioning.
Some parts of the screen do not light up. The plasma display panel is manufactured using an extremely high level of precision technology, 
however, sometimes some parts of the screen may be missing picture elements or have luminous 
spots. This is not a malfunction.
Image retention appearsDo not allow a still picture to be displayed for an extended period, as this can cause a permanent 
image retention to remain on the Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext and images 
displayed in NORMAL mode.
Note:
The permanent image retention on the Plasma Display resulting from fi xed image use is not 
an operating defect and as such is not covered by the Warranty.
This product is not designed to display fi xed images for extended periods of time.
[For TH-42PH10UK, TH-50PH10UK, TH-58PH10UK]
Whirring sounds can be heard from the display unit.The display unit is fi tted with a cooling fan to dissipate heat generated during normal use. The 
whirring sound is caused by rotation of the fan and is not a malfunction.
Troubleshooting 
						

							47
VIDEO/COMPONENT/RGB/PC input signals
∗1: When selected the RGB format and 525p signal input to the Mini D-sub 15P terminal, it is recognized as VGA 60Hz signal.
∗2: When inputted VGA 60Hz format signal from the other than Mini D-sub 15P terminal, it is recognized as 525p signal.
Note: Signals without above specifi cation may not be displayed properly. VIDEO input
Signal nameHorizontal Vertical
frequency(kHz) frequency(Hz)
1 NTSC 15.73 59.94
2 PAL 15.63 50.00
3 PAL60 15.73 59.94
4 SECAM 15.63 50.00
5 Modifi ed NTSC 15.73 59.94
Applicable input signals for Component / Mini D-sub 15P (Component) / RGB / Mini D-sub 15P (RGB) (*
 Mark)
Signal nameHorizontal 
frequency 
(kHz)Vertical 
frequency 
(Hz)Dot clock 
frequency 
(MHz)
Component / 
Mini D-sub 15P 
(Component)RGB / 
Mini D-sub 15P 
(RGB)
1 525 (480) / 60i 15.73 59.94 13.5**2 525 (480) / 60p 31.47 59.94 27.0** ∗1
3 625 (575) / 50i 15.63 50.00 13.5
**4 625 (575) / 50p 31.25 50.00 27.0**5 750 (720) / 60p 45.00 60.00 74.25**6 750 (720) / 50p 37.50 50.00 74.25**7 1,125 (1,080) / 60i 33.75 60.00 74.25**8 1,125 (1,080) / 50i 28.13 50.00 74.25**9 1,125 (1,080) / 24sF 27.00 47.92 74.25**10 1,125 (1,080) / 30p 33.75 30.00 74.25**11 1,125 (1,080) / 25p 28.13 25.00 74.25**12 1,125 (1,080) / 24p 27.00 24.00 74.25**13 1,250 (1,080) / 50i 31.25 50.00 74.25**14 640 × 400 @70 Hz 31.46 70.07 25.17*15 640 × 480 @60 Hz 31.47 59.94 25.18* ∗2
16 640 × 480 @72 Hz 37.86 72.81 31.5
*17 640 × 480 @75 Hz 37.50 75.00 31.5*18 640 × 480 @85 Hz 43.27 85.01 36.0*19 852 × 480 @60 Hz 31.47 59.94 33.54* ∗2
20 800 × 600 @56 Hz 35.16 56.25 36.0
