Panasonic Hdc Sdx1 Operating Instructions

							121VQT2W55
If faulty management information is found, the messages may appear and a repair is 
performed. (Repairing may take time depending on the error.)
≥The above message is displayed when abnormal management information is detected 
when the scenes are displayed in thumbnail. To perform the repair, touch the scene with 
 in the thumbnail, and start the playback. Please be aware that if the repair fails, 
scenes with   will be deleted.
≥ Use a sufficiently charged battery or the AC adaptor.
≥ Depending on the condition of the data, it may not be possible to completely repair the 
data.
≥ When data recorded on another device is recovered, it may not be possible to play back 
the data on this unit or the other device.
≥ If recovery fails, turn the unit off and on again after waiting a while. If recovery fails 
repeatedly, format a media on the unit. Please be aware that if a media is formatted, then 
all the data recorded on the media will be erased.
≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.
About recovery
SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED. 
(IRREPARABLE SCENES WILL BE DELETED.)
HDCSDX1_eng.book  121 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							122VQT2W55
Others
Troubleshooting
ProblemCheck points
This unit cannot be 
turned on.
This unit does not stay 
on long enough.
Battery runs down 
quickly. ≥
Charge the battery again to ensure it is sufficiently 
charged. ( l20)
≥ In cold places, the battery using time becomes 
shorter.
≥ The battery has a limited life. If the operating time is 
still too short even after the battery is fully charged, 
the battery has worn out and needs to be replaced.
This unit is turned off 
automatically. ≥
If the unit turns off when you turn off the power to the 
TV using the TV remote control, the VIERA Link is at 
work. If you are not using the VIERA Link, set 
[VIERA Link] to [OFF]. ( l93)
≥ When this unit is connected to a DVD burner to copy 
or play back images (a disc is being accessed), the 
unit turns off automatically if the Mini AB USB 
Connection Cable is removed.
A clicking sound is 
heard when the unit is 
shaken. ≥
This is the sound of the lens moving and is not a 
defect.
This sound will no longer be heard when the unit is 
turned on and change the mode to   or  .
Remaining battery 
indication is not 
displayed properly. ≥
The remaining battery capacity indication is an 
approximation.
If the remaining battery capacity indication is not 
displayed correctly, fully charge the battery, 
discharge it and then charge it again.
This unit cannot be 
operated though it is 
turned on.
This unit does not 
operate normally. ≥
Remove the battery or AC adaptor, wait about 
1 minute and then reconnect the battery or AC 
adaptor. Then about 1 minute later, turn on the unit 
again. (Conducting the above operation while the 
media is being accessed may damage the data on 
the media.)
≥ If normal operation is still not restored, detach the 
power connected, and contact consumer support.
(l 145)
HDCSDX1_eng.book  122 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							123VQT2W55
ProblemCheck points
Item other than the 
touched one is 
selected. ≥
Calibrate the touch screen. ( l44)
The remaining time 
indication or the 
elapsed time 
indication is not 
shown. ≥
[DISPLAY] of the [SETUP] is [OFF]. ( l40)
The unit arbitrarily 
stops recording. ≥
Use an SD card that can be used for motion picture 
recording. ( l22)
≥ The recordable time may have shortened due to the 
deterioration of the data writing speed or repeated 
recording and deletion. Using the unit, format the SD 
card. ( l44)
≥ If [AGS] is [ON], record in the normal horizontal 
position or set [AGS] to [OFF]. ( l62)
Auto focus function 
does not work. ≥
Switch to Intelligent Auto Mode.
≥ If you are trying to record a scene which is hard to 
bring into focus in Auto Focus Mode, use the Manual 
Focus Mode to adjust the focus. ( l34, 73)
“ENVIRONMENT TOO 
DARK, OR LENS 
COVER CLOSED.” is 
displayed. ≥
Before turning on the unit, open the lens cover.
≥ This message may also be displayed when recording 
in a very dark location.
Color balance of 
images is strange 
when recording in a 
place such as a 
gymnasium. ≥
In a place with multiple light sources, such as a 
gymnasium or a hall, set the white balance setting to 
 (Indoor mode 2). If you cannot record clearly 
with the   (Indoor mode 2), set it to   (Manual 
adjustment mode). ( l71)
Any scenes/still 
pictures cannot be 
played back. ≥
Any scenes/still pictures where the thumbnails are 
displayed as   cannot be played back.
