Panasonic Hdc Sd90 Owners Manual

							81VQT3J56
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still picture.
Picture size of the still picture to be recorded is   (1920k1080).
1Pause at the scene you want to save as a still picture during 
playback.
≥ It is convenient to use slow-motion playback and frame-by-frame playback.
2Press the   button fully.≥Date the motion picture was recorded will be registered as date of the still picture.
≥ Quality will be different from the normal still picture.
Playback operationPlayback displayOperating steps
Direct playback During Playback
Touch the Direct playback bar or slide 
it while touching.
≥
The playback pauses temporarily and 
skips to the position touched or slid to 
while touching.
≥ Playback will start by releasing your 
touching or sliding finger.
2.1M
HDC-SD90&TM90-P-VQT3J56_mst.book  81 ページ  ２０１１年１月１３日　木曜日　午前９時１８分 
						

							82VQT3J56
Highlight & Time frame index
An image of one scene is displayed as a thumbnail at set search condition. Scene can be 
played back from any midway point of the scene you wish to see.
≥Operate the zoom lever to   side and change over 
the thumbnail display to Highlight & Time frame 
index. ( l37)
1Touch .≥To display the next (previous) page:
jSlide the thumbnail display upward (downward) while touching it
j Switch the Touch Menu, and then touch   (up) /   (down) on the thumbnail 
scroll lever
2Touch the desired search condition.[3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]*/[HIGHLIGHT]*
* It is not displayed on iFrame scenes.
≥When select [FACE], it will select the port ion for which face recognition was performed 
from the scenes judged to be clearly recorded. This will then be displayed as a thumbnail.
≥ A portion judged to be clearly recorded will be detected and displayed in thumbnail if you 
select [HIGHLIGHT].
3(When [MINUTES] is selected)
Touch  /  to set the time.≥It can be set up to a maximum of 60 minutes.
≥ Touch [ENTER].
4Touch the thumbnail to be played back.
≥Next (previous) thumbnail can be displayed by touching  / .
Repeat playback
Playback of the first scene starts after playback of the last scene finishes.
The   indication appears on the full screen views.
≥All the scenes are played back repeatedly. (Wh en playing back motion pictures by date, all 
the scenes on the selected date are played back repeatedly.) : [VIDEO SETUP] 
# [REPEAT PLAY]  # [ON]
MENU
HDC-SD90&TM90-P-VQT3J56_mst.book  82 ページ  ２０１１年１月１３日　木曜日　午前９時１８分 
						

							83VQT3J56
Resuming the previous playback
If playback of a scene was stopped halfway, the playback can be resumed from where it was 
stopped.
If playback of a motion picture is stopped,   appears on the thumbnail view of the stopped 
scene.
≥The memorized resume position is cleared if you turn off the unit or change the mode.
(The setting of [RESUME PLAY] does not change.)
Zooming in on a still picture during playback 
(Playback zoom)
You can zoom in by touching a still picture during playback.
1Touch and hold the part you wish to zoom in on during still picture 
playback.
≥It will display enlarged in order of normal display ( k1)  # k 2 #  k 4. Touch and hold the 
screen to zoom in from the normal display  k1 to k 2. Touch the screen to zoom in from  k2 
to  k4.
≥ The still picture is zoomed in on, centering on the part you touched.
2Move to the zoomed in position by touching 
/ / /  or slide while touching the 
screen.
≥ The location of the zoom displays for about 1 second when 
zooming in (zooming out) or moving the displayed location.
≥ The more picture is enlarged, the more its quality 
deteriorates.
Zooming out from the zoomed still picture
Touch   to zoom out. ( k4 #  k2 #  k1)
≥ Touch   to return to normal playback ( k1).
≥ You can also perform zoom operations using the zoom lever. : [VIDEO SETUP] 
# [RESUME PLAY]  # [ON]
MENU
ADisplayed location of 
the zoom
HDC-SD90&TM90-P-VQT3J56_mst.book  83 ページ  ２０１１年１月１３日　木曜日　午前９時１８分 
						

							84VQT3J56
Playing back motion pictures/still pictures by date
The scenes or the still pictures recorded on the same day can be played back in succession.
1Touch the date select icon. (l26)
2Touch the playback date.
The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
3Touch the scene or the still picture to be played back.
≥Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode 
is changed.
≥ Even if AVCHD scenes are recorded on the same day, they are grouped separately when 
the number of scenes exceeds 99. –1, –2... is added after the recording date displayed on 
the screen.
≥ Even if  AVCHD scenes or 1080/60p scenes are recorded on the same day, they are 
grouped separately whenever the AVCHD recording and 1080/60p recording are switched. 
–1, –2... is added after the recording date displayed on the screen.
≥ Even if iFrame scenes are recorded on the same day, they are grouped separately in the 
following cases.
jWhen the number of scenes exceeds 99
j When [NUMBER RESET] is performed
≥ Even if still pictures are recorded on the same day, they are grouped separately in the 
following cases.
jWhen the number of still pictures exceeds 999
j When pictures are recorded in Hi-Speed Burst Shooting mode (  is indicated after the 
date in the list by date)
j When [NUMBER RESET] is performed
≥  is displayed after the date in the list by date for the still pictures created from the 
motion picture. ( l81)
Advanced (Playback)
Various playback functions
ALL
A Date select icon
HDC-SD90&TM90-P-VQT3J56_mst.book  84 ページ  ２０１１年１月１３日　木曜日　午前９時１８分 
						

