Panasonic High Definition Hospitality Lcd Display Th 32lrt12 Operating Instructions

							The illustration shown is an image.
Before connecting, operating or adjusting this product, please read thes\
e instructions completely.
Please keep this manual for future reference.
La ilustración mostrada es una imagen.
Antes de conectar, utilizar o ajustar este producto, lea completamente este manual de instrucciones;
y guárdelo para consultarlo en el futuro en caso de ser necesario.
TH-32LRT12U
TH-37LRT12UModel No.
Número de modelo
Operating Instructions
Manual de instrucciones
High Definition Hospitality LCD Display
Pantalla de LCD de alta definición para la industria hotelera
English
TQB4CM171
Español 
						

							2
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.T h e  l i g h t n i n g  f l a s h  w i t h 
arrow-head within a triangle 
is  intended  to  tell  the  user 
that parts inside the product 
are  a  risk  of  electric  shock 
to persons. The  exclamation  point  within 
a  t r i a n g l e  i s  i n t e n d e d  t o 
tell  the  user  that  important 
o p e r a t i n g  a n d  s e r v i c i n g 
instructions are in the papers 
with the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING  : To prevent damage which may result in fire or shock hazard, do not expose this apparatus to rain 
or moisture.
 

  Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. 
    (including on shelves above, etc.)
WARNING  : To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified 
service personnel.
This video monitor is designed to display television content from a separate TV tuner.  Full-power analog TV broadcasting 
in the United States will end (as required by law) on February 17, 2009, after which full-power TV broadcasts will be 
digital only. If this device is used after that date to record or display programming from a product with a TV tuner that 
relies on a TV antenna, that product would need to contain a digital tuner, or a TV Converter would be necessary to 
tune the digital signal received with a TV antenna. Analog TVs should continue to work as before for other purposes 
(e.g., for watching low-power TV stations still broadcasting in analog, watching pre-recorded movies, or playing video 
games). When a Converter is used with an older television receiver or directly with this product, a signal splitter might 
be necessary to continue to receive low-power analog broadcasts via an antenna. For more information, please see 
www.DTV.gov or 1-888-CALL-FCC. For information on the TV Converter program, and on government coupons that 
may be used toward the purchase of one, see www.dtv2009.gov, or call the NTIA at 1-888-DTV-2009. Please check 
with your cable or satellite service provider if you have questions abou\
t your cable or satellite set-top box. 
						

							3
Important Safety Instructions
 1)  Read these instructions.
  2)  Keep these instructions.
  3)  Heed all warnings.
  4)  Follow all instructions.
  5)  Do not use this apparatus near water.
  6)  Clean only with dry cloth.
  7)  Do not block any ventilation openings. Install in accordance with the ma\
nufacturer’s instructions.
  8)  Do  not  install  near  any  heat  sources  such  as  radiators,  heat  registers,  stoves,  or  other  apparatus  (including 
amplifiers) that produce heat.
  9)

  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one 
wider  than  the  other. A  grounding  type  plug  has  two  blades  and  a  third  grounding  prong.  The  wide  blade  or  the 
third  prong  are  provided  for  your  safety.  If  the  provided  plug  does  not  fit  into  your  outlet,  consult  an  electrician  for 
replacement of the obsolete outlet.
  10)

  Protect  the  power  cord  from  being  walked  on  or  pinched  particularly  at  plugs,  convenience  receptacles,  and  the 
point where they exit from the apparatus.
1

1)   Only use attachments / accessories specified by the manufacturer.
12)  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with 
the  apparatus.  When  a  cart  is  used,  use  caution  when  moving  the  cart  /  apparatus  combination 
to avoid injury from tip-over.
13)

  Unplug this apparatus during lightning storms or when unused for long pe\
riods of time.
14)  Refer  all  servicing  to  qualified  service  personnel.  Servicing  is  required  when  the  apparatus  has  been  damaged 
in  any  way,  such  as  power-supply  cord  or  plug  is  damaged,  liquid  has  been  spilled  or  objects  have  fallen  into  the 
apparatus, the apparatus has been exposed to rain or moisture, does not \
operate normally, or has been dropped.
15)

  To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected. 
						