*21 800 × 600 @60 Hz 37.88 60.32 40.0*22 800 × 600 @72 Hz 48.08 72.19 50.0*23 800 × 600 @75 Hz 46.88 75.00 49.5*24 800 × 600 @85 Hz 53.67 85.06 56.25*25 1,024 × 768 @60 Hz 48.36 60.00 65.0*26 1,024 × 768 @70 Hz 56.48 70.07 75.0*27 1,024 × 768 @75 Hz 60.02 75.03 78.75*28 1,024 × 768 @85 Hz 68.68 85.00 94.5*29 1,152 × 864 @75 Hz 67.50 75.00 108.0*30 1,280 × 960 @60 Hz 60.00 60.00 108.0*31 1,280 × 960 @85 Hz 85.94 85.00 148.5*32 1,280 × 1,024 @60 Hz 63.98 60.02 108.0*33 1,280 × 1,024 @75 Hz 79.98 75.03 135.0*34 1,280 × 1,024 @85 Hz 91.15 85.02 157.5*35 1,600 × 1,200 @60 Hz 75.00 60.00 162.0*36  1,600 × 1,200 @65 Hz 81.25 65.00 175.5*37 1,066 × 600 @60 Hz 37.64 59.94 53.0*38 1,366 × 768 @60 Hz 48.36 60.00 86.71*39 Macintosh13” (640 × 480) 35.00 66.67 30.24*40 Macintosh16” (832 × 624) 49.72 74.54 57.28*41 Macintosh21” (1,152 × 870) 68.68 75.06 100.0* 
						

							48
Command list of Weekly Command Timer
No. Command Control details
1 AAC:MENCLR Audio Menu (Clear)
2 AAC:MENDYN Audio Menu (Dynamic)
3 AAC:MENSTD Audio Menu (Standard)
4 AAC:SURMON Surround (ON)
5 AAC:SUROFF Surround (OFF)
6 AMT:0 Audio Mute (OFF)
7 AMT:1 Audio Mute (ON)
8 ASO:M Audio out when PIP mode (Main Picture) 
9 ASO:S Audio out when PIP mode (Sub Picture) 
10 AVL:00 Audio Volume (00)
11 AVL:10 Audio Volume (10)
12 AVL:20 Audio Volume (20)
13 AVL:30 Audio Volume (30)
14 AVL:40 Audio Volume (40)
15 AVL:50 Audio Volume (50)
16 AVL:60 Audio Volume (60)
17 DAM:FULL Aspect (FULL)
18 DAM:JUST Aspect (JUST)
19 DAM:NORM Aspect (NORMAL)
20 DAM:SELF Aspect (Panasonic Auto)
21 DAM:ZOOM Aspect (ZOOM)
22 DWA:OFF Dual Picture mode (OFF)
23 DWA:OVL1 Advanced PIP mode (1) (see page 22)
24 DWA:OVL2 Advanced PIP mode (2) (see page 22)
25 DWA:OVL3 Advanced PIP mode (3) (see page 22)
26 DWA:OVL4 Advanced PIP mode (4) (see page 22)
27 DWA:OVL5 Advanced PIP mode (5) (see page 22)
28 DWA:OVL6 Advanced PIP mode (6) (see page 22)
29 DWA:OVLOF Advanced PIP mode (OFF) (normal two screen display mode)
30 DWA:OVLON Advanced PIP mode (ON)
31 DWA:PIN0 The location of the sub picture (lower right)
32 DWA:PIN1 The location of the sub picture (lower left)
33 DWA:PIN2 The location of the sub picture (upper left)
34 DWA:PIN3 The location of the sub picture (upper right)
35 DWA:PIP Dual Picture mode (Picture in Picture)
36 DWA:POP Dual Picture mode (Picture out Picture)
37 DWA:SWP Swap main picture and sub picture when PIP mode
38 DWA:TWN Dual Picture mode (Picture and Picture)
39 IMS:PC1 Input select (PC1) (Main Picture when PIP mode)
40 IMS:SL1 Input select (SLOT1) (Main Picture when PIP mode)
41 IMS:SL1A Input select (SLOT1A) (Main Picture when PIP mode)
42 IMS:SL1B Input select (SLOT1B) (Main Picture when PIP mode)
43 IMS:SL2 Input select (SLOT2) (Main Picture when PIP mode)
44 IMS:SL2A Input select (SLOT2A) (Main Picture when PIP mode)
45 IMS:SL2B Input select (SLOT2B) (Main Picture when PIP mode)
46
IMS:SL3∗
1Input select (SLOT3) (Main Picture when PIP mode)
47 ISS:PC1 Sub Picture Input Select (PC1)
48 ISS:SL1 Sub Picture Input Select (SLOT1)
49 ISS:SL1A Sub Picture Input Select (SLOT1A)
50 ISS:SL1B Sub Picture Input Select (SLOT1B)
51 ISS:SL2 Sub Picture Input Select (SLOT2)
52 ISS:SL2A Sub Picture Input Select (SLOT2A)