HDCSDX1_eng.book  123 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							124VQT2W55
Although this unit is 
correctly connected to 
a TV, images cannot 
be seen.
The images are 
squeezed horizontally.≥
Please read the operating instructions of your TV and 
select the channel that matches the input used for 
the connection.
≥ Change the [TV ASPECT] setting to match the 
aspect ratio of the TV. ( l91)
≥ Change the setting of the unit depending on the 
cable connecting to the TV. (l 92)
Scenes cannot be 
deleted. ≥
Release the protect setting. ( l87)
≥ Any scenes/still pictures where the thumbnails are 
displayed as   cannot be deleted. If the scenes/
still pictures are unnecessary, format the media to 
erase the data. ( l44) Please be aware that if a 
media is formatted then all the data recorded on the 
media is erased and cannot be recovered. Back up 
important data on a PC, disc etc.
If the SD card is 
inserted in this unit, it 
is not recognized. ≥
If the SD card is formatted on a PC, it may not be 
recognized by this unit. Use this unit to format SD 
cards. ( l44)
If the SD card is 
inserted in another 
device, it is not 
recognized. ≥
Check that the device is co mpatible with the capacity 
or type of SD card (SD Memory Card/SDHC Memory 
Card/SDXC Memory Card) that you inserted. Refer 
to the operating instructions of the device for details.
Color or brightness of 
the image changes, or 
you may see 
horizontal bars in the 
image.
The LCD monitor 
flickers indoors. ≥
Color or brightness of the image may change, or you 
may see horizontal bars in the image when the object 
is recorded under fluorescent light, mercury light or 
sodium light, etc., but this is not a malfunction.
≥ In Motion Picture Recording Mode, record in 
Intelligent Auto Mode or set the shutter speed to 1/60 
in areas where the power supply frequency is 60 Hz, 
or 1/100 in areas of 50 Hz.
≥ In Still Picture Recording Mode, this will not affect the 
recorded image.
Object seems to be 
warped. ≥
Object seems to be warped slightly when the object 
moves across the image very fast, but this is 
because the unit is using MOS for the image sensor. 
This is not a malfunction.
ProblemCheck points
HDCSDX1_eng.book  124 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							125VQT2W55
White round spots like 
soap bubbles appear 
on the recorded 
picture.≥
If you take a picture with the 
flash in a dark place or 
indoors, white round spots 
may appear on the picture 
caused by the flash 
reflecting of particles of dust in the air. This is not a 
malfunction.
A characteristic of this is that the number of round 
spots and their position differ in every picture.
“ERROR OCCURRED. 
PLEASE TURN UNIT 
OFF, THEN TURN ON 
AGAIN.” is displayed. ≥
The unit has automatically detected an error. Restart 
the unit by turning off and on.
≥ The unit will be turned off in about 1 minute if the unit 
is not turned off and on.
≥ Repair is needed if it is repeatedly displayed even if it 
is restarted. Detach the power connected, contact 
consumer support. ( l145) Do not attempt to repair 
the unit by yourself.
VIERA Link does not 
work. [Setting on this unit]
≥
Connect with a HDMI mini cable (optional). ( l93)
≥ Press the MENU button, then touch [SETUP]  # 
[VIERA Link]  # [ON]. ( l93)
≥ Turn the unit off and then back on again.
[Setting on other devices]
≥ If the TV input does not switch automatically, switch 
the input using the TV remote control.
≥ Check the VIERA Link setting on the connected 
device.
≥ Please refer to the operating instructions of the 
connected device.
When connected by 
the USB cable, this 
unit is not detected by 
the PC. ≥
After re-inserting the SD card into the unit, reconnect 
the supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. ( l105, 114, 115)
≥ Connect the supplied USB cable again after 
restarting the PC and turning on this unit again.
ProblemCheck points
HDCSDX1_eng.book  125 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							126VQT2W55
When the USB cable is 
disconnected, an error 
message will appear 
on the PC.≥
To disconnect the USB cable safely, double-click the 
 icon in the task tray and follow the instructions 
on the screen.
