Panasonic Hdd Viewer Wj Nd200 Operating Instructions

							Print the Displayed
Paused Playback Image
(page 19)
Play recorded images
on the removal hard
disk drive (page 13)
Select the connected
removal hard disk drive
(page 12)
Check the Removal
Hard Disk Drive 
(page 20)
Seach and Play Record-
ing Event (page 15)Save the Displayed
Paused Playback Image
(page 18)
11
Operations Flow 
						

							12
Select the connected removal hard disk drive
Screenshot 1
Start operation from the operation window displayed just
after this software is started.
Step 1
Click the [HDD select] button.
Screenshot 2
The Browse for Folder window will be displayed.
Step 2
Click the [HDD select] button, and then select the
removal hard disk drive connected with the PC dis-
played as Local Disk (*:) under My Computer.
Note:
* varies depending on the system configuration of
the PC.
→The path of the selected removable hard disk drive
will be displayed in the HDD path display area on
the tool bar. 
						

							13
Play recorded images on the removal hard disk drive
Screenshot 1
Start operation from the operation window after select-
ing the connected removable hard disk drive.
Step 1
Click the [PLAY] button.
→Playback of recorded images will start.  will be
displayed in the status display area.
Notes:
•The pointer on the slider will indicate the current
playback point.
•When playback is started by selecting a recording
event listed in the search result, the selected record-
ing event in the search result list will remain selected
even when playback of the next recording event
starts. (The recording event currently being played
will not be highlighted in the search result list if it is
not the selected recording event from the search
result list.)
Descriptions of the playback operation buttons
REV PLAY
Pausing
Frame play/reverse
frame play•Reverse playback will start.
•Playback will be stopped when this button is clicked during
playback.
•The frame display and the reverse frame display are available
only during playback or pause.
•When the [NEXT IMAGE] button is clicked, the next frame is
played and paused.
•When the [PREV IMAGE] button is clicked, the previous frame
is played and paused.
Note:
When the image currently being played is in MPEG-4 format,
some frames of recorded images will not be displayed.
Reverse frame play will be performed with the set refresh
interval of the camera. 
						

							14
Fast playback/fast
reverse playback•Playback speed will be changed in the following order each
time the [FF] button is clicked: Step2 (Approx. 4x) →Step3
(Approx. 8x) →Step4 (Approx. 16x) →
Step5 (Approx. 32x) →Step6 (Approx. 48x) →
Step7 (Approx. 96x)
•Reverse playback speed will be changed in the following
order each time the [REW] button is clicked: 
Step2 (Approx. 4x) →Step3 (Approx. 8x) →
Step4 (Approx. 16x) →Step5 (Approx. 32x) →
Step6 (Approx. 48x) →Step7 (Approx. 96x)
•When the [PLAY] button or the [REV PLAY] button is clicked
during fast playback/fast reverse playback, playback speed
will return to the normal playback speed.
Note:
When the image currently being played is in MPEG-4 format,
some frames of recorded images will not be displayed.
Fast playback/fast reverse playback will be performed with the
set refresh interval of the camera.
Skip/reverse skip
Slider•When the [NEXT RECORD] button is clicked, playback is
skipped to the recorded image of the next event.
•When the [PREV RECORD] button is clicked, playback is
skipped to the recorded image of the previous event.
•When there is no recorded image to be skipped to, the current
playback will continue, but the playback may start from a point
around a minute before the last playback point.
•The current playback point will be indicated by the pointer on
the slider. It is possible to move the playback point to the
desired point by moving the pointer during playback. (The
playback image at the moved point will be paused.)
Click the [PLAY] button to start playback from the moved
point. 
						