53 ISS:SL2B Sub Picture Input Select (SLOT2B)
54
ISS:SL3∗
1Sub Picture Input Select (SLOT3)
55OSP:SCR0 Screen Saver WHITE BAR SCROLL (OFF)
56OSP:SCR1 Screen Saver WHITE BAR SCROLL (ON)
57 POF Power OFF
58 PON Power ON
59SSC:FNC0 Screen Saver function (WHITE BAR SCROLL)
60SSC:FNC1 Screen Saver function (NEGATIVE)
61SSC:MOD0 ScreenSaver (Mode (OFF))
62SSC:MOD3 ScreenSaver (Mode (ON))
63
VMT:0∗
2Picture Mute (OFF)
64
VMT:1∗2Picture Mute (ON)
∗1  These commands are unavailable on TH-37PH10UK because the model is not equipped with SLOT3.
∗2  Picture Mute cannot be unlocked by powering off/on with the remote control. Turn off and on again with the button 
on the unit or enter the command VMT:0 to unlock Picture Mute. 
						

							49
Specifi cations
TH-37PH10UK TH-42PH10UK
Power Source 120 V AC, 50/60 Hz
Power Consumption
Power on 340 W 380 W
Stand-by condition Save OFF 0.7 W, Save ON 0.5 W Save OFF 0.7 W, Save ON 0.5 W
Power off condition 0.2 W 0.2 W
Plasma Display panelDrive method : AC type 37-inch,
16:9 aspect ratioDrive method : AC type 42-inch,
16:9 aspect ratio
Screen size32.2” (819 mm) (W) × 18.0” (457 mm) (H)
× 37” (938 mm) (diagonal)36.3” (922 mm) (W) × 20.4” (518 mm) (H) 
× 42” (1,057 mm) (diagonal)
(No.of pixels) 737,280 (1,024 (W) × 720 (H))
[3,072 × 720 dots]786,432 (1,024 (W) × 768 (H))
[3,072 × 768 dots]
Operating condition
Temperature 32 °F - 104 °F (0 °C - 40 °C)
Humidity 20 % - 80 %
Applicable signals
Color System NTSC, PAL, PAL60, SECAM, Modifi ed NTSC
Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 50i · 24p · 25p 
· 30p · 24sF ···· SMPTE274M, 1250 (1080) / 50i 
PC signals VGA, SVGA 
XGA, SXGA, UXGA  ···· (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 HzVGA, SVGA, XGA 
SXGA, UXGA  ···· (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
AV IN VIDEO IN (BNC)   1.0 Vp-p (75 Ω)
S VIDEO IN (MINI DIN 4PIN)      Y: 1.0 Vp-p (75 Ω), C: 0.286 Vp-p (75 Ω)
AUDIO IN (RCA PIN JACK × 4)   0.5 Vrms (high impedance)
COMPONENT/RGB IN Y/G (BNC)   with/sync 1.0 Vp-p (75 Ω)
P
B/B (BNC), PR/R (BNC)   0.7 Vp-p (75 Ω) 
AUDIO IN (RCA PIN JACK × 2)   0.5 Vrms (high impedance)
PC IN (HIGH-DENSITY MINI D-SUB 15PIN)   Y or G with/sync 1.0 Vp-p (75 Ω)
   Y or G without/sync 0.7 Vp-p (75 Ω)
 B/P
B/CB:  0.7 Vp-p (75 Ω)
 R/P
R/CR:  0.7 Vp-p (75 Ω)
 HD/VD:  1.0 - 5.0 Vp-p (high impedance)
AUDIO IN (M3 JACK)     0.5 Vrms (high impedance)
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN)  RS-232C COMPATIBLE
SPEAKERS (6 Ω) 16W [8 W + 8 W] (10 % THD)
Accessories Supplied
Remote Control TransmitterEUR7636070R
Batteries 2 × AA Size
Fixing bands TMME203 × 2
Dimensions (W × H × D)
36.2” (920 mm) × 21.7” (550 mm) × 3.5” (89 mm)40.2” (1,020 mm) × 24” (610 mm) × 3.5” (89 mm) 
Mass (weight)
main unit only approx. 48.5 lbs approx. 57.3 lbs
with speakers approx. 57.3 lbs approx. 66.1 lbs
Note:
Design and specifi cations are subject to change without notice. Mass and dimensions shown are approximate. 