							85VQT3J56
Highlight Playback
Part that was recognized as clearly recorded is extracted from a long recording, and it can be 
played back in a short time with effects and music added.
≥Highlight playback cannot be used for iFrame 
scenes.
1Touch . ( l26)
2(Only when you would like to change the settings)
Touch [SET] to select the item to change.
3Touch [START].≥When the [SCENE SETUP] is not changed in step 2, it will play back with the last recorded 
date.
4Select the playback operation. ( l36, 80)≥When the playback is finished or stopped, the screen to select [REPLAY], 
[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.
≥Playing back of all the scenes returns if the unit is turned off or the mode is changed.
≥ Slow-motion playback, frame-by-frame playback, and direct playback bar operation are not 
possible.
∫ Scene setting
1 Touch [SELECT SCENES] or [SELECT DATE].
2 (When [SELECT SCENES] is selected)
Touch the scenes to be played back.
≥Up to 99 scenes can be selected in succession.
≥ When touched, the scene is selected and   is 
displayed. Touch the scene again to cancel the 
operation.
(When [SELECT DATE] is selected)
Touch the date to be played back.
≥A maximum of 7 days can be selected.
≥ When touched, the date is selected and surrounded 
by red. Touch the date again to cancel the operation.
3 Touch [Enter]/[ENTER].
[SCENE SETUP]:Select the scene or date to be played back.
[PRIORITY SETUP]:Select the target to give priority to play back. ( l86)
[PLAYBACK TIME]:Select the time to play back. ( l86)
[EFFECT SETUP]:Select the effect for playback. ( l86)
[MUSIC SELECT]:Select the music to be played on playback. ( l87)
ALL
HDC-SD90&TM90-P-VQT3J56_mst.book  85 ページ  ２０１１年１月１３日　木曜日　午前９時１８分 
						

							86VQT3J56
∫Priority setting
1 Touch [FACE] or [FACE RECOG.].≥If you touch [FACE], any detected face, including the face of person registered for Face 
Recognition, is given priority on playback.
2 (When [FACE RECOG.] is selected)
Touch a face to specify.
≥You can specify up to 6 faces, which are to be played 
back in priority.
≥ When touched, the registered face is selected and 
surrounded by red. Touch the registered face again to 
cancel the operation.
≥ Touch [ENTER]. When a single face is specified, the name registered for that face is 
displayed. When multiple faces are specified, the number of faces is displayed.
∫ Playback time setting
Touch the playback time.≥The playback time of [AUTO] is a maximum of approx. 
5 minutes.
≥ Playback time may become shorter than the setting, or 
it may not even play back if the part recognized as 
clearly recorded is short.
∫ Effect setting
Effects such as fade, slow-motion, still (pause), or digest playback are inserted.1 Touch the desired effect.
≥When the effect setting is changed, music setting will be set the same as the effect setting. 
(To set the effect setting and music setting to different settings, change the music setting 
after setting the effect setting.)
2 Touch [ENTER].
[POP]:Recommended for party scenes.
[CLASSICAL]:Recommended for slow moving 
scenes.
[NATURAL]:Recommended for scenery.
[DYNAMIC]:Recommended for fast moving scene such as sports scenes.
[NONE]:Effect is off.
11 12 2
2333
44
45 55666
123
45 6ANNA
KEN MARY
JOE
HDC-SD90&TM90-P-VQT3J56_mst.book  86 ページ  ２０１１年１月１３日　木曜日　午前９時１８分 
						

							87VQT3J56
∫Music setting
1 Touch your favorite music.≥When [EFFECT SETUP] is set to [NONE], you will be 
able to select [NO MUSIC]. When [NO MUSIC] is 
selected, the audio recorded at the time of shooting is 
played back.
≥ To adjust the volume of music during playback or 
audio testing, operate the volume lever. ( l37)
2 Touch [ENTER].
To test the music audio
Touch [START].
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
Changing the playback settings and playing back the 
slide show
1Touch . ( l26)
2(Only when you would like to change the settings)
Touch [SET] to select the item to change.
3(When [DATE SETUP] is selected)
Touch the playback date.
(When [EFFECT SETUP] is selected)
Touch the desired effect.≥When the effect setting is changed, music setting will 
be set the same as the effect setting. (To set the effect 
setting and music setting to different settings, change 
the music setting after setting the effect setting.)
≥  [SLIDE INTERVAL] cannot be set, when [EFFECT SETUP] is set.
[DATE SETUP]:
Select the date to be played back.
[EFFECT SETUP]: Select the effect for playback. ( l86)
[SLIDE INTERVAL]: Select the interval between still pictures at playback.
[MUSIC SELECT]: Select the music to be played on playback.
ALL
HDC-SD90&TM90-P-VQT3J56_mst.book  87 ページ  ２０１１年１月１３日　木曜日　午前９時１８分 
						

