Panasonic High Definition Hospitality Lcd Display Th 32lrt12 Operating Instructions

11
Connections
AV connection
Notes:
• Additional equipment and cables shown are not supplied with this set.
If S Video and Video devices are both connected, the S Video input signal is the priority source.
• Example of input signal source
Component (YPbPr) connection
Example of input signal source
Note:
Additional equipment and cables shown are not supplied with this set. S VIDEO VCR
CAMCORDER
VCR
S VIDEO OUT
VIDEO  OUT
AUDIO  OUT
L
R
Back side
Front side
AUDIO OUT
Y,  P
B, PR,
OUT
P
R
PB
Y
L
RDVD...

12
Connections
PC Input Terminals connection
COMPUTERConnect a cable which matches
the audio output terminal on the computer.
Conversion adapter 
(if necessary) RGB
PC cable
Audio Stereo plugMini D-sub 15p
(Male) (Female)
Notes:
• 
Computer  signals  which  can  be  input  are  those  with  a  horizontal  scanning  frequency  of  15  to  79.97  kHz  and  vertical 
scanning  frequency  of  48  to  75  Hz.  (However,  the  image  will  not  be  displayed  properly  if  the  signals  exceed  1,200 
lines.)...

13
HDMI connection
Note:
1. Additional equipment and HDMI cables shown are not supplied with this se\
t.
2. HDMI Version 1.2.DVD Player or SET-TOP-BOX
(HDMI compatible machines only)HDMI cable
Connections
Audio Out connection
Note:
Additional equipment and cables shown are not supplied with this set.
AUDIO
OUT R
L
Audio equipment
HDMI 
AV OUT 

1
Connections
Serial Terminals connection
Notes:
• Use  the  RS-232C  straight  cable  to  connect  the  computer  to 
the Display.
•
   The computer shown is for example purposes only.
•  Additional equipment and cables shown are not supplied with 
this set.
COMPUTER
D-sub 9p (Male)
(Female)
RS-232C Straight cable
The SERIAL terminal is used when the Display is controlled by a computer.
The  SERIAL  terminal  conforms  to  the  RS-232C  interface 
specification, so that the Display can be...

DISPLAY
POWERINPUTMUTE
RETURN
OFF TIMERRECALL ASPECT
CH VOL
MENU
TNQ4CM051
15
Power ON / OFF 
Connect the plug to the Wall Outlet.
Press the POWER button on the remote control to 
turn the Display on.
Power Indicator: Green
Press  the POWER  button  on  the  remote  control  to 
turn the Display off.
Power Indicator: Red
POWER
Power Indicator Power Switch Remote Control Sensor
1
P r e s s   t h e   P o w e r   s w i t c h   o n   t h e 
Display  to  turn  the  set  on:  Power-
On
2
Power Indicator:...

16
Adjust
Initial selections
Selecting the On-Screen Menu Language
Selecting the input signal
Note:
Selecting is also possible by pressing the INPUT button on the unit.
1Display the menu screen.
 
MENU
2Select “Setup Menu”.
M a i n   M e n uP i c t u r e   M e n uS o u n d   M e n uS e t u p   M e n u
3Select “Language”.
Setup Menu Language
Movie Mode English
On
Select your preferred language.
EnglishFrançais Español
Press repeatedly until the desired input source signal is displayed 
on the...

17
Basic Controls
Main Unit
Power Indicator
The Power Indicator will light.
  •
  Power-OFF  ... Indicator not illuminated
  •

  Standby  ........ Red (The Monitor will still consume power as long as the AC cord is still connected to the wall outlet.)
  •

  Power-ON  ..... Green
CH
VOL
MENU
INPUT
Power On / Off Switch
Remote control sensor
(TH-32LRT12U)
Channel Adjustment
P r e s s   t o   c h a n g e   t o   t h e   n e x t   o r 
previous channel.
Lift the door to open
(TH-37LRT12U)
INPUT button...

18
POWERINPUTMUTE
RETURN
OFF TIMERRECALL ASPECT
CH VOL
MENU
TNQ4CM051
DISPLAY
Basic Controls
OK button
Press to make selections. POWER button
The  Monitor  must  first  be  plugged  into 
the wall outlet.
Press this button to turn the Monitor on, 
from standby mode. Press it again to turn 
the Monitor Off to standby mode.
Volume Adjustment
Press the Volume Up “+” or Down “–” 
button  to  increase  or  decrease  the 
sound volume level.
Remote Control Transmitter
INPUT button (see page 16)
MENU button...

19
ASPECT Controls
The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.
Aspect modePicture  Enlarged screen Description
16:9
The display of the pictures fills the screen.
In  the  case  of  SD  signals,  pictures  with  a  4:3  aspect  ratio  are 
enlarged horizontally, and displayed. This mode is suited to displaying 
anamorphic pictures with a 16:9 aspect ratio.
JUST
Pictures with a 4:3 aspect ratio are enlarged horizontally so that...

20
Remote ControlUnit
1Display the menu screen.MENU
    Press the menu button.Press the MENU button.1  
Press  the  CH  buttons  to  select  the 
menu.
2 Press the MENU button.
2Select the menu.
M a i n   M e n u
P i c t u r e   M e n uS o u n d   M e n uS e t u p   M e n u
3Select the item.Press  the  CH  <  or  >  buttons  to  select 
the item.
Picture Menu Picture Mode
Standard
Contrast
Brightness
Color
Tint
Sharpness 32
32
32
00
12
User
Off
(Example: Picture Menu)
Adjust or select.Press the VOL...