							
Table of Contents
Dear Panasonic Customer
Welcome  to  the  Panasonic  family  of  customers.  We  hope  that  you  will  have  many  years  of  enjoyment 
from your new LCD Display.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments, 
and retain them for future reference.
Retain your purchase receipt as well, and record the model number and serial number of your set in the 
space provided on the rear cover of these instructions.
Important Safety Instructions 
.................................. 3
Table of Contents  ..................................................... 
FCC STATEMENT  ...................................................... 5
Safety Precautions  ................................................... 6
Maintenance  .............................................................. 7
Accessories  .............................................................. 8
Accessories Supplied  .............................................. 8
Remote Control Batteries  ........................................ 8
Location  ................................................................... 9
Preparation for Wall-hanging  ................................... 9
Connections  ............................................................ 10
AV connection.........................................................11
Component (YPbPr) connection  .............................11
PC Input Terminals connection  .............................. 12
HDMI connection  ................................................... 13
Audio Out connection  ............................................ 13
Serial Terminals connection................................... 14
Power ON / OFF   ..................................................... 15
Using the Power Switch  ........................................ 15
Using the Power Button  ......................................... 15 Initial selections...................................................... 16
Selecting the input signal  ...................................... 16
Selecting the On-Screen Menu Language  ............ 16
Basic Controls  ........................................................ 17
ASPECT Controls  ................................................... 19
On-Screen Menu Display  ....................................... 20
Picture Menu  ........................................................... 22
Sound Menu  ............................................................ 23
Setup Menu  ............................................................. 2
HOTEL MODE Setup  ............................................... 26
Troubleshooting  ..................................................... 28
Applicable Input Signals  ........................................ 29
Specifications  ......................................................... 30
Panasonic Professional Flat Panel 
Display Limited Warranty  ...................................... 31
LIMITED WARRANTY STATEMENT  ....................... 32
Customer Service  ................................................... 33 
						

							5
This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device,  pursuant  to  Part 
15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful  interference  in  a 
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 
and  used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio  communications.  However, 
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the f\
ollowing measures:• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
This  device  complies  with  Part15  of  the  FCC  Rules.  Operation  is  subject  to  the  following  two  conditions:(1)  This 
device  may  not  cause  harmful  interference,  and  (2)  this  device  must  accept  any  interference  received,  including 
interference that may cause undesired operation.
FCC CAUTION: 
To assure continued compliance, follow the attached installation instructions and use only shielded interface 
cables  when  connecting  to  computer  or  peripheral  devices.  Any  changes  or  modifications  not  expressly 
approved by Panasonic Corp. of North America could void the user's authority to operate this device.
FCC Declaration of Conformity
Model No. TH-32LRT12U, TH-37LRT12U
  Responsible Party:
  Panasonic Corporation of North America
     One Panasonic Way 1F-10, Secaucus, NJ 07094
Contact Source:  Panasonic Professional Display Company
     Panasonic Plasma Concierge 1-800-973-4390
CANADIAN NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
Note: Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen. 
However, it will disappear after a while.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain 
readily operable.
Trademark Credits
•
  VGA is a trademark of International Business Machines Corporation.
•  Macintosh is a registered trademark of Apple Computer, USA.
•  VGA, SVGA, and XGA are registered trademarks of the Video Electronics Standard Association.
  Even  if  no  special  notation  has  been  made  of  company  or  product  trademarks,  these  trademarks  have  been  fully 
respected.
•

  HDMI,  the  HDMI  logo  and  High-Definition  Multimedia  Interface  are  trademarks  or  registered  trademarks  of  HDMI 
Licensing LLC.
•
•
FCC STATEMENT 
						

							6
Safety Precautions
This  LCD  Display  is  for  use  only  with  the  following  optional  accessories. Use  with  any  other  type  of  optional 
accessories may cause instability which could result in the possibility of injury . 
(All of the following accessories are manufactured by Panasonic Corpora\
tion.)
  CAUTION
 
 When using the LCD Display
Do not bring your hands, face or objects close to the 
ventilation holes of the Display.
•

  Top  of  the  Display  is  usually  very  hot  due  to  the  high 
temperature  of  exhaust  air  being  released  through  the 
ventilation holes. Burns or personal injuries can happen if 
any  body  parts  are  brought  too  close.  Placing  any  object 
near the top of the display could also result in heat damages 
to the object as well as to the Display if its ventilation holes 
are blocked.
Be  sure  to  disconnect  all  cables  before  moving  the 
Display. •
  