The power of the DVD 
burner cannot be 
turned on. ≥
When the unit is connected to the DVD burner, use 
the respective AC adaptors for both this unit and the 
DVD burner.
Cannot see the PDF 
operating instructions 
for HD Writer AE 2.6 X. ≥
You will need Adobe Acrobat Reader 5.0 or later or 
Adobe Reader 7.0 or later to read the PDF operating 
instructions for HD Writer AE 2.6 X.
Cannot copy scenes 
on the SD card by 
connecting to other 
equipment with the 
USB cable. ≥
Other equipment might have not recognized the SD 
card. Unplug the USB cable once, and reconnect it.
Cannot import AVCHD 
scenes with iMovie’09. ≥
You may not be able to import AVCHD scenes with 
iMovie’09 when both AVCHD scenes and MP4 
scenes (included iFrame) are recorded on a single 
SD card. In such a case, first copy all the MP4 
scenes data (included iFrame) to iMovie’09, delete all 
the MP4 scenes data on the SD card, and then 
import the AVCHD scenes with iMovie’09.
When using Skype, 
the image/audio is cut 
off. ≥
Reconnect the USB cable after shutting down Skype, 
and connect to Skype again.
ProblemCheck points
HDCSDX1_eng.book  126 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							127VQT2W55
∫If scenes do not change smoothly when played back on another 
device (AVCHD)
The images may be still for several seconds at  the joins between the scenes if the following 
operations are performed when multiple scenes have been continuously played back using 
another unit.
≥ Just how smoothly the scenes will be play ed back depends on the playback unit. 
Depending on the unit used, the images may stop moving and become still for a moment 
even when none of the following conditions are applicable.
≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at 
every 4 GB of data when played back with another device.
≥ It may not play back smoothly when the editing of scenes was done with the HD Writer AE 
2.6X , but it will play back smoothly if you set t he seamless settings in the HD Writer AE 
2.6X . Refer to the operating instructions for the HD Writer AE 2.6 X.
Principal reasons for not playing back smoothly
≥ When the scenes were recorded on different dates
≥ When scenes lasting under 3 seconds have been recorded
≥ When PRE-REC was used for recording
≥ When deleting scenes
≥ When selected scenes are copied to a disc in a connected DVD burner
≥ When scenes recorded with more than 99 scenes on the same date
HDCSDX1_eng.book  127 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							128VQT2W55
Others
Cautions for use
The unit and the SD card become warm 
during use. This is not a malfunction.
Keep this unit as far away as possible 
from electromagnetic equipment (such 
as microwave ovens, TVs, video games 
etc.).
≥If you use this unit on top of or near a TV, 
the pictures and/or sound on this unit may 
be disrupted by electromagnetic wave 
radiation.
≥ Do not use this unit near cell phones 
because doing so may result in noise 
adversely affecting the pictures and/or 
sound.
≥ Recorded data may be damaged, or 
pictures may be distorted, by strong 
magnetic fields created by speakers or 
large motors.
≥ Electromagnetic wave radiation generated 
by microprocessors may adversely affect 
this unit, disturbing the pictures and/or 
sound.
≥ If this unit is adversely affected by 
electromagnetic equipment and stops 
functioning properly, turn this unit off and 
remove the battery or disconnect AC 
adaptor. Then reinsert the battery or 
reconnect AC adaptor and turn this unit 
on.
Do not use this unit near radio 
transmitters or high-voltage lines.
≥ If you record near radio transmitters or 
high-voltage lines, the recorded pictures 
and/or sound may be adversely affected. Make sure to use the supplied cords and 
cables. If you use optional accessories, 
use the cords and the cables supplied 
with them.
Do not extend the cords and the cables.
Do not spray insecticides or volatile 
chemicals onto the unit.
≥
If the unit is sprayed with such chemicals, 
its body may be marred and the surface 
finish may peel off.
≥ Do not leave rubber or plastic products in 
contact with the unit for a long time.
When you use the unit in a sandy or 
dusty place such as a beach, do not let 
sand or fine dust get into the body and 
terminals of the unit.
Also, keep the unit away from sea water.
