Panasonic Hdc Sdt750 Operating Instructions

							101VQT3B18
To delete an unnecessary portion of a scene, first divide the scene and then delete the 
unnecessary portion.
≥Change the mode to   and touch the play mode select icon to select [SD CARD]/
[1080/60p] or [SD CARD]/[AVCHD]. ( l37)
1Select the menu.
2Touch the scene to be divided.
3Touch   to set the dividing point.≥Using slow-motion playback or frame-by-frame playback 
makes it easy to search for the point where you want to 
divide the scene. ( l90)
≥ Touch [YES] to continue dividing the same scene. To 
continue dividing other scenes, touch [NO] and repeat steps 
2-3.
4Press the MENU button to complete dividing.
5Delete the unnecessary scene. (l 99)
To delete all the divided points
≥The scenes that were deleted after division cannot be recovered.
≥You cannot divide a scene if you are playing back a disc with a DVD burner (optional) 
connected, or if the number of scenes of a given date would exceed 99 scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided 
points cannot be deleted.
≥ If personal information in the divided scenes is deleted, the personal information is deleted 
when the divided scenes are canceled.
Dividing a scene to partially delete
: [EDIT SCENE]  # [DIVIDE] # [SET]
[DIVIDE]  # [CANCEL ALL]
0h00m00s0h00m00s0h00m00s0h00m00s0h00m00s0h00m00s
HDC-SDT750&TMT750-P-VQT3B18_mst.book  101 ページ  ２０１０年８月２０日　金曜日　午後３時５３分 
						

							102VQT3B18
Deletes face recognition information from scenes in which faces were recognized.
≥Change the mode to  and touch the play mode select icon to select [SD CARD]/
[1080/60p] or [SD CARD]/[AVCHD]. (l 37).
1Select the menu.
2Touch the desired scenes with personal information to be deleted.≥ appears at scenes for which faces were recognized. Touch one of the scenes where 
 appears.
≥  will change to   (red) when touched. Touch the   (red) again to cancel the 
operation.
≥ Up to 99 scenes can be selected in succession.
3Touch [Delete] or press the   button.
≥To continuously delete other personal information, repeat steps 2-3.
≥ Press the MENU button to complete the settings.
When you stop deleting halfwayTouch [CANCEL] or press the MENU button while deleting personal information.
≥The personal information that has already been deleted when the deletion is canceled 
cannot be restored.
≥During Disc Playback when connected to a DVD burner (optional), scenes/still pictures 
cannot be deleted.
Scenes/still pictures can be  protected so that they are not deleted by mistake.
(Even if you protect some scenes/still pictures, formatting the media will delete them.)
≥ Change the mode to  .
1Select the menu.
2Touch the scene/still picture to be protected.
≥When touched, the scene/still picture is selected and the   indication appears on the 
thumbnail. Touch the scene/still pict ure again to cancel the operation.
≥ Press the MENU button to complete the settings.
≥When the disc playback is selected while a DVD burner (optional) is connected, scenes/
still pictures cannot be protected.
Deleting personal information
: [VIDEO SETUP]  # [DELETE PERSONAL INFO]
Protecting scenes/still pictures
: [VIDEO SETUP] or [PICT. SETUP]  # [SCENE PROTECT]
HDC-SDT750&TMT750-P-VQT3B18_mst.book  102 ページ  ２０１０年８月２０日　金曜日　午後３時５３分 
						

