Panasonic Hdc Sdx1 Operating Instructions

							81VQT2W55
∫Playback time setting
Touch the playback time.≥The playback time of [AUTO] is a maximum of 
approx. 5 minutes.
≥ Playback time may become shorter than the setting, 
or it may not even play back if the part recognized as 
clearly recorded is short.
∫ Date setting
Touch the playback date.
∫Music setting
1 Touch your favorite music.≥When [NO MUSIC] is selected, the audio recorded at 
the time of shooting is played back.
≥ To adjust the volume of music during playback or 
audio testing, operate the volume lever or the adjust 
zoom buttons. ( l37)
2 Touch [ENTER].
To test the music audio
Touch [START].
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
HDCSDX1_eng.book  81 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							82VQT2W55
1Touch .
2Touch the desired item.
3(When [DATE SETUP] is selected)
Touch the playback date.
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
(When [MUSIC SELECT] is selected)
Touch the desired sound.
≥To adjust the volume of music during playback of the 
slide show or audio testing, operate the volume lever 
or the adjust zoom buttons. ( l37)
≥ Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
4Touch [START].
5Select the playback operation. ( l35)
≥When the playback is finished or stopped, the screen to select [REPLAY], 
[SELECT AGAIN] or [EXIT] is displayed.Touch the desired item.
Changing the playback setting and playing back the 
slide show
[DATE SETUP]: Select the date to be played back.
[SLIDE INTERVAL]: Selects the interval between still pictures at playback.
[MUSIC SELECT]: Select the music to be played on playback
[SHORT]: Approx. 1 second
[NORMAL]: Approx. 5 seconds
[LONG]: Approx. 15 seconds
HDCSDX1_eng.book  82 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							83VQT2W55
Advanced
Editing
1
Deleting scenes/still 
pictures
¬Change the mode to   and touch the play mode select icon to select 
[SD CARD]/[AVCHD], [SD CARD]/[MP4]  or [SD CARD]/[PICTURE]. (l35)
∫ Deleting multiple scenes/still pictures from the thumbnail display
1Press the  /LIGHT button while the thumbnail view screen is 
displayed.
2Touch [ALL SCENES] or [SELECT].
≥When [ALL SCENES] is selected, all the scenes or 
still pictures on the media will be deleted.
(In case of playing back scenes or still pictures by 
date, all the scenes or still pictures on the selected 
date will be deleted.)
≥ Protected scenes/still pictures cannot be deleted.
3(When [SELECT] is selected in step 2)
Touch the scene/still picture to be deleted.
≥When touched, the scene/still picture is selected and the   indication appears on the 
thumbnail. Touch the scene/still pict ure again to cancel the operation.
≥ Up to 99 scenes can be selected to be deleted.
4(When [SELECT] is selected in step 2)
Touch [Delete] or press the  /LIGHT button.≥To continuously delete other scenes/still pictures, repeat steps 3-4.
When you stop deleting halfwayTouch [CANCEL] or press the MENU button while deleting.
≥The scenes or still pictures that have already been deleted when the deletion is canceled 
cannot be restored.
Deleted scenes/still pictures cannot be restored, so perform appropriate 
confirmation of the contents before proceeding with deletion.
To delete by confirming images 
being played back
Press the   /LIGHT button while 
scenes or still pictures to be deleted are 
being played back.
HDCSDX1_eng.book  83 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							84VQT2W55
To complete editingPress the MENU button.
≥You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE]  # 
[DELETE]  # [ALL SCENES] or [SELECT].
≥ You can also delete still pictures by pressing the MENU button, selecting [PICT. SETUP]  # 
[DELETE]  # [ALL SCENES] or [SELECT].
≥ During Face Highlight Playback, Highlight Playback, Intelligent Scene Selection, or Disc 
Playback when connected to a DVD burner (optional), scenes/still pictures cannot be 
deleted.
≥ Scenes/still pictures which cannot be played back (the thumbnails are displayed as  ) 
cannot be deleted.
