Panasonic Hdtv Projection Monitor Pt 47wx42 Operating Instructions

							®
®
HDTVProjectio nMonitor
Monito rde proyecció nde HDTV
Instruccione sde Operación 
						

							WARNING: To reduce the risk of electric shock do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance. The lightning flash with arrow
head within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WA R N I N G:  TO REDUCE THE RISK OF  FIRE OR ELECTRIC SHOCK, DO 
NOT EXPOSE THIS  APPARATUS TO RAIN OR MOISTURE. 
ANY CHANGES OR MODIFICATIONS TO THIS PTV 
RECEIVER NOT EXPRESSLY APPROVED BY
MATSUSHITA ELECTRIC CORPORATION OF AMERICA
COULD CAUSE HARMFUL INTERFERENCE, WHICH 
WOULD VOID THE USER’S AUTHORITY TO OPERATE
THIS EQUIPMENT.  FCC CAUTION:
THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER
COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS
MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL
CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION
PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS
INDUSTRIES ALLIANCE:  ENVIRONMENTAL NOTICE:
This product incorporates U.S. Patent  6,266,098 B1; Issue date: July 24, 2001; assigned 
to Matsushita Electric Corporation of America; other U.S. and foreign patents pending.
Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.
Copyright 2002 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law. 
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258 and 4482866.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
High Definition Sound 
						

							1 l
INFORMATION REGARDING CONVERGENCE
In the projection television, the image is formed by projecting 3 different color images (red, green and blue) onto the
projection screen. Convergence refers to the alignment of red, green and blue images on the projection screen.
When these images are properly aligned (converged), you see a sharp and vibrant color image. Sometimes, the three
images may require alignment. This is due to the effect of earth’s magnetic field on the projection tubes. Normally,
adjustment is not necessary after the initial alignment at the center of the screen. It is possible to correct the color fringing
on other areas of the screen by using the buttons on the remote control and by following the on-screen instructions in the
set-up menu. Please converge the images before using the television for the first time. The following diagram shows
examples of a misaligned image and a properly aligned image. Please refer to pages 35 and 36 for detailed procedure
on how to adjust convergence.
Misconverged image
Properly aligned image 
						

							2 l
TABLE OF CONTENTS
Table of Contents
Congratulations ......................................................... 3
Customer Record ...................................................................... 3
Care and Cleaning..................................................................... 3
Specifications ............................................................................ 3
Installation.................................................................. 4
Television Location .................................................................... 4
Optional Cable Connections ...................................................... 4
AC Power Supply Cord.............................................................. 4
Cable / Antenna Connection...................................................... 4
Care and Cleaning ..................................................... 5
Feature Comparison Chart ....................................... 6
Auto Set Up Menu...................................................... 7
Optional Equipment Connections  ........................... 8
VCR   ......................................................................................... 8
Cable Box .................................................................................. 9
VCR and Cable Box .................................................................. 9
Amplifier (TO AUDIO AMP) ..................................................... 10
Front Control Panel ................................................................. 10
Program Out (PROG OUT) ..................................................... 11
Digital TV - Set-Top Box (DTV-STB) or DVD Players ............. 11
Special Remote Buttons ......................................... 12
PIP and Split Operations ......................................... 13
Remote Control Operation (models PT-47WX42, 
PT-53WX42, and PT-56WX42 .............................. 16
Mode Operational Key Chart  .................................................. 17
Programming the Remote ....................................................... 19
Programming Without a Code ................................................. 19
Component Codes................................................................... 20
Remote Control Operation (models PT-47WX52, 
PT-53WX52, and PT-56WX52 .............................. 22
Mode Operational Key Chart  .................................................. 23
Programming the Remote ....................................................... 25
Programming Without a Code ................................................. 25
Component Codes................................................................... 27
Roller Guide Menu™ Navigation ............................ 30
Roller Guide Icons ................................................... 32
Roller Guide Icon Menus ......................................................... 32
Icon Menus Operation ............................................. 33
V-Chip Menu Operation........................................... 43
Troubleshooting Chart ............................................ 49
Limited Warranty ..................................................... 50
Customer Services Directory ................................. 52
Index ......................................................................... 53 
						