							103VQT3B18
Advanced
Editing
2
DPOF setting
You can write the data selecting still pictures to be printed and the number of prints (DPOF 
data) onto the SD card.
¬Change the mode to   and touch the play mode select icon to select 
[SD CARD]/[PICTURE]. ( l37)
∫ What is DPOF?
DPOF (Digital Print Order Format) is a format  which allows the user of a digital camera to 
define which captured images on the SD card are to be printed, together with information on 
the number of copies they wish to print. (Please note: Not all commercial printing services 
support this feature at this time.)
1Select the menu.
2Touch the still picture to be set.
3Touch  /  to set the number of 
prints.
≥ Up to 999 prints can be selected. (Prints for set 
number can be printed with a printer that supports 
DPOF.)
≥ To cancel the setting, set the number of prints to [0].
4Touch [ENTER].
≥To continuously set other still pictures, repeat steps 2-4.
≥ Press the MENU button to complete the settings.
To cancel all DPOF settings
≥When the disc playback is selected while a DVD burner (optional) is connected, scenes/
still pictures cannot be set DPOF.
≥ You cannot add the recording date to pictures to be printed with the DPOF settings. : [PICT. SETUP] 
# [DPOF SET]  # [SET]
[DPOF SET]  # [CANCEL ALL]
HDC-SDT750&TMT750-P-VQT3B18_mst.book  103 ページ  ２０１０年８月２０日　金曜日　午後３時５３分 
						

							104VQT3B18
Advanced
With a TV
1
Watching Video/Pictures 
on your TV
≥Use the  AV multi cable (supplied) or HDMI mini cable (supplied/optional) and check 
the output settings. (l 107)
≥ Use of the following Panasonic HDMI mini cables is recommended to connect the unit to 
the HDMI terminal.
≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high 
definition TV and then play back the recorded high definition images, you can enjoy them 
in high resolution with high quality sound.
1Connect this unit to a TV.
Confirm the terminals on your TV and use a cable compatible with the terminals. 
Image quality may vary with the connected terminals.
1 High quality
2 HDMI terminal
3 Component 
terminal
4 Video terminal
AHDMI mini cable 
≥ Be sure to connect to the 
HDMI terminal.
B AV multi cable 
(supplied)
Picture quality
1 High definition images 
when connecting to 
HDMI terminal
2 High definition images 
when connecting to 
component terminal 
compatible with 1080i
Standard images 
when connecting to 
component terminal 
compatible with 480i
3 Standard images 
when connecting to 
video terminal
HDC-SDT750&TMT750-P-VQT3B18_mst.book  104 ページ  ２０１０年８月２０日　金曜日　午後３時５３分 
						

							105VQT3B18
≥Check that the plugs are inserted as far as they go.
≥ Always use the supplied HDMI mini cable  or a genuine Panasonic HDMI mini cable 
(RP-CDHM15, RP-CDHM30; optional).
≥ Do not use any other AV multi cables except the supplied one.
≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable 
is not required.
≥ When connecting to the AV terminal of the TV, do not connect the component terminal plug 
of the AV multi cable. Image may not display when the component terminal plug is 
connected simultaneously.
2Select the video input on the TV.≥Example:
Select the [HDMI] channel with a HDMI mini cable.
Select the [Component] or [Video 2] channel with an AV multi cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the TV. (For more 
information, please read the operating instructions for the TV.)
3Change the mode to   to play back.
CablesReference items
A HDMI mini cable  ≥Connecting with a HDMI mini cable ( l107)
≥ Listening in 5.1 channel sound ( l107)
≥ Playback using VIERA Link
™ (HDAVI Control™) 
( l 11 0 )
B AV multi cable (supplied) ≥Connecting with the AV multi cable ( l107)
HDC-SDT750&TMT750-P-VQT3B18_mst.book  105 ページ  ２０１０年８月２０日　金曜日　午後３時５３分 
						

