Panasonic Hdc Sd90 Owners Manual
Have a look at the manual Panasonic Hdc Sd90 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
86VQT3J56
∫Priority setting
1 Touch [FACE] or [FACE RECOG.].≥If you touch [FACE], any detected face, including the face of person registered for Face
Recognition, is given priority on playback.
2 (When [FACE RECOG.] is selected)
Touch a face to specify.
≥You can specify up to 6 faces, which are to be played
back in priority.
≥ When touched, the registered face is selected and
surrounded by red. Touch the registered face again to
cancel the operation.
≥ Touch [ENTER]. When a single face is specified,...](http://img.usermanuals.tech/thumb/58/64350/w64_hdc-sd90_mul_om_d-85.png "Page 86
86VQT3J56
∫Priority setting
1 Touch [FACE] or [FACE RECOG.].≥If you touch [FACE], any detected face, including the face of person registered for Face
Recognition, is given priority on playback.
2 (When [FACE RECOG.] is selected)
Touch a face to specify.
≥You can specify up to 6 faces, which are to be played
back in priority.
≥ When touched, the registered face is selected and
surrounded by red. Touch the registered face again to
cancel the operation.
≥ Touch [ENTER]. When a single face is specified,...")
![Page 87
87VQT3J56
∫Music setting
1 Touch your favorite music.≥When [EFFECT SETUP] is set to [NONE], you will be
able to select [NO MUSIC]. When [NO MUSIC] is
selected, the audio recorded at the time of shooting is
played back.
≥ To adjust the volume of music during playback or
audio testing, operate the volume lever. ( l37)
2 Touch [ENTER].
To test the music audio
Touch [START].
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
Changing the...](http://img.usermanuals.tech/thumb/58/64350/w64_hdc-sd90_mul_om_d-86.png "Page 87
87VQT3J56
∫Music setting
1 Touch your favorite music.≥When [EFFECT SETUP] is set to [NONE], you will be
able to select [NO MUSIC]. When [NO MUSIC] is
selected, the audio recorded at the time of shooting is
played back.
≥ To adjust the volume of music during playback or
audio testing, operate the volume lever. ( l37)
2 Touch [ENTER].
To test the music audio
Touch [START].
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
Changing the...")
![Page 88
88VQT3J56
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
(When [MUSIC SELECT] is selected)
Touch the desired sound.≥To adjust the volume of music during playback of the
slide show or audio testing, operate the volume lever.
(l 37)
≥ Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
4Touch [START].
5Select the...](http://img.usermanuals.tech/thumb/58/64350/w64_hdc-sd90_mul_om_d-87.png "Page 88
88VQT3J56
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
(When [MUSIC SELECT] is selected)
Touch the desired sound.≥To adjust the volume of music during playback of the
slide show or audio testing, operate the volume lever.
(l 37)
≥ Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
≥Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
4Touch [START].
5Select the...")
![Page 89
89VQT3J56
¬Change the mode to .
∫ To delete the scene or still picture being played back
Touch while scenes or still pictures to be
deleted are being played back.
∫ To delete scenes or still pictures from the thumbnail display
≥Switch to the thumbnail display of the scenes or still pictures to delete. ( l36)
1Touch . ( l26)≥When the thumbnail display is 1 scene display or Highlight &
Time frame index, the scene or still picture being displayed is
deleted.
2Touch [ALL SCENES], [MULTI] or...](http://img.usermanuals.tech/thumb/58/64350/w64_hdc-sd90_mul_om_d-88.png "Page 89
89VQT3J56
¬Change the mode to .
∫ To delete the scene or still picture being played back
Touch while scenes or still pictures to be
deleted are being played back.
∫ To delete scenes or still pictures from the thumbnail display
≥Switch to the thumbnail display of the scenes or still pictures to delete. ( l36)
1Touch . ( l26)≥When the thumbnail display is 1 scene display or Highlight &
Time frame index, the scene or still picture being displayed is
deleted.
2Touch [ALL SCENES], [MULTI] or...")
![Page 90
90VQT3J56
When you stop deleting halfway:Touch [CANCEL] while deleting.
≥The scenes or still pictures that have already been deleted when the deletion is canceled
cannot be restored.
To complete editing:Touch [Return].
≥You can also delete scenes by touching [MENU], selecting [EDIT SCENE] # [DELETE] #
[ALL SCENES], [MULTI] or [SINGLE].
≥ You can also delete still pictures by touching [MENU], selecting [PICT. SETUP] #
[DELETE] # [ALL SCENES], [MULTI] or [SINGLE].