							CONGRATULATIONS
3 l
Congratulations
Your new HDTV Projection Monitor features state-of-the-art technology for high quality picture and sound with complete
audio/video connections for your home theater system. Your Projection TV is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the factory for best performance.
Customer Record
The model and serial number of this product are located on the back of the TV set. You should note the model and serial number
in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event of theft or loss.
Product registration for U.S. customers is available at:  www.prodreg.com/panasonic.
Model
Number
Serial
Number
Specifications
Specifications are subject to change without notice or obligation
Power Source
PT-47WX42 (4.2A)
PT-47WX52 (4.2A)
PT-53WX42 (4.2A)
PT-53WX52 (4.2A)
PT-56WX42 (4.2A)
PT-56WX52 (4.2A)
120V AC, 60Hz
Channel Capability - 181VHF-12; UHF-56; Cable-113
Video Input Jacks1Vp-p, 75 Ohm, Phono Jack Type
Audio Input Jacks500mV RMS 47K Ohm
Video Output Jack1Vp-p, 75 Ohm, Phono Jack Type
 Audio Output Jacks0-2.0V RMS 4.7K Ohm
Component Input (Y / PB / PR)75 Ohm, Phono Jack Type
 S-Video Input JacksS-Video (Y-C) Connector 
						

							4 l
INSTALLATION
Installation
Television Location
This unit can be used as an entertainment center.  Consult your dealer for available options.
rAvoid excessive sunlight or bright lights, including reflections.
rKeep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.
rFluorescent lighting may reduce remote control transmitting range.
rKeep away from magnetic equipment, including motors, fans and external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
rUse 75-ohm coaxial shielded cables.
rUse appropriate input and output connectors, that match your component connectors.
rAvoid long cables to minimize interference.
AC Power Supply Cord
CAUTION:  TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY
INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE. 
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT
PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company to ANT1 connection on back of television. Select cable
mode and ANT1 in SET UP menu under Prog Chan (Program Channels).
Note:A cable converter box may be required for proper reception. Check with your local cable company for
compatibility requirements.
Antenna Connections
• For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is
recommended.
•Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the
SET UP menu under Prog Chan.  
    
Polarized plug
75 Ohm VHF/UHF
on back of PTV
Incoming Cable from
Cable Company
Incoming Cable from
Home Antenna
  Cable Preset
Cable Mode is preset at the factory.
Antenna users must change to TV Mode and
ANT 1 in the Set Up menu. 
						

							CARE AND CLEANING
5 l
Care and Cleaning
Projection Screen (Turn set Off) (For Models PT-47WX52, PT-53WX52 and PT-56WX52)  
The projection screen is a high precision lens system which has a protective screen. The protective screen is fully
washable with the following precautions:
rUse a mild soap solution or window cleaner and a clean cloth.
• DO NOT USE ABRASIVE CLEANERS.
• Do not use laundry detergent or automatic dishwasher soap.
• Do not use alcohol, ammonia, or petroleum based products. 
rAvoid excessive moisture and wipe dry.
• Prevent solution from running into the receiver below.
rAvoid bumping or scraping the screen.
Note:Do not spray any type of cleaning fluid directly on the screen.
Projection Screen (Turn set Off) (For Models PT-47WX42, PT-53WX42 and PT-56WX42) 
The projection screen is a high precision lens system which does not attract dust.  
rOccasional dusting with a feather duster or very soft brush using only up and down motions.
• Never rub across the screen using a side to side motion.
rInfrequent washing with a very weak solution of dishwashing soap using a soft, lint-free clean cloth.
• DO NOT USE ABRASIVE CLEANERS.
• Do not use window or glass cleaner, laundry detergent, automatic dishwasher soap, or abrasive cleaners.
• Do not use alcohol, ammonia, or petroleum based products. 
rAvoid excessive moisture and wipe dry.
• Prevent solution from running into the receiver below.
rAvoid bumping or scraping the screen.
• Protect the very fine grooves on the screen which transport the picture.
Note:Do not spray any type of cleaning fluid directly on the screen.
Cabinet and Remote Control
rFor cabinets and remote control, use a soft cloth dampened with water or a mild detergent solution. Avoid excessive
moisture and wipe dry.
rDo not use benzene, thinner or other petroleum based products.  
						