≥ In case of [ALL SCENES], the deletion may take time if there are many scenes or still 
pictures.
≥ If you delete scenes recorded on other products or still pictures conforming to DCF 
standard with this unit, all the data related to the scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by other products are deleted, a still picture 
(other than JPEG) that cannot be played back on this unit may be erased.
To delete unnecessary parts from AVCHD scenes, perform the deletion after dividing the 
scenes.
≥ Change the mode to   and touch the play mode select icon to select [SD CARD]/
[AVCHD]. (l 35)
1Select the menu.
2Touch the scene to be divided.
3Touch   to set the dividing point.≥Using slow-motion playback or frame-by-frame 
playback makes it easy to search for the point where 
you want to divide the scene. ( l74)
≥ Touch [YES] to continue dividing the same scene. To 
continue dividing other scenes, touch [NO] and 
repeat steps 2-3.
4Press the MENU button to complete dividing.
5Delete the unnecessary scene. (l 83)
Dividing a scene to partially delete (AVCHD)
: [EDIT SCENE] # [DIVIDE]  # [SET]
0h00m00s 0h00m00s
0h00m00s
HDCSDX1_eng.book  84 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							85VQT2W55
To delete all the divided points
≥The scenes that were deleted after division cannot be recovered.
≥You cannot divide a scene if you are playing back a disc with a DVD burner (optional) 
connected, or if the number of scenes of a given date would exceed 99 scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided 
points cannot be deleted.
≥ If personal information in the divided scenes is deleted, the personal information is deleted 
when the divided scenes are canceled.
Divide the MP4 scene, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
≥ Change the mode to   and touch the play mode select icon to select [SD CARD]/
[MP4]. (l 35)
1Select the menu.
2Touch the scene to be divided.
3Touch   to set the dividing point.≥Using slow-motion playback or frame-by-frame 
playback makes it easy to search for the point where 
you want to divide the scene. ( l74)
4Touch the part for deletion.
5Touch [YES] and confirm (playback) the 
part for deletion.
≥A confirmation message appears when [NO] is 
touched or playback is canceled.
6Touch [YES].≥To continue dividing other scenes, repeat steps 2-6.
≥ Press the MENU button to complete dividing.
≥ The scenes that were deleted after division cannot be recovered.
≥It may not be possible to divide scenes with a short recording time.
≥ The actual division may slightly slip off the previously designated dividing point.
[DIVIDE] 
# [CANCEL ALL]
Dividing a scene to partially delete (MP4)
: [EDIT SCENE]  # [SPLIT&DELETE]
0h00m00s 0h00m00s
0h00m00s
HDCSDX1_eng.book  85 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							86VQT2W55
Delete personal information from the AVCHD scene for which faces were recognized.
≥Change the mode to   and touch the play mode select icon to select 
[SD CARD]/[AVCHD]. (l 35)≥Personal information is not recorded in the MP4 scenes.
1Select the menu.
2Touch the desired scenes with personal information to be deleted.≥  appears at scenes for which faces were recognized. Touch one of the scenes where 
 appears.
≥  will change to  (red) when touched. Touch the  (red) again to cancel the 
operation.
≥ Up to 99 scenes can be selected in succession.
3Touch [Delete].≥To continuously delete other personal information, repeat steps 2-3.
≥ Press the MENU button to complete the settings.
When you stop deleting halfwayTouch [CANCEL] or press the MENU button while deleting personal information.
≥ The personal information that has already  been deleted when the deletion is canceled 
cannot be restored.
≥ During Disc Playback when connected to a DVD burner (optional), scenes/still pictures 
cannot be deleted.
Deleting personal information
: [VIDEO SETUP]  # [DELETE PERSONAL INFO]
HDCSDX1_eng.book  86 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							87VQT2W55
Scenes/still pictures can be protected so that they are not deleted by mistake.
(Even if you protect some scenes/still pictures, formatting the media will delete them.)
≥ Change the mode to  .
1Select the menu.