							106VQT3B18
∫To watch images on a regular 
TV (4:3) or when both sides of 
the images do not appear on 
the screen
Change the menu setting to display the 
images correctly. (Check the TV setting.)
Example of images with a 16:9 aspect 
ratio on a regular TV (4:3)
≥If a wide-screen TV is connected, adjust 
the aspect setting on the TV. (Refer to the 
operating instructions of the TV for 
details.)
∫ To display the on-screen 
information on the TV
When the EXT DISPLAY button on the 
remote control is pressed, the information 
displayed on the screen (operation icon and 
time code etc.) can be displayed/not 
displayed on the TV.
≥
It will not display when the unit is turned off.
≥When the AV multi cable is connected to 
this unit, the setup screen of the AV multi 
destination is displayed on the screen of 
this unit. Touch either [COMPONENT] or 
[AV OUT] in accordance with the terminal 
connecting to the TV. ( l107)
≥ If the HDMI mini cable and AV multi cable 
are connected at the same time, output 
will be prioritized in order of the HDMI mini 
cable, AV multi cable.
: [SETUP] 
# [TV ASPECT]  # 
[4:3]
[TV ASPECT] setting
[16:9][4:3]
SEARCH
STILL ADV STILL ADVSEARCH
/VOL
DATE/TIMESTOPEXT DISPLAYPLAY
STOP
SKIP SKIP
PAUSE
Refer to the following support site for information about Panasonic TVs with an SD 
card slot for playing back your pictures.
http://panasonic.net/
≥
It may not be possible to play back scenes on the TV depending on the recording mode.
≥ For details on how to play back, please read the operating instructions for the TV.
HDC-SDT750&TMT750-P-VQT3B18_mst.book  106 ページ  ２０１０年８月２０日　金曜日　午後３時５３分 
						

							107VQT3B18
Select the desired method of HDMI output.
≥[AUTO] determines the output resolution automatically based on information from the 
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method 
[1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please 
read the operating instructions for the TV.)
≥ Image will not display on TV for a few seconds in the following cases.
jWhen the 1080/60p recording mode is turned  on/off during Motion Picture Recording 
Mode
j When [1080/60p] is touched during Motion Picture Playback Mode
You still can listen to the 5.1 channel sound recorded from the internal microphones when 
this unit is connected to the 5.1 channel compatible AV amplifier or TV using the HDMI mini 
cable.
Please read the AV amplifier and TV operating instructions for how to connect this unit to the 
AV amplifier and TV.
≥ If you connect this unit to a Panasonic AV amplifier that are compatible with VIERA Link, 
linked operations (VIERA Link) become possible. ( l11 0 )
≥ Audio recorded when [MIC SETUP] is set to [STEREO MIC] or recorded from an external 
microphone is in stereo (2 ch).
AV multi connector output setting can be changed.
Changing the component output setting
Connecting with a HDMI mini cable
: [SETUP]  # [HDMI RESOLUTION]  # [AUTO]/[1080p]/[1080i]/[480p]
Listening in 5.1 channel sound
Connecting with the AV multi cable
: [SETUP] # [AV MULTI]  # desired setting
[COMPONENT]:When connecting to the component terminal
[AV OUT]:When connecting to the video terminal
: [SETUP]  # [COMPONENT OUT]  # desired setting
[480i]:When connecting to the component terminal on the TV compatible with 480i. 
(Playback is in standard quality.)
[1080i]:When connecting to the component terminal on the TV compatible with 
1080i. (Playback is in high definition quality.)
HDC-SDT750&TMT750-P-VQT3B18_mst.book  107 ページ  ２０１０年８月２０日　金曜日　午後３時５３分 
						

							108VQT3B18
Advanced
With a TV
2
3D video playback
Connect the unit to a 3D compatible television and play back scenes recorded in 3D to enjoy 
life-like and powerful 3D video.
¬Change the mode to  and touch the play mode select icon to select [SD 
CARD]/[AVCHD]. ( l37)
1Select the menu.
2Connect the unit to 3D compatible television and play back scenes 
recorded in 3D. ( l104)
≥Connect the unit to the 3D compatible  television using the HDMI mini cable.
≥ For the scenes recorded in 3D,   will appear on the thumbnail display at playback.
≥ Playback switches between 3D video and 2D video automatically.
≥ If your television does not switch to a 3D video, make the necessary settings on the TV. 
(For further details, please read the operating instructions for the TV.)
∫ Playing back scenes recorded in 3D as (conventional) 2D video
For the latest information on 3D compatible televisions and recorders that are 
capable of playing back 3D video recorded using the unit, see the support site below.
http://panasonic.jp/support/global/cs/e_cam/index.html
: [SETUP]  # [3D PLAYBACK]  # [3D]
[3D]:Play back scenes recorded in 3D in unaltered form as 3D video.
[2D]:If your television does not support 3D, set to [2D] to play back scenes 
recorded in 3D.
: [SETUP]  # [3D PLAYBACK]  # [2D]
≥ Set to [2D] when using a television that is not 3D compatible.
≥ If you feel tired, uncomfortable or otherwise strange when viewing scenes recorded in 
3D, set to [2D].
3D
HDC-SDT750&TMT750-P-VQT3B18_mst.book  108 ページ  ２０１０年８月２０日　金曜日　午後３時５３分 
						