Moving the Display with its cables attached might damage 
the cables which, in turn, can cause fire or electric shock.
Disconnect  the  power  plug  from  the  wall  outlet  as  a  safety precaution before carrying out any cleaning.
•
  Electric shocks can result if this is not done.
Clean  the  power  cable  regularly  to  prevent  it  from 
becoming dusty. •
  Built-up  dust  on  the  power  cord  plug  can  increase 
humidity which might damage the insulation and cause 
fire.  Unplug  the  cord  from  the  wall  outlet  and  clean  it 
with a dry cloth.
This  Display  radiates  infrared  rays,  therefore  it  may 
affect other infrared communication equipment.
Install your infrared sensor in a place away from direct 
or reflected light from your Display.
Note:
Image retention may occur. If you display a still picture for 
an extended period, the image might remain on the screen. 
However, it will disappear after a while.
•

 
Wall-hanging bracket (angled)  .................................................. TY-WK32TM1
•

  Wall-hanging bracket   ...............................................................TY-WK32TM2
•

  ATSC Tuner for Hospitality   .......................................................Enseo DTB1510 / Enseo DTB1510 TB
•

  Main Board (32")   ...................................................................... TNM4CD0819FA
•

  Main Board (37")   ......................................................................TNM4CD0819FB
•

  Power Board (32")   ....................................................................TNM4CD0821F
•

  Power Board (32"/37")   .............................................................TNM4CD0822F
•

  IR Board   ........................................................................\
...........TNM4CD0906F
•

  RS232 Board ........................................................................\
....TNM4CD0820F
•SW+AV3 Board (37")   ................................................................TNM4CD0807F
•

  Key Board (32")   ........................................................................\
TNM4CD0809F
•

  AV3 Board (32")   .......................................................................TNM4CD0810F
•

  SPEAKERS   ........................................................................\
......TTX4CM008C
Always be sure to ask a qualified technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard 
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being 
played with by young children, creating the potential risk of suffocation.
 To Prevent the Display From Falling
Required accessories:Holding Strip (1)AAssembly screw (1)
size: 4 mm x 10BWood screw (1)C
1.  Use  the  wood  screw  to  attach  the  holding  strip 
to the base table (C). 
Note: 
If the base table has no hole, align with the hole 
on  the  holding  strip  and  dig  one  on  the  base 
table. 
2. Screw the holding strip to the pedestal (B).
Note: 
Make sure that the holes on the holding strip are 
properly  aligned  with  the  pedestal  and  the  base 
table  to  ensure  stability  and  prevent  the  Display 
from falling down.
A
B
C 
						

							7
Safety Precautions / Maintenance
WARNING 
The  front  of  the  display  panel  has  been  specially  treated.  Wipe  the  panel  surface  gently  using  only  a  cleaning 
cloth or a soft, lint-free cloth.
•
  If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which 
neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface 
is dry.
•

  Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface may become 
damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise 
the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth. •
  If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added 
and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cl\
oth.
•

  Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside the 
unit, operating problems may result.
•

  Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet 
surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact 
with articles made from rubber or PVC.
Maintenance
 Setup
Do  not  place  the  Display  on  sloped  or  unstable 
surfaces.
•
  The Display may fall off or tip over.
Do not place any objects on top of the Display. •
  If  water  spills  onto  the  Display  or  foreign  objects  get 
inside it, a short-circuit may occur which could result in 
fire or electric shock. If any foreign objects get inside the 
Display, please consult an Authorized Service Center.
Do not cover the ventilation holes. •
  Doing so may cause the Display to overheat, which can 
cause fire or damage to the Display.
Transport only in upright position! •
  Transporting  the  unit  with  its  display  panel  facing 
upright or downward may cause damage to the internal 
circuitry.
When  using  the  pedestal,  leave  a  space  of  3 
15/16”  (10 
cm) or more at the top, left and right, and 2 
3/” (7 cm) 
or  more  at  the  rear,  and  also  keep  the  space  between 
the bottom of the display and the floor surface. If using 
some other setting-up method, follow the manual of it.  
(If there is no specific indication of installation dimension 
in  the  installation  manual,  leave  a  space  of  3 
15/16”  
(10 cm) or more at the top, bottom, left and right, and 2 
3/”  
(7 cm) or more at the rear.)
 AC Power Supply Cord
The Display is designed to operate on 110 - 127 V AC, 
50/60 Hz.
Securely insert the power cord plug as far as it will go.
•  If the plug is not fully inserted, heat may be generated 
which  could  cause  fire.  If  the  plug  is  damaged  or  the 
wall socket plate is loose, they should not be used. Do not handle the power cord plug with wet hands.
•
  Doing so may cause electric shocks.
Do not do anything that might damage the power cable. 
When  disconnecting  the  power  cable,  hold  the  plug, 
not the cable. •
  Do not make any modifications, place heavy objects on, 
place  near  hot  objects,  heat,  bend,  twist  or  forcefully 
pull  the  power  cable.  Doing  so  may  cause  damage  to 
the power cable which can cause fire or electric shock. 
If damage to the cable is suspected, have it repaired at 
an Authorized Service Center.
If the Display will not be used for a long period of time, 
unplug the power cord from the wall outlet.
 If problems occur during use
If a problem occurs (such as no picture or no sound), 
or if smoke or an abnormal odor is detected from the 
Display, unplug the power cord immediately. •
  Continuous  use  of  the  Display  under  these  conditions 
might  cause  fire  or  permanent  damage  to  the  unit. 
Have  the  Display  evaluated  at  an Authorized  Service 
Center.  Services  to  the  Display  by  any  unauthorized 
personnel  are  strongly  discouraged  due  to  its  high 
voltage dangerous nature.
If water or foreign objects get inside the Display, if the  
Display is dropped, or if the cabinet becomes damaged, 
disconnect the power cord plug immediately. •
  A  short  may  occur,  which  could  cause  fire.  Contact  an 
Authorized Service Center for any repairs that need to be 
made. 
						

							8
“AA” size
2.  
Insert batteries - note the correct polarity ( + and -).
Accessories
Accessories Supplied
Check that you have the Accessories and items shown
Operating Instruction bookRemote Control Transmitter
TNQ4CM051Batteries for the Remote Control 
Transmitter (AA Size × 2)
HDMI cable
(for TH-32LRT12U,
 TH-37LRT12U)
Close
Open
Hook
Requires two AA batteries.
 Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will\
 damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precautions:
1.

 Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2.  Do not combine a used battery with a new one.
3.  Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4.  Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5.  Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display.
6.  Do not burn or breakup batteries.
    Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
Remote Control Batteries
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline batteries for longer life.
1.  
Push the hook to release, then open the battery cover.
POWERINPUT
MUTE
RETURN
OFF TIMERRECALL ASPECTCH VOL
MENU
TNQ4CM051
DISPLAY 
						

							9
Preparation for Wall-hanging
Accessories
Before mounting the display on the wall, you must remove the pedestal from the display.
Follow the steps below:
1Disconnect all the cables from the display.
2Remove the pedestal.
A Remove the four screws.
B Pull out the pedestal.
Foam mat or thick 
soft cloth
WARNING
• Failure to use a Panasonic bracket or choosing to mount the unit yoursel\
f will be done at the risk of the consumer.
  Any damage resulting from not having a professional installer mount will\
 void your unit’s warranty.
• Always be sure to ask a qualified technician to carry out set-up.
  Incorrect fitting may cause equipment to fall, resulting in injury and p\
roduct damage.
• Do not mount this LCD display directly below ceiling lights (such as sp\
otlights, floodlights, or halogen lights) which 
typically give off high heat. Doing so may warp or damage plastic cabinet parts.
• To prevent foreign objects from entering the Display, place the enclosed sticker label on the lower area of the Display 
to cover  the holes. 
Place  the  display  at  a  comfortable  distance  for  viewing. Avoid  placing  it  where  sunlight  or  other  bright  light  (including 
reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent an internal component failure. Keep away from areas of excessive heat or 
moisture.
■How to use the pedestal
Adjust the stand to your desired angle.
The stand angle can be rotated 15 ° to the right / left.
Location
(View from above)
LCD panel side
15
°15°
B
A
A 
						

							10
Connections
Front side
Back sideAV connection (see page 11)
Component (YPbPr) connection 
(see page 11)
PC input terminals connection 
(see page 12)
Serial Terminals connection (see page 14) 
Audio out connection (see page 13) HDMI connection (see page 13)Lift door to open
AV connection (see page 11)