2Touch the scene/still picture to be protected.≥When touched, the scene/still picture is selected and the   indication appears on the 
thumbnail. Touch the scene/still pict ure again to cancel the operation.
≥ Press the MENU button to complete the settings.
≥When the disc playback is selected while a DVD burner (optional) is connected, scenes/
still pictures cannot be protected.
Protecting scenes/still pictures
: [VIDEO SETUP] or [PICT. SETUP]  # [SCENE PROTECT]
HDCSDX1_eng.book  87 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							88VQT2W55
Advanced
Editing
2
DPOF setting
You can write the data selecting still pictures to be printed and the number of prints (DPOF 
data) onto the SD card.
¬Change the mode to   and touch the play mode select icon to select 
[SD CARD]/[PICTURE]. ( l35)
∫ What is DPOF?
DPOF (Digital Print Order Format) is a format  which allows the user of a digital camera to 
define which captured images on the SD card are to be printed, together with information on 
the number of copies they wish to print. (Please note: Not all commercial printing services 
support this feature at this time.)
1Select the menu.
2Touch the still picture to be set.
3Touch  /  to set the number of 
prints.
≥ Up to 999 prints can be selected. (Prints for set 
number can be printed with a printer that supports 
DPOF.)
≥ To cancel the setting, set the number of prints to [0].
4Touch [ENTER].
≥To continuously set other still pictures, repeat steps 2-4.
≥ Press the MENU button to complete the settings.
To cancel all DPOF settings
≥When the disc playback is selected while a DVD burner (optional) is connected, scenes/
still pictures cannot be set DPOF.
≥ You cannot add the recording date to pictures to be printed with the DPOF settings. : [PICT. SETUP] 
# [DPOF SET] # [SET]
[DPOF SET]  # [CANCEL ALL]
HDCSDX1_eng.book  88 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							89VQT2W55
Advanced
With a TV
1
Watching Video/Pictures 
on your TV
≥Use the supplied AV multi cable. Check the output settings when connecting the 
component terminal or the video terminal with the AV multi cable. ( l92)
≥ Use of the following Panasonic HDMI mini cables is recommended to connect the unit to 
the HDMI terminal.
≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high 
definition TV and then play back the recorded high definition images, you can enjoy them 
in high resolution with high quality sound.
1Connect this unit to a TV.
Confirm the terminals on your TV and use a cable compatible with the terminals. 
Image quality may vary with the connected terminals.
1 High quality
2 HDMI terminal
3 Component terminal
4 Video terminal
AV MULTI
AV MULTI
AHDMI mini cable (optional)
≥ Be sure to connect to the HDMI 
terminal.
B AV multi cable (supplied)
Picture quality
1 High definition images when 
connecting to HDMI terminal
2 High definition images when 
connecting to component 
terminal compatible with 
1080i
Standard images when 
connecting to component 
terminal compatible with 480i
3 Standard images when 
connecting to video terminal
HDCSDX1_eng.book  89 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							90VQT2W55
≥Check that the plugs are inserted as far as they go.
≥ Always use a genuine Panasonic HDMI mini  cable (RP-CDHM15, RP-CDHM30; optional).
≥ Do not use any other AV multi cables except the supplied one.
≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable 
is not required.
≥ When connecting to the AV terminal of the TV, do not connect the component terminal plug 
of the AV multi cable. Image may not display when the component terminal plug is 
connected simultaneously.
2Select the video input on the TV.≥Example:
Select the [HDMI] channel with a HDMI mini cable.
Select the [Component] or [Video 2] channel with an AV multi cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the TV. (For more 
information, please read the operating instructions for the TV.)
3Change the mode to   to play back.
CablesReference items
A HDMI mini cable (optional) ≥Connecting with a HDMI mini cable ( l92)
≥ Playback using VIERA Link
™ (HDAVI Control™) 
( l 93)
B AV multi cable (supplied) ≥Connecting with the AV multi cable ( l92)
HDCSDX1_eng.book  90 ページ  ２０１０年６月１１日　金曜日　午前９時２７分