							109VQT3B18
≥You cannot play back 3D video on the LCD monitor of the unit. When you play back scenes 
recorded in 3D on the LCD monitor, they will be played back in 2D.
≥ You can also play back scenes recorded in 3D by date. Even if scenes are recorded on the 
same day, the unit will display the date sepa rately when switching between 2D and 3D 
recordings. (l 94)
≥ When you play back scenes successively, a black screen  will appear for a few seconds 
between scenes recorded in 3D and scenes recorded in 2D.
≥ When outputting 3D video to a television, the date and time display is double normal size.
≥ In the 1 scene or Highlight&Time frame index thumbnail display, a black frame appears 
around the thumbnails. For the 9 scenes or 20 scenes thumbnail display, black frames may 
appear when a divide or repair is performed. (The unit automatically performs scene repair 
if faulty management information is detected.)
≥ When you select a 3D video thumbnail, it may take a few seconds for playback to start. 
After playback, the thumbnail display may take a few seconds to reappear.
≥ If you set [3D PLAYBACK] to [3D] with the unit connected to a television that does not 
support 3D, the video will be played back in 2 screens.
≥ Depending on the 3D-compatible television  used, switching to 3D mode may be slow and 
you may not be able to watch the first scene. In this case, use the pause button. 
≥ When viewing 3D video, your eyes may become tired if you are too close to the television 
screen. Use the supplied remote control to operate from a distance. 
Functions not available during 3D playback
jCreating still picture from motion picture
j Highlight&Time frame index ([FACE], [HIGHLIGHT])
j Yellow button display and deletion function during VIERA Link (During playback only)
j Face highlight playback
j Highlight playback
j Intelligent scene selection
HDC-SDT750&TMT750-P-VQT3B18_mst.book  109 ページ  ２０１０年８月２０日　金曜日　午後３時５３分 
						

							110VQT3B18
Advanced
With a TV
3
Playback using VIERA Link™ 
(HDAVI Control
™)
¬ Change the mode to  .
1Select the menu.
≥If you are not using VIERA Link, set to [OFF].
2Connect this unit to a Panasonic TV compatible with VIERA Link 
with a HDMI mini cable.
A HDMI mini cable
B Panasonic TV compatible with VIERA Link
≥ It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there 
are 2 or more HDMI input terminals on the TV.
≥ VIERA Link must be activated on the connected TV. (Read the operating instructions of the 
TV for how to set etc.)
≥ Always use the supplied HDMI mini cable  or a genuine Panasonic HDMI mini cable 
(RP-CDHM15, RP-CDHM30; optional).
What is the VIERA Link?
≥
VIERA Link
™ is a new name for EZ Sync™.
≥ This function allows you to use your remote control for the Panasonic TV for easy 
operations when this unit has been connected to a VIERA Link compatible device using 
a HDMI mini cable for automatic linked operations. (Not all operations are possible.)
≥ VIERA Link is a unique Panasonic function built on a HDMI control function using the 
standard HDMI CEC (Consumer Electronics Control) specification. Linked operations 
with HDMI CEC compatible devices made by other companies are not guaranteed. 
When using devices made by other companies that are compatible with VIERA Link, 
refer to the operating instructions for the respective devices.
≥ This unit is compatible with VIERA Link Ver.5. VIERA Link Ver.5 is the newest 
Panasonic version and is also compatible with existing Panasonic VIERA Link devices. 
(As of Dec 2009)
: [SETUP]  # [VIERA Link]  # [ON]
HDMI IN


HDC-SDT750&TMT750-P-VQT3B18_mst.book  110 ページ  ２０１０年８月２０日　金曜日　午後３時５３分