							88VQT3J56
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
(When [MUSIC SELECT] is selected)
Touch the desired sound.≥To adjust the volume of music during playback of the 
slide show or audio testing, operate the volume lever. 
(l 37)
≥ Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
4Touch [START].
5Select the playback operation. ( l36)≥When the playback is finished or stopped, the screen to select [REPLAY], 
[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.
[SHORT]:
Approx. 1 second
[NORMAL]: Approx. 5 seconds
[LONG]: Approx. 15 seconds
HDC-SD90&TM90-P-VQT3J56_mst.book  88 ページ  ２０１１年１月１３日　木曜日　午前９時１８分 
						

							89VQT3J56
¬Change the mode to  .
∫ To delete the scene or still picture being played back
Touch   while scenes or still pictures to be 
deleted are being played back.
∫ To delete scenes or still pictures from the thumbnail display
≥Switch to the thumbnail display of the scenes or still pictures to delete. ( l36)
1Touch . ( l26)≥When the thumbnail display is 1 scene display or Highlight & 
Time frame index, the scene or still picture being displayed is 
deleted.
2Touch [ALL SCENES], [MULTI] or [SINGLE].≥All the scenes or still pictures  displayed as thumbnails will be 
deleted by selecting [ALL SCENES].
(In case of playing back scenes or still pictures by date, all the 
scenes or still pictures on the selected date will be deleted.)
≥ Protected scenes/still pictures cannot be deleted.
3(When [MULTI] is selected in step 2)
Touch the scene/still picture to be deleted.≥When touched, the scene/still picture is selected and the   indication appears on the 
thumbnail. Touch the scene/still pict ure again to cancel the operation.
≥ Up to 99 scenes can be selected to be deleted.
(When [SINGLE] is selected in step 2)
Touch the scene/still picture to be deleted.
≥Touched scene or still picture is deleted.
4(When [MULTI] is selected in step 2)
Touch [Delete].
≥To continuously delete other scenes/still pictures, repeat steps 3-4.
Advanced (Playback)
Deleting scenes/still pictures
Deleted scenes/still pictures cannot be restored, so perform appropriate 
confirmation of the contents before proceeding with deletion.
0h01m30s0h01m30s0h01m30s
HDC-SD90&TM90-P-VQT3J56_mst.book  89 ページ  ２０１１年１月１３日　木曜日　午前９時１８分 
						

							90VQT3J56
When you stop deleting halfway:Touch [CANCEL] while deleting.
≥The scenes or still pictures that have already been deleted when the deletion is canceled 
cannot be restored.
To complete editing:Touch [Return].
≥You can also delete scenes by touching [MENU], selecting [EDIT SCENE]  # [DELETE] # 
[ALL SCENES], [MULTI] or [SINGLE].
≥ You can also delete still pictures by touching [MENU], selecting [PICT. SETUP]  # 
[DELETE]  # [ALL SCENES], [MULTI] or [SINGLE].
≥ During Highlight Playback or Disc Playback  when connected to a DVD burner (optional), 
scenes/still pictures cannot be deleted.
≥
Scenes that cannot be played back (the thumbnails are displayed as  ) cannot be deleted.≥In case of [ALL SCENES], the deletion may take time if there are many scenes or still pictures.≥ If you delete scenes recorded on other products or still pictures conforming to DCF 
standard with this unit, all the data related to the scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by other products are deleted, a still picture 
(other than JPEG) that cannot be played back on this unit may be erased.
Dividing a scene (AVCHD, 1080/60p)
It is possible to divide an AVCHD or 1080/60p scene. 
Any unwanted parts in the scene can be deleted after dividing.
≥Change the mode to   and touch the play mode select icon. Then, set [VIDEO/
PICTURE] to [1080/60p] or [AVCHD]. (l 36)
1Select the menu.
2Touch the scene to be divided.
3Touch   to set the dividing point.
≥Using slow-motion playback or frame-by-frame playback 
makes it easy to search for the point where you want to 
divide the scene. ( l80)
≥
Touch [YES] to continue dividing the same scene. To continue 
dividing other scenes, touch [NO] and repeat steps 2-3.
4Touch [Return] to complete dividing.≥ Unwanted parts can be deleted. ( l89)
To delete all the divided points
≥The scenes that were deleted after division cannot be recovered. : [EDIT SCENE] 
# [DIVIDE] #  [SET]
: [EDIT SCENE]  # [DIVIDE] #  [CANCEL ALL]
MENU
0h00m15s0h00m15s0h00m15s
MENU
HDC-SD90&TM90-P-VQT3J56_mst.book  90 ページ  ２０１１年１月１３日　木曜日　午前９時１８分