Panasonic Hdc Sdx1 Operating Instructions

11VQT2W55
Accessories
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Jun. 2010. These may be subject to change.
Battery pack
VW-VBK180
AC adaptor
VSK0711
AC cable
K2CA2CA00025
AV multi cable
K1HY12YY0004
USB cable
K1HY04YY0032
Stylus pen
VGQ0C14
CD-ROM
Software
HDCSDX1_eng.book  11 ページ  ２０１０年６月１１日　金曜日　午前９時２７分 

12VQT2W55
Quick Guide
∫Inserting the battery
Install the battery by inserting it in the 
direction shown in the figure.
A Insert the battery until it clicks and locks.
∫Charging the battery
A DC input terminal
1 Connect the AC adaptor to the DC input 
terminal.
2 Connect the AC cable to the AC 
adaptor, then the AC outlet.
≥ The status indicator will flash red at an 
interval of 2 seconds, indicating that 
charging has begun.
It will turn off when the charging is 
completed.
∫ Inserting/removing an SD...

13VQT2W55
∫To turn off the unit
B The status indicator goes off.
∫Selecting a mode
Operate the mode switch to change the 
mode to ,  or .
∫How to use the touch screen
You can operate by directly touching the 
LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied) 
for detailed operation or if it is hard to 
operate with your fingers.
Touch and release the touch screen to select 
icon or picture.
∫Language selection
1) Press the MENU button, then touch 
[SETUP]  #...

14VQT2W55
∫Motion picture/Still picture 
playback
1) Change the mode to  .
2) Touch the play mode select icon  A.
3) Select the [VIDEO/PICTURE] you wish  to play back.
≥ Touch [ENTER].
4) Touch the scene or the still picture to be  played back.
B  is displayed when [AVCHD] is 
touched or   is displayed when 
[MP4] is touched in step 3.
≥ Next (previous) page can be displayed by 
touching / .
5) Select the playback operation by  touching the operation icon.
COperation icon (Motion picture playback)
1
/;:...

15VQT2W55
Preparation
Before using
1
Parts identification and 
handling
1 Power button [ ] (l24)
2 Delete/Video light button  [ /LIGHT] (  l50, 83)
3 Intelligent auto/Manual button  [iA/MANUAL] ( l33, 70)
4 Optical image stabilizer button  [ O.I.S.] ( l47)
5 Recording start/stop button ( l29)
6 Battery holder ( l19)
7 HDMI mini connector [HDMI]  (l 89, 93)
8 USB terminal [ ] ( l96, 110, 116)
9 AV multi connector [AV MULTI] 
(l 89, 101)
≥ Use the AV multi cable (only the supplied 
cable).
10 Access lamp...

16VQT2W55
20 LCD monitor (Touch screen) (l26)
≥ It can open up to 90 o.
≥ It can rotate up to 180 o A towards the lens 
or 90 o B  towards the opposite direction.
21 Menu button [MENU] ( l39)
22 Adjust zoom buttons ( l46)
23 Sub recording start/stop button 
(l 28)
≥ This button functions in the same manner 
as the recording start/stop button.
24 Tripod receptacle
25 Battery release lever [BATT] ( l19)
20
2221
23
Due to limitations in LCD production 
technology, there may be some tiny bright 
or dark...

17VQT2W55
26 Photoshot button [ ] (l31)
27 Zoom lever [W/T] (In Motion Picture  Recording Mode or Still Picture 
Recording Mode) (l 46)
Thumbnail display switch [ / ]/
Volume lever [ sVOL r] (In Playback 
Mode) ( l37)
28 Mode switch ( l25)
29 Status indicator ( l24)
30 DC input terminal ( l20)
≥ Do not use any other AC adaptors except 
the supplied one.
31 Grip belt
Adjust the length of the grip belt so that it fits 
your hand.
1 Flip the belt.
2 Adjust the length.
3 Replace the belt.28
26
3127
30
29...

18VQT2W55
Preparation
Setup
1
Power supply
∫About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBK180/VW-VBK360.
≥The unit has a function for distinguishing batteries which can be used safely. The 
dedicated battery (VW-VBK180/VW-VBK360) supports this function. The only 
batteries suitable for use with this unit are genuine Panasonic products and 
batteries manufactured by other companies and certified by Panasonic. (Batteries 
which do not support this...

19VQT2W55
≥Press the power button to turn off the unit. ( l24)
Install the battery by inserting it in the direction shown in the figure.
Inserting/removing the battery

Removing the batteryBe sure to hold down the power button until 
the status indicator goes off. Then remove 
the battery while supporting the unit to 
prevent it from dropping.
Move the battery release lever in the 
direction indicated by the arrow and 
remove the battery when unlocked.
0ã0â0õ 0õ
A Insert the battery until it clicks 
and...

20VQT2W55
Important:
≥Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. 
Also, do not use the AC cable from other equipment with this unit.
≥ The battery can also be charged using a battery charger (VW-BC10PP; optional).
≥ The battery will not be charged if the unit is turned on.
A DC input terminal
1Connect the AC adaptor to the DC input terminal.
2Connect the AC cable to the AC adaptor, then...