Panasonic Hdc Sdx1 Operating Instructions

41VQT2W55
4(Only when setting the region of your travel destination)
Touch [DESTINATION].≥Touch [ENTER].
≥ When the home region is set for the first time, the screen for selecting home/travel 
destination appears after setting the home region successively. If the home region has 
already been set once, execute the menu operation for Step 1.
5(Only when setting the region of your travel 
destination)
Touch  /  to select your travel 
destination and touch [ENTER].
≥Touch [SUMMER TIME SET] to set daylight...

42VQT2W55
The unit is put into recording pause approx. 1 second when the unit is turned on with the 
mode set to   or  .
≥Depending on the recording conditions, start time may be longer than 1 second.
≥ In the Quick power on mode, the zoom magnification becomes 1 k.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥ When in Quick start standby mode about 80% of the power used in Recording pause 
mode is being consumed, so the recording time will be reduced.
≥...

43VQT2W55
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed 
with this sound.(Volume low)/ ( Vo l um e  hi g h)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. ( l120)
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect  the images actually recorded.
(Makes even brighter)/ (Makes brighter)/ (Normal)/ (Makes less bright)/ *(Automatic adjustment)
* It is not...

44VQT2W55
Please refer to page 91.
Set to [YES] for changing the menu settings back to the default condition.
≥Settings for [CLOCK SET] and [LANGUAGE] will not be changed.
Please be aware that if a medium is formatted, then all the data recorded on the medium will be 
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l95, 102)≥When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/...

45VQT2W55
This item is used to start the unit demonstration.
(Only when the mode is at the   or   position)
If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card 
inserted, the demonstration automatically starts.
If any operation takes place, the demonstration is canceled. However if no operations take 
place for approx. 10 minutes, the demonstration automatically starts again. To stop the 
demonstration, set [DEMO MODE] to [OFF] or insert an SD card.
This item is used to start...

46VQT2W55
Advanced
Recording 
(Advanced)
1
Zoom in/out function
The default setting of the [ZOOM MODE] is [i.Zoom 23k]. It can be extended to a maximum 
of 23 k during Motion Picture Recording Mode. ( l57)
¬ Change the mode to   or  .
When in Still Picture Recording Mode, it is possible to take a picture with zoom up to a 
maximum of 40 k without degrading the picture quality by setting the picture size to [  
0.3M] ( l66)
∫ Extra optical zoom mechanism
When you set the picture size to [  0.3M], the...

47VQT2W55
Advanced
Recording 
(Advanced)
2
Image Stabilizer 
Function
Use the image stabilizer to reduce the effects of shake during recording.¬Change the mode to   or  .
∫ Changing Image stabilizer mode
(Motion Picture Recording Mode)
When set to [ON], you can further improve image stabilization for recording while walking, or 
holding the unit and recording a distant subject with zoom.
≥This function’s default setting is [ON].
(Still Picture Recording Mode)
[MODE1]:
The function works all the time....

48VQT2W55
In Motion Picture Recording Mode, you can further improve optical image stabilization by 
touching and holding O.I.S. LOCK icon. With this function, you can further reduce the effects 
of the shake that tends to occur when using zoom.
AO.I.S. LOCK icon
≥ Press the Optical image stabilizer button to switch the image stabilizer to ON.
≥  is displayed while you are touching the icon.
≥ Optical Image Stabilizer Lock is released when you remove your finger from the icon.
≥ Operation icon will...

49VQT2W55
Advanced
Recording 
(Advanced)
3
AF/AE tracking
It is possible to set the focus and exposure to the subject specified on the touch screen.The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking)¬Change the mode to   or  .
1Touch .
≥  will be displayed on the screen.
≥ When [FACE RECOG.] ( l58) is [ON] and 
a registered face is detected, the target is 
automatically locked.
2Touch the object and lock the 
target.
A Target frame
≥ When you touch...

50VQT2W55
Advanced
Recording 
(Advanced)
4
Recording with the video 
light
The video light enables brightening of the images taken in a dimly-lit place.¬Change the mode to   or  .
≥When set to  / , the video light turns on in Low Light Mode in Intelligent Auto Mode.
≥ When the video light is in use, the recordable time when using the battery is shortened.
≥ The subject should be within 1.5 m (4.9 feet) of the unit.
≥ Using the Color Night Rec Function at the same  time will make conditions even...