≥ During Highlight Playback or Disc...](http://img.usermanuals.tech/thumb/58/64350/w64_hdc-sd90_mul_om_d-89.png "Page 90
90VQT3J56
When you stop deleting halfway:Touch [CANCEL] while deleting.
≥The scenes or still pictures that have already been deleted when the deletion is canceled
cannot be restored.
To complete editing:Touch [Return].
≥You can also delete scenes by touching [MENU], selecting [EDIT SCENE] # [DELETE] #
[ALL SCENES], [MULTI] or [SINGLE].
≥ You can also delete still pictures by touching [MENU], selecting [PICT. SETUP] #
[DELETE] # [ALL SCENES], [MULTI] or [SINGLE].
≥ During Highlight Playback or Disc...")
![Page 92
92VQT3J56
Deleting personal information
Deletes face recognition information from scenes in which faces were recognized.
≥Change the mode to and touch the play mode select icon. Then, set [VIDEO/
PICTURE] to [1080/60p] or [AVCHD]. (l 36)
≥ Personal information is not recorded in the iFrame scenes.
1Select the menu.
2Touch the desired scenes with personal information to be deleted.≥ appears at scenes for which faces were recognized. Touch one of the scenes where
appears.
≥ will change to (red)...](http://img.usermanuals.tech/thumb/58/64350/w64_hdc-sd90_mul_om_d-91.png "Page 92
92VQT3J56
Deleting personal information
Deletes face recognition information from scenes in which faces were recognized.
≥Change the mode to and touch the play mode select icon. Then, set [VIDEO/
PICTURE] to [1080/60p] or [AVCHD]. (l 36)
≥ Personal information is not recorded in the iFrame scenes.
1Select the menu.
2Touch the desired scenes with personal information to be deleted.≥ appears at scenes for which faces were recognized. Touch one of the scenes where
appears.
≥ will change to (red)...")
![Page 93
93VQT3J56
You can write the data selecting still pictures to be printed and the number of prints (DPOF
data) onto the SD card. (Copy still pictures recorded to the built-in memory to the SD card
before setting DPOF.)
¬Change the mode to and touch the play mode select icon. Then, set
[MEDIA] to [SD CARD] and set [VIDEO/PICTURE] to [PICTURE]. ( l36)
∫ What is DPOF?
DPOF (Digital Print Order Format) is a format which allows the user of a digital camera to
define which captured images on the SD card...](http://img.usermanuals.tech/thumb/58/64350/w64_hdc-sd90_mul_om_d-92.png "Page 93
93VQT3J56
You can write the data selecting still pictures to be printed and the number of prints (DPOF
data) onto the SD card. (Copy still pictures recorded to the built-in memory to the SD card
before setting DPOF.)
¬Change the mode to and touch the play mode select icon. Then, set
[MEDIA] to [SD CARD] and set [VIDEO/PICTURE] to [PICTURE]. ( l36)
∫ What is DPOF?
DPOF (Digital Print Order Format) is a format which allows the user of a digital camera to
define which captured images on the SD card...")
![Page 94
94VQT3J56
You can combine the relayed scene (l61) in the built-in memory and the continued
scene in the SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of Relay recording
≥ Change the mode to and touch the play mode select icon. Then, set [VIDEO/
PICTURE] to [1080/60p] or [AVCHD].
(l 36)
1Insert the SD card that was used for Relay recording.
2Select the menu.
3When the confirmation message appears, touch [YES].≥Scene in the built-in memory will be deleted. (Protected scenes in...](http://img.usermanuals.tech/thumb/58/64350/w64_hdc-sd90_mul_om_d-93.png "Page 94
94VQT3J56
You can combine the relayed scene (l61) in the built-in memory and the continued
scene in the SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of Relay recording
≥ Change the mode to and touch the play mode select icon. Then, set [VIDEO/
PICTURE] to [1080/60p] or [AVCHD].
(l 36)
1Insert the SD card that was used for Relay recording.
2Select the menu.
3When the confirmation message appears, touch [YES].≥Scene in the built-in memory will be deleted. (Protected scenes in...")
![Page 95
95VQT3J56
To cancel relay information
≥When the relay information is canceled, combining of the relayed scenes will not be
possible anymore.
≥When the disc playback is selected while a DVD burner (optional) is connected, you cannot
combine relay scenes or cancel relay information.
≥ The personal information of the relayed scene in the built-in memory or SD card is deleted,
the personal information of the combined relay scene is deleted. : [EDIT SCENE]
# [RELAY INFO CANCEL]
Combining of the relay...](http://img.usermanuals.tech/thumb