							6 l
FEATURE COMPARISON CHART
Feature Comparison Chart 
MODELS
PT-47WX42
PT-47WX52
PT-53WX42
PT-53WX52
PT-56WX42
PT-56WX52
FEATURES
MENU LANGUAGE ENG/SPAN/FRrrrrrr
PROTECTIVE SCREENrrr
2 TUNER SPLITr r rrrr
2 TUNER PIPr r rrrr
VIDEO INPUT SKIPrrrrrr
CLOSED CAPTIONINGrrrrrr
V-CHIP CAPABILITY rrrrrr
DIGITAL SCAN RATE1080i,
480p1080i,
480p1080i,
480p1080i,
480p1080i,
480p1080i,
480p
NTSC LINE - DOUBLER480p480p 480p 480p480p480p
VIDEO NORMrrrrrr
AUDIO NORMrrrrrr
STEREOr    r    rrrr
AI SOUNDrrrrrr
BASS/BALANCE/TREBLEr    r    rrrr
SURROUNDrrrrrr
BBErrrrrr
A/V PROGRAM OUTrrrrrr
A/V IN (REAR/FRONT)4 (3/1)4 (3/1)4 (3/1)4 (3/1)4 (3/1)4 (3/1)
AUDIO OUTrrrrrr
S-VHS INPUT (REAR/FRONT)2/12/12/12/12/12/1
COMPONENT INPUT   2   2  2  2  2  2
IMPORTANT INFORMATION REGARDING THE USE OF VIDEO GAMES, COMPUTERS, OR
OTHER FIXED IMAGE DISPLAYS.
WARNING: The marking or retained image on the picture tube resulting from viewing fixed
image is not an operating defect and as such is not covered by Warranty. 
The projection television is designed to display constantly moving images on the screen.
Continuous viewing of stationary images such as letterbox pictures on standard screen TVs (with
top/bottom bars), non-expanded standard (4:3) pictures on wide screen TVs (with side bars shown
on each side of an image), stock market report bars (ticker running at the bottom of the screen),
video game patterns, fixed scoreboards, bright station logos, on-line (internet) or repetitive computer
style patterns should be limited.
The extended use of fixed image program material can cause a permanent picture tube damage,
shown as a “shadow image” viewable on normal programs. This type of irreversible picture tube
deterioration can be limited by performing the following steps:
• Limit the display of fixed image program material to no more than 15% of total viewing time per week.
• Turn the power off when not in use.
 A/V 
JACKS
AUDIO
  SPECIAL 
FEATURES 
						

							AUTO SET UP MENU
7 l
Auto Set Up Menu
For your convenience, Auto Set up menu will be displayed on screen when the set is turned on for the first time. If needed, 
follow the menus and procedures for setting up the features. 
rIDIOMA/LANGUE - To change menu language to ENGLISH, SPANISH or FRENCH.
rMODE - To select TV (antenna) or CABLE mode depending on the signal source.
rAUTO PROGRAM - To automatically program all channels with a signal.  
rCONVERGENCE -To adjust the center convergence, if needed.    rPress  VOLu to select English, Spanish or French.
IDIOMA/LANGUE
CONVERGENCEENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
uu
u
AUTO SET UP
rPress  VOLu to select TV or CABLE.IDIOMA/LANGUE
CONVERGENCEENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
uu
u
AUTO SET UP
rPress  VOLu to start Auto Programming.IDIOMA/LANGUE
CONVERGENCEENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
uu
u
AUTO SET UP
rPress  VOLu to display Convergence adjustment menu.
Note:Refer to page 35 for setting Convergence, if needed.
IDIOMA/LANGUE
CONVERGENCEENGLISH
CABLE MODE
AUTO PROGRAM
PRESS ACTION TO EXITu
uu
u
AUTO SET UP 
						

							8 l
OPTIONAL EQUIPMENT CONNECTIONS
Optional Equipment Connections
VCR Connection 
Follow this diagram when connecting your television to a VCR only.
 
Note:The remote control must be programmed with supplied codes to operate the VCR. 
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Viewing a video
Procedure
rOption A
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3.  Begin the video.
rOption B
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television program
Procedure
rOption A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
rOption B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the television program you want to view. 
VCR
CABLES NOT SUPPLIEDCONNECTIONS ON BACK OF THE PTV
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT12
AUDIO
   VIDEO INPUTS
L
R AUDIO OUTVIDEO OUT
ANT IN ANT OUT 
Incoming 
Cable
Use either the
S-Video or Video
connection.