Home
>
Panasonic
>
Display
>
Panasonic High Definition Hospitality Plasma Display Th 37pr11 Operating Instructions
Panasonic High Definition Hospitality Plasma Display Th 37pr11 Operating Instructions
Here you can view all the pages of manual Panasonic High Definition Hospitality Plasma Display Th 37pr11 Operating Instructions . The Panasonic manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
1/2
SIGNAL
SCREENSAVER
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
SET UP
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3) OFF
4:3
[ VIDEO ]
NOISE REDUCTION
OFFREFRESH RATE100 Hz
3 : 2 PULLDOWN
SIGNAL
OFF
[
Digital ]
NOISE REDUCTION
OFF
REFRESH RATE
100 HzH-FREQ.
V-FREQ.kHz
Hz
63.98
60.02
SIGNAL FORMAT 1280×1024/60
3 : 2 PULLDOWN
SIGNAL
OFF
[ COMPONENT ]
XGA...](http://img.usermanuals.tech/thumb/58/71547/w300_th-37pr11_en_om_d-30.png "Page 31
1/2
SIGNAL
SCREENSAVER
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL
POWER SAVE
SET UP
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3) OFF
4:3
[ VIDEO ]
NOISE REDUCTION
OFFREFRESH RATE100 Hz
3 : 2 PULLDOWN
SIGNAL
OFF
[
Digital ]
NOISE REDUCTION
OFF
REFRESH RATE
100 HzH-FREQ.
V-FREQ.kHz
Hz
63.98
60.02
SIGNAL FORMAT 1280×1024/60
3 : 2 PULLDOWN
SIGNAL
OFF
[ COMPONENT ]
XGA...")
1/2 SIGNAL SCREENSAVER PC OFF STANDBY SAVE OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SAVE SET UP 3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF 4:3 [ VIDEO ] NOISE REDUCTION OFFREFRESH RATE100 Hz 3 : 2 PULLDOWN SIGNAL OFF [ Digital ] NOISE REDUCTION OFF REFRESH RATE 100 HzH-FREQ. V-FREQ.kHz Hz 63.98 60.02 SIGNAL FORMAT 1280×1024/60 3 : 2 PULLDOWN SIGNAL OFF [ COMPONENT ] XGA...
Page 32
![Page 32
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3) OFF
4:3
[ VIDEO ]
3 : 2 PULLDOWN
OFF
XGA MODE1024 × 768
32
3:2 PULLDOWN COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
SET UP for Input Signals
Press to select the “COLOR SYSTEM” or “Panasonic AUTO”.
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of...](http://img.usermanuals.tech/thumb/58/71547/w300_th-37pr11_en_om_d-31.png "Page 32
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3) OFF
4:3
[ VIDEO ]
3 : 2 PULLDOWN
OFF
XGA MODE1024 × 768
32
3:2 PULLDOWN COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
SET UP for Input Signals
Press to select the “COLOR SYSTEM” or “Panasonic AUTO”.
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of...")
3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF 4:3 [ VIDEO ] 3 : 2 PULLDOWN OFF XGA MODE1024 × 768 32 3:2 PULLDOWN COLOR SYSTEM / Panasonic AUTO Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.(“SIGNAL [VIDEO]” menu is displayed.) SET UP for Input Signals Press to select the “COLOR SYSTEM” or “Panasonic AUTO”. Press to select each function. If the image becomes unstable: With the system set on Auto, under conditions of...
Page 33
![Page 33
REFRESH RATE100 Hzq
ADVANCED NR [
VIDEO ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[
Digital ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[
COMPONENT ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[
RGB ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
()NOISE REDUCTION
OFF
()NOISE REDUCTIONADVANCED
33
VIDEO NR: Automatically reduces unwanted picture noise.
MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.
BLOCK NR: Reduces block noise when...](http://img.usermanuals.tech/thumb/58/71547/w300_th-37pr11_en_om_d-32.png "Page 33
REFRESH RATE100 Hzq
ADVANCED NR [
VIDEO ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[
Digital ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[
COMPONENT ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
ADVANCED NR
[
RGB ]
MOSQUITO NRVIDEO NR
BLOCK NROFF OFF
OFF
()NOISE REDUCTION
OFF
()NOISE REDUCTIONADVANCED
33
VIDEO NR: Automatically reduces unwanted picture noise.
MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos.
BLOCK NR: Reduces block noise when...")
REFRESH RATE100 Hzq ADVANCED NR [ VIDEO ] MOSQUITO NRVIDEO NR BLOCK NROFF OFF OFF ADVANCED NR [ Digital ] MOSQUITO NRVIDEO NR BLOCK NROFF OFF OFF ADVANCED NR [ COMPONENT ] MOSQUITO NRVIDEO NR BLOCK NROFF OFF OFF ADVANCED NR [ RGB ] MOSQUITO NRVIDEO NR BLOCK NROFF OFF OFF ()NOISE REDUCTION OFF ()NOISE REDUCTIONADVANCED 33 VIDEO NR: Automatically reduces unwanted picture noise. MOSQUITO NR: Reduces mosquito noise around subtitles on MPEG videos. BLOCK NR: Reduces block noise when...
Page 34
![Page 34
SYNC
SIGNAL[
RGB ]
3 : 2 PULLDOWN
XGA MODE AUTO
OFF
1024 × 768
SYNC AUTO
SYNC ON G
SYNC VBS
H-FREQ.
V-FREQ.kHz
Hz
63.98
60.02
SIGNAL FORMAT 1280×1024/60
34
SET UP for Input Signals
Select SIGNAL from the “SET UP” menu during RGB input signal.
SYNC
Setting RGB sync signal
Confi rm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT
signal).
AUTO: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync.
ON G: Uses a...](http://img.usermanuals.tech/thumb/58/71547/w300_th-37pr11_en_om_d-33.png "Page 34
SYNC
SIGNAL[
RGB ]
3 : 2 PULLDOWN
XGA MODE AUTO
OFF
1024 × 768
SYNC AUTO
SYNC ON G
SYNC VBS
H-FREQ.
V-FREQ.kHz
Hz
63.98
60.02
SIGNAL FORMAT 1280×1024/60
34
SET UP for Input Signals
Select SIGNAL from the “SET UP” menu during RGB input signal.
SYNC
Setting RGB sync signal
Confi rm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT
signal).
AUTO: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync.
ON G: Uses a...")
SYNC SIGNAL[ RGB ] 3 : 2 PULLDOWN XGA MODE AUTO OFF 1024 × 768 SYNC AUTO SYNC ON G SYNC VBS H-FREQ. V-FREQ.kHz Hz 63.98 60.02 SIGNAL FORMAT 1280×1024/60 34 SET UP for Input Signals Select SIGNAL from the “SET UP” menu during RGB input signal. SYNC Setting RGB sync signal Confi rm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal). AUTO: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync. ON G: Uses a...
Page 35
Options Weekly Command Timer 1/3 Initial INPUT Onscreen display On O f f Off Off 0 0Maximum VOL level Initial VOL levelOffINPUT lockOffButton lockOffRemocon User levelOffAdvanced PIP Options Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID 2/3 3/3 Options O f f Off Off Clock Display All Aspect Slot1 Serial Slot Select Slot power Off Power On Screen Delay 35 1 2 3 5Press to display the SET UP menu. 4 6 Item Adjustments Weekly Command TimerSets...
Page 36
36 ItemAdjustments INPUT lockOff PC INPUT1 INPUT2 INPUT3 Locks the input switch operation. Notes: • Only the adjusted signal is displayed (see page 13). • Signal can be displayed when the Terminal board is installed. • Input switch can be used when this is set to “Off”. • In two screen display mode, if anything other than “Off” is set, the value will be fi xed as the value input in the single screen display mode. • When a dual input terminal board is attached, A or B is displayed depending on...
Page 37
![Page 37
37
ItemAdjustments
Power On Screen
Delay Off 1 2 3.... 30
You can set the power-on delay time of the displays to reduce the power l\
oad, when you press POWER switch
to turn on the multiple displays that are set together.
