Panasonic Hdc Sd900 Operating Instructions
Have a look at the manual Panasonic Hdc Sd900 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
141VQT3K80 ∫Playback indications ∫Indication of connection to other devices ∫ Confirmatory indications ∫ Confirmatory indications when a DVD burner is connected 1/;/5 // 6// 7/8 /9 /: / D /E /;1 /2; Display during playback ( l36, 87) 0h00m00s Playback time ( l36) No.10 Scene number Repeat playback ( l89) Resume playback ( l89) 100-0001 Still picture folder/file name 1 DPOF already set (to more than 1) ( l100) Protected motion pictures/ still pictures ( l99) 1080/50p recorded scene ( l 36) iFrame recorded scene ( l 36) AVCHD recorded scene ( l 36) Relay recorded scene ( l 66) *1 Interval recorded scene (l 65) Still picture recorded using smile shot ( l59) Scenes recorded in 3D ( l 109) 1080/50p 3D Accessing the card ( l121, 135) Accessing the built-in memory ( l 121, 135) *1 Accessing the HDD ( l121, 135)*2 – – (Time display) The built-in battery is low. ( l 26) Warning for face-to-face recording ( l28) SD card is not inserted or is non-compatible. Disc playback ( l117) Scene copied in [Standard] ([XP]) Scene copied in [Standard] ([SP]) /// /// Disc type ( l11 3 ) XP SP HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 141 ページ 2010年12月29日 水曜日 午後2時50分
142VQT3K80 Major confirmation/error messages to be indicated on the screen in text. *1 only *2 only Others Messages PERIODICALLY MAKE BACK UP OF DATA IN BUILT-IN MEMORY.*1 RECOMMEND DATA BACK UP PERIODICALLY.*2 We recommend backing up important recorded motion pictures and still pictures periodically to a PC, DVD disc etc. to protect it. (l113, 126) This message does not indicate that there is a problem with this unit. HDD BACKUP RECOMMENDED.*2 There is a possible problem with the HDD. Copy the motion pictures and still pictures stored on the HDD to a PC or a DVD disc immediately ( l113, 126), and detach the power and contact your dealer. HDD ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.*2 Access to HDD failed. Turn on the unit again. Make sure not to give a strong shock or impact to the unit. CANNOT OPERATE DUE TO LOW TEMPERATURE.*2 The internal temperature of this unit is extremely low so it cannot be operated. If “Please Wait.” appears after this message, wait a while without turning the unit off. It may take time until the unit can be used. CHECK CARD. This card is not compatible or it cannot be recognised by the unit. If this message appears even though motion pictures and still pictures are recorded on an SD card, the card may be unstable. Reinsert the SD card, then turn the unit off and then on again. THIS BATTERY CANNOT BE USED. ≥ Use a battery that is compatible with this unit. ( l15) If using a Panasonic battery compatible with this unit, remove the battery and then insert it again. If the message appears even after repeating this several times, this unit needs repair. Detach the power and consult the dealer who you purchased this unit from. Do not attempt to repair it by yourself. ≥ You are attempting to connect an AC adaptor not compatible with this unit. Use the supplied AC adaptor. ( l16) PLEASE CHECK EXTERNAL DRIVE OR DISC. A disc that cannot be used when connecting the unit to the DVD burner has been inserted, or the DVD burner is not recognised proper ly. Connect the USB Connection Cable again and insert a disc to copy the data. ( l11 3 ) HDC-TM900HDC-HS900 HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 142 ページ 2010年12月29日 水曜日 午後2時50分
143VQT3K80 About recovery If faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending on the error.) ≥The above message is displayed when abnormal management information is detected when the scenes are displayed in thumbnail. To perform the repair, touch the scene with in the thumbnail, and start the playback. Please be aware that if the repair fails, scenes with will be deleted. ≥ Use a sufficiently charged battery or the AC adaptor. ≥ Depending on the condition of the data, it may not be possible to completely repair the data. ≥ If recovery fails, it will not be possible to play back scenes recorded before the unit turned off. ≥ When data recorded on another device is recovered, it may not be possible to play back the data on this unit or the other device. ≥ If recovery fails, turn the unit off and on again after waiting a while. If recovery fails repeatedly, format a media on the unit. Please be aware that if a media is formatted, then all the data recorded on the media will be erased. ≥ If the thumbnail information is recovered, displaying the thumbnails may become slower. SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED. (IRREPARABLE SCENES WILL BE DELETED.) HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 143 ページ 2010年12月29日 水曜日 午後2時50分
144VQT3K80 Others Troubleshooting Power ProblemCheck points This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. ≥ Charge the battery again to ensure it is sufficiently charged. ( l16) ≥ In cold places, the battery using time becomes shorter. ≥ The battery has a limited life. If the operating time is still too short even after the battery is fully charged, the battery has worn out and needs to be replaced. This unit is turned off automatically. ≥ If the unit turns off when you turn off the power to the TV using the TV remote control, the VIERA Link is at work. If you are not using the VIERA Link, set [VIERA Link] to [OFF]. ( l107) ≥ When this unit is connected to a DVD burner to copy or play back images (a disc is being accessed), the unit turns off automatically if the USB Connection Cable is removed. This unit cannot be operated though it is turned on. This unit does not operate normally. ≥ Remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the unit again. (Conducting the above operation while the media is being accessed may damage the data on the media.) ≥ If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from. “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.” is displayed. ≥ The unit has automatically detected an error. Restart the unit by turning off and on. ≥ The unit will be turned off in about 1 minute if the unit is not turned off and on. ≥ Repair is needed if it is repeatedly displayed even if it is restarted. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself. HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 144 ページ 2010年12月29日 水曜日 午後2時50分