						

							50
Specifi cations
TH-50PH10UK TH-58PH10UK
Power Source 120 V AC, 50/60 Hz
Power Consumption
Power on 505 W 660 W
Stand-by condition Save OFF 0.6 W, Save ON 0.4 W Save OFF 0.6 W, Save ON 0.4 W
Power off condition 0.1 W 0.1 W
Plasma Display panelDrive method : AC type 50-inch,
16:9 aspect ratioDrive method : AC type 58-inch,
16:9 aspect ratio
Screen size43.5” (1,106 mm) (W) × 24.5” (622 mm) (H) 
× 50” (1,269 mm) (diagonal)50.7” (1,287 mm) (W) × 28.5” (723 mm) (H) 
× 58” (1,476 mm) (diagonal)
(No.of pixels) 1,049,088 (1,366 (W) × 768 (H))
[4,098 × 768 dots]1,049,088 (1,366 (W) × 768 (H))
[4,098 × 768 dots]
Operating condition
Temperature 32 °F - 104 °F (0 °C - 40 °C)
Humidity 20 % - 80 %
Applicable signals
Color System NTSC, PAL, PAL60, SECAM, Modifi ed NTSC
Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 50i · 24p · 25p 
· 30p · 24sF ···· SMPTE274M, 1250 (1080) / 50i 
PC signals VGA, SVGA, XGA 
SXGA, UXGA  ···· (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
AV IN VIDEO IN (BNC)   1.0 Vp-p (75 Ω)
S VIDEO IN (MINI DIN 4PIN)      Y: 1.0 Vp-p (75 Ω), C: 0.286 Vp-p (75 Ω)
AUDIO IN (RCA PIN JACK × 4)   0.5 Vrms (high impedance)
COMPONENT/RGB IN Y/G (BNC)   with/sync 1.0 Vp-p (75 Ω)
P
B/B (BNC), PR/R (BNC)   0.7 Vp-p (75 Ω) 
AUDIO IN (RCA PIN JACK × 2)   0.5 Vrms (high impedance)
PC IN (HIGH-DENSITY MINI D-SUB 15PIN)   Y or G with/sync 1.0 Vp-p (75 Ω)
   Y or G without/sync 0.7 Vp-p (75 Ω)
 B/P
B/CB:  0.7 Vp-p (75 Ω)
 R/P
R/CR:  0.7 Vp-p (75 Ω)
 HD/VD:  1.0 - 5.0 Vp-p (high impedance)
AUDIO IN (M3 JACK)     0.5 Vrms (high impedance)
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN)  RS-232C COMPATIBLE
SPEAKERS (6 Ω) 16W [8 W + 8 W] (10 % THD)
Accessories Supplied
Remote Control TransmitterEUR7636070R
Batteries 2 × AA Size
Fixing bands TMME203 × 2
Dimensions (W × H × D)
47.6” (1,210 mm) × 28.5” (724 mm) × 3.7” (95 mm)  55.1” (1,399 mm) × 33.2” (843 mm) × 3.9” (99 mm) 
Mass (weight)
main unit only approx. 79.4 lbs approx. 119 lbs
with speakers approx. 88.2 lbs approx. 130.1 lbs
Note:
Design and specifi cations are subject to change without notice. Mass and dimensions shown are approximate.