							15
Search and Play Recording Event
Search for a recording event and play it (recording event search).
Recording events can be searched by filtering as follows.
About filtering
Conditions for  How to search
filtering
DATE Designate a time period and search images recorded in the designated period to play.
Event Searches for images from the selected recording mode only. The following recording modes
can be selected.
Manual: Manual recording (Operating instructions (PDF))
Schedule: Schedule recording (Setup instructions (PDF))
Emergency: Emergency recording (Setup instructions (PDF))
Site alarm: Recording at a site alarm occurrence (Operating instructions (PDF))
Terminal alarm: Recording at a terminal alarm occurrence (Operating instructions (PDF))
Command alarm: Recording at a command alarm occurrence (Operating instructions
(PDF))
SD memory: SD memory data (Setup instructions (PDF))
Camera Searches for images from the selected camera channel.
About displaying the recording event list window
Number of the listed dataNumber of the listed data:The total number of the list-
ed data will be displayed.
[All List] button:Cancels filtering and lists all recording
events.
[Prev Page] button:Displays the previous page of the
list.
[Next Page] button:Displays the next page of the list.
Time & Date:Start time of recording will be displayed.
CH:A camera channel currently used for recording will
be displayed. Recorded images of the displayed
camera channel will be played on a single screen.
REC:Recording mode will be displayed.
MAN:Manual Recording
SCH:Schedule recording
EMR:Emergency recording
TRM:Recording at a terminal alarm occurrence
COM:Recording at a command alarm occurrence
CAM:Site alarm
PRE:Pre-event recording
SD:SD memory data
Note:
When the [All List] button is clicked during playback,
playback will stop and the filtering will be canceled. 
						

							16
How to operate
Screenshot 1
Click the [Search] button. The REC Event Search win-
dow is displayed.
Step 1
Select searching conditions.
Time & Date
Filter by time and date. Select a start time and an end
time by clicking the [i] button.
REC Events
Filter by recording event. Check the radio button of the
desired recording event to be displayed when filtering
by recording events.
Camera
Filter by camera channel. Check the radio button of the
desired camera channel to be searched for.
Step 2
Click the [OK] button.
→will be displayed in the status display area,
and then the filtered result will be displayed.
Note:
Click the [All List] button to cancel the filtering.
will go off and all recording events will be
listed. 
						

							17
Screenshot 2
The search results (recording event list) will be dis-
played.
Step 3
Click the time of the desired recording event.
→Play a recorded image of the recording event from
the selected time.
Note:
Playback of SD memory data
When a recorded image of the recording event con-
tains not many frames to play smoothly, a black
screen may be displayed or it may take time to
refresh images. In this case, display the image with
frame playback/reverse frame playback. 
						

							18
Save the Displayed Paused Playback Image
Saving the displayed image as a jpeg file (extension: jpg) is available only when the image is paused.
Screenshot 1
Start operation when playing the images.
Step 1
Click the [PAUSE] button.
Step 2
Click the [Save] button.
Screenshot 2
The Save As window will be displayed.
Step 3
Enter the file name and select JPG (*.jpg) for Save as
type.
Step 4
Designate the folder and click the [Save] button.
→The image data will be saved. 
						

							19
Print the Displayed Paused Playback Image
Print the paused image as follows.
Screenshot 1
Start operation when playing the images.
Step 1
Click the [PAUSE] button.
Step 2
Click the [Print] button. 
						

							20
Check the Removal Hard Disk Drive
When it is necessary to check the removable hard disk drive, do as follows.
When the removable hard disk drive is to be removed and stored for a long time, check it using this function on a
monthly basis as maintenance.
Screenshot 1
Start operation from the operation window after select-
ing the connected removable hard disk drive.
Step 1
Click the [HDD check] button.
Screenshot 2
The confirmation window will be displayed.
Step 2
Click the [OK] button.
→The HDD check will start.
Important:
•It will take for around 2 hours to complete the HDD
check if the disk size is 120 GB.
•When an error occurs during the HDD check, the
error notification window will be displayed and the
HDD check will stop. In this case, contact your deal-
er.
•Do not disconnect the removable hard disk drive
during the HDD check. When the hard disk drive is
removed in the process of the HDD check, the hard
disk may be damaged or an error may occur in the
PC. When an error occurred in the PC, reboot the
PC.