145VQT3K80 Indication ProblemCheck points Remaining battery indication is not displayed properly. ≥ The remaining battery capacity indication is an approximation. If the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again. Recording ProblemCheck points The unit arbitrarily stops recording. ≥ Use an SD card that can be used for motion picture recording. ( l20) ≥ The recordable time may have shortened due to the deterioration of the data writing speed or repeated recording and deletion. Using the unit, format the SD card, built-in memory or HDD. ( l46) ≥ If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF]. ( l70) ≥ If the unit is exposed to strong vibrations or shocks while recording on HDD, recording may stop to protect the HDD. If the unit is used in a place with loud sounds, the recording may stop due to sound vibrations. Recording data on an SD card is recommended in these places. Auto focus function does not work. ≥ Switch to intelligent auto mode. ≥ If you are trying to record a scene which is hard to bring into focus in auto focus mode, use the manual focus mode to adjust the focus. ( l35, 83) Colour balance of images is strange when recording in a place such as a gymnasium. ≥ In a place with multiple light sources, such as a gymnasium or a hall, set the white balance setting to (Indoor mode 2). If you cannot record clearly with the (Indoor mode 2), set it to (Manual adjustment mode). (l 81) Colour or brightness of the image changes, or you may see horizontal bars in the image. The LCD monitor flickers indoors. ≥ Colour or brightness of the image may change, or you may see horizontal bars in the image when the object is recorded under fluorescent light, mercury light or sodium light, etc., but this is not a malfunction. ≥ In motion picture recording mode, record in intelligent auto mode or set the shutter speed to 1/100 in areas where the power supply frequency is 50 Hz, or 1/125 in areas of 60 Hz. ≥ In still picture recording mode, this will not affect the recorded image. HDC-HS900 HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 145 ページ 2010年12月29日 水曜日 午後2時50分
146VQT3K80 Object seems to be warped.≥ Object seems to be warped slightly when the object moves across the image very fast, but this is because the unit is using MOS for the image sensor. This is not a malfunction. Playback ProblemCheck points Any scenes/still pictures cannot be played back. ≥ Any scenes/still pictures where the thumbnails are displayed as cannot be played back. Scenes cannot be deleted. ≥ Release the protect setting. (l 99) ≥ Any scenes/still pictures where the thumbnails are displayed as cannot be deleted. If the scenes/still pictures are unnecessary, format the media to erase the data. ( l46) Please be aware that if a media is formatted then all the data recorded on the media is erased and cannot be recovered. Back up important data on a PC, disc etc. White round spots like soap bubbles appear on the recorded picture. ≥ If you take a picture with the flash in a dark place or indoors, white round spots may appear on the picture caused by the flash reflecting of particles of dust in the air. This is not a malfunction. A characteristic of this is that the number of round spots and their position differ in every picture. Recording ProblemCheck points HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 146 ページ 2010年12月29日 水曜日 午後2時50分
147VQT3K80 With other products ProblemCheck points Although this unit is correctly connected to a TV, images cannot be seen. The images are squeezed horizontally. ≥ Please read the operating instructions of your TV and select the channel that matches the input used for the connection. ≥ Change the [TV ASPECT] setting to match the aspect ratio of the TV. ( l105) ≥ Change the setting of the unit depending on the cable connecting to the TV. ( l106) If the SD card is inserted in another device, it is not recognised. ≥ Check that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card/ SDXC Memory Card) that you inserted. Refer to the operating instructions of the device for details. VIERA Link does not work. (Setting on this unit) ≥ Connect with a HDMI mini cable (optional). ( l107) ≥ Touch [MENU], then touch [SETUP] # [VIERA Link] # [ON]. ( l107) ≥ Turn the unit off and then back on again. (Setting on other devices) ≥ If the TV input does not switch automatically, switch the input using the TV remote control. ≥ Check the VIERA Link setting on the connected device. ≥ Please refer to the operating instructions of the connected device. The power of the DVD burner cannot be turned on. ≥ When the unit is connected to the DVD burner, use the respective AC adaptors for both this unit and the DVD burner. Cannot copy scenes on the SD card by connecting to other equipment with the USB cable. ≥ Other equipment might have not recognised the SD card. Unplug the USB cable once, and reconnect it. When this unit is connected to a TV in still picture recording mode, the picture on the TV may appear grainy. ≥ This is not a malfunction an d does not affect the still pictures being recorded or played back. HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 147 ページ 2010年12月29日 水曜日 午後2時50分