≥ Sand or dust may damage the unit. (Care 
should be taken when inserting and 
removing a card.)
≥ If sea water splashes onto the unit, wipe 
off the water with a well wrung cloth. Then 
wipe the unit again with a dry cloth.
When carrying the unit, do not drop or 
bump it.
≥ A strong impact can break the unit’s 
casing, causing it to malfunction.
Cleaning
≥ Before cleaning, detach the battery or pull 
the AC cable from the AC outlet, and then 
wipe the unit with a soft, dry cloth.
≥ If the unit is very dirty, dip a cloth in water 
and squeeze firmly, and then wipe the unit 
with the damp cloth. Next, dry the unit with 
a dry cloth.
≥ Use of benzine, paint thinner, alcohol, or 
dishwashing liquid may alter the camera 
body or peel the surface finish. Do not use 
these solvents.
≥ When using a chemical dust cloth, follow 
the instructions that came with the cloth.
About this unit
HDCSDX1_eng.book  128 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							129VQT2W55
Do not use the unit for surveillance 
purposes or other business uses.
≥This unit was designed for consumer 
intermittent use. It was not intended for 
continuous use, or for any industrial or 
commercial application resulting in 
prolonged use.
≥ In certain situations, continuous use could 
cause the unit to overheat and cause a 
malfunction. Such use is strongly 
discouraged.
When you are not going to use the unit 
for an extended time
≥ When storing the unit in a cupboard or 
cabinet, it is recommended that you place 
a desiccant (silica gel) in with it. The battery used in this unit is a 
rechargeable lithium-ion battery. It is 
susceptible to humidity and temperature and 
the effect increases the more the 
temperature rises or falls. In cold areas, the 
full charge indication may not appear or the 
low battery indication may appear about 
5 minutes after starting use. At high 
temperatures, the protection function may 
be triggered, making it impossible to use the 
unit.
Be sure to detach the battery after use.
≥
If the battery is left attached, a minute 
amount of current continues to flow even if 
the unit is off. Keeping the unit in this state 
may result in over discharge of the battery. 
This may result in you not being able to 
use the battery even after it is charged.
≥ The battery should be stored in the vinyl 
bag so metal does not come into contact 
with the terminals.
≥ The battery should be stored in a cool 
place free from humidity, with as constant 
temperature as possible. (Recommended 
temperature: 15 °C to 25 °C (59 °F to 
77 °F), Recommended humidity: 40%RH 
to 60%RH)
≥ Extremely high temperatures or low 
temperatures will shorten the life of the 
battery.
≥ If the battery is kept in high-temperature, 
high-humidity, or oily-smoky places, the 
terminals may rust and cause 
malfunctions.
≥ To store the battery for a long period of 
time, we recommend you charge it once 
every year and store it again after you 
have completely used up the charged 
capacity.
≥ Dust and other matter attached to the 
battery terminals should be removed.About the battery
HDCSDX1_eng.book  129 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 
						

							130VQT2W55
Prepare spare batteries when going out 
for recording.
≥Prepare batteries enough to last for 3 to 4 
times the period you are planning to 
record for. Cold places such as a ski resort 
can shorten recording time.
If you drop the battery accidentally, 
check to see if the terminals are 
damaged.
≥ Inserting a battery with damaged terminals 
can damage the unit.
Do not throw an old battery into fire.
≥ Heating a battery or throwing it into a fire 
may result in an explosion.
If the operating time is very short even 
after the battery has been recharged, the 
battery has worn out. Please purchase a 
new battery. ≥
If the temperature of the battery is 
extremely high or extremely low, charging 
may take time or the battery may not be 
charged.
≥ If you use the AC adaptor near a radio, 
radio reception may be disturbed. Keep 
the AC adaptor 1 m (3.3 feet) or more 
away from the radio.
≥ When using the AC adaptor, it may 
generate whirring sounds. However, this is 
normal.
≥ After use, be sure to disconnect the AC 
adaptor. (If it is left connected, a minute 
amount of current is consumed.)
≥ Always keep the electrodes of the AC 
adaptor and battery clean.About the AC adaptor
HDCSDX1_eng.book  130 ページ  ２０１０年６月１１日　金曜日　午前９時２７分