Set each display’s setting individually.
Off: The display will be turned on at the same time as POWER switch is presse\
d.
1 to 30 (sec.): Set the power-on delay time (second).
After pressing POWER switch, the display will be powered on with time delay depending...](http://img.usermanuals.tech/thumb/58/71547/w300_th-37pr11_en_om_d-36.png "Page 37
37
ItemAdjustments
Power On Screen
Delay Off 1 2 3.... 30
You can set the power-on delay time of the displays to reduce the power l\
oad, when you press POWER switch
to turn on the multiple displays that are set together.
Set each display’s setting individually.
Off: The display will be turned on at the same time as POWER switch is presse\
d.
1 to 30 (sec.): Set the power-on delay time (second).
After pressing POWER switch, the display will be powered on with time delay depending...")
37
ItemAdjustments
Power On Screen
Delay Off 1 2 3.... 30
You can set the power-on delay time of the displays to reduce the power l\
oad, when you press POWER switch
to turn on the multiple displays that are set together.
Set each display’s setting individually.
Off: The display will be turned on at the same time as POWER switch is presse\
d.
1 to 30 (sec.): Set the power-on delay time (second).
After pressing POWER switch, the display will be powered on with time delay depending...
Page 38
Options On Weekly Command TimerOnscreen display 1/3 Weekly Command Timer Program1MondayOnFunction Program3Tuesday --- Wednesday Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit yProgram3Thursday --- Friday Program6Saturday Program4Sunday Program Edit Weekly Command Timer 8:00 10:30 0102 1/8 --:-- 03--:-- 04--:-- --:-- 0512:00 069:12 PON IMS:SL1 --- --- --- --- DAM:ZOOM AVL:10 0708 1Program Weekly Command Timer 20:00 20:30 57 58 8/8 22:00 59 --:-- 60 --:--...
Page 39
Weekly Command Timer 0210:30 Command No Time IMS:SL1 Command 1Program Weekly Command Timer Command 02Command No IMS:SL1 10:30 Time 1Program 1/2 SIGNALPC OFF STANDBY SAVE OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SAVE SET UP SCREENSAVER SHIPPING YES 39 This function allows you to reset the unit to the factory setting. Shipping condition 1 2 3 4Press to display the SET UP menu. Press to select “OSD LANGUAGE”. Press and hold...
Page 40
![Page 40
40
Troubleshooting
Before you call for service, determine the symptoms and make a few simpl\
e checks as shown below.
SymptomsChecks
PictureSound
InterferenceNoisy SoundElectrical Appliances
Cars / Motorcycles
Fluorescent light
Normal PictureNo Sound
Volume
(Check whether the mute function has been activated on the remote contr\
ol.)
No PictureNo SoundNot plugged into AC outlet
Not switched on
PICTURE and BRIGHTNESS/Volume setting
(Check by pressing the power switch or stand-by button on the remote co\...](http://img.usermanuals.tech/thumb/58/71547/w300_th-37pr11_en_om_d-39.png "Page 40
40
Troubleshooting
Before you call for service, determine the symptoms and make a few simpl\
e checks as shown below.
SymptomsChecks
PictureSound
InterferenceNoisy SoundElectrical Appliances
Cars / Motorcycles
Fluorescent light
Normal PictureNo Sound
Volume
(Check whether the mute function has been activated on the remote contr\
ol.)
No PictureNo SoundNot plugged into AC outlet
Not switched on
PICTURE and BRIGHTNESS/Volume setting
(Check by pressing the power switch or stand-by button on the remote co\...")
40 Troubleshooting Before you call for service, determine the symptoms and make a few simpl\ e checks as shown below. SymptomsChecks PictureSound InterferenceNoisy SoundElectrical Appliances Cars / Motorcycles Fluorescent light Normal PictureNo Sound Volume (Check whether the mute function has been activated on the remote contr\ ol.) No PictureNo SoundNot plugged into AC outlet Not switched on PICTURE and BRIGHTNESS/Volume setting (Check by pressing the power switch or stand-by button on the remote co\...