148VQT3K80 With a PC ProblemCheck points When connected by the USB cable, this unit is not detected by the PC. ≥ After re-inserting the SD card into the unit, reconnect the supplied USB cable. ≥ Select another USB terminal on the PC. ≥ Check the operating environment. (l 129, 138) ≥ Connect the supplied USB cable again after restarting the PC and turning on this unit again. When the USB cable is disconnected, an error message will appear on the PC. ≥ To disconnect the USB cable safely, double-click the icon in the task tray and follow the instructions on the screen. Cannot see the PDF operating instructions for HD Writer AE 3.0. ≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to read the PDF operating instructions for HD Writer AE 3.0. Cannot import AVCHD scenes with iMovie’11. ≥ You may not be able to import AVCHD scenes with iMovie’11 when both AVCHD scenes and iFrame scenes are recorded on a media (an SD card, built-in memory or HDD). In such a case, first co py all the iFrame scenes data to iMovie’11, delete all the iFrame scenes data on the media, and then import the AVCHD scenes with iMovie’11. Others ProblemCheck points Item other than the touched one is selected. ≥ Calibrate the touch screen. ( l48) If the SD card is inserted in this unit, it is not recognised. ≥ If the SD card is formatted on a PC, it may not be recognised by this unit. Use this unit to format SD cards. (l 46) The remote control does not function. ≥ [REMOTE CONTROL] of the [SETUP] is [OFF]. ( l49) ≥ The button-type battery of the remote control may be run out. Replace it with a new button-type battery. ( l49) HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 148 ページ 2010年12月29日 水曜日 午後2時50分
149VQT3K80 ∫If scenes do not change smoothly when played back on another device (AVCHD, 1080/50p) The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be play ed back depends on the playback unit. Depending on the unit used, the images may stop moving and become still for a moment even when none of the following conditions are applicable. ≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every 4 GB of data when played back with another device. ≥ It may not play back smoothly when the editing of scenes was done with the HD Writer AE 3.0, but it will play back smoothly if you set the seamless settings in the HD Writer AE 3.0. Refer to the operating instructions for the HD Writer AE 3.0. Principal reasons for not playing back smoothly ≥ When the scenes were recorded on different dates ≥ When scenes lasting under 3 seconds have been recorded ≥ When PRE-REC was used for recording ≥ When the interval recording is used ≥ When deleting scenes ≥ When selected scenes are copied between an SD card and the built-in memory/ HDD ≥ When selected scenes are copied to a disc in a connected DVD burner ≥ When scenes recorded more than 99 scenes on the same date HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 149 ページ 2010年12月29日 水曜日 午後2時50分
150VQT3K80 Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. ≥ Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound. ≥ Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created by speakers or large motors. ≥ Electromagnetic wave radiation generated by microprocessors may adversely affect this unit, disturbing the pictures and/or sound. ≥ If this unit is adversely affected by electromagnetic equipment and stops functioning properly, turn this unit off and remove the battery or disconnect AC adaptor. Then reinsert the battery or reconnect AC adaptor and turn this unit on. Do not use this unit near radio transmitters or high-voltage lines. ≥ If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound may be adversely affected. Make sure to use the supplied cords and cables. If you use optional accessories, use the cords and the cables supplied with them. Do not extend the cords and the cables. Do not spray insecticides or volatile chemicals onto the unit. ≥ If the unit is sprayed with such chemicals, its body may be marred and the surface finish may peel off. ≥ Do not leave rubber or plastic products in contact with the unit for a long time. When you use the unit in a sandy or dusty place such as a beach, do not let sand or fine dust get into the body and terminals of the unit. Also, keep the unit away from sea water. ≥ Sand or dust may damage the unit. (Care should be taken when inserting and removing a card.) ≥ If sea water splashes onto the unit, wipe off the water with a well wrung cloth. Then wipe the unit again with a dry cloth. When carrying the unit, do not drop or bump it. ≥ A strong impact can break the unit’s casing, causing it to malfunction. Cleaning ≥ Before cleaning, detach the battery or pull the AC cable from the AC outlet, and then wipe the unit with a soft, dry cloth. ≥ If the unit is very dirty, dip a cloth in water and squeeze firmly, and then wipe the unit with the damp cloth. Next, dry the unit with a dry cloth. ≥ Use of benzine, paint thinner, alcohol, or dishwashing liquid may alter the camera body or peel the surface finish. Do not use these solvents. ≥ When using a chemical dust cloth, follow the instructions that came with the cloth. Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 150 ページ 2010年12月29日 水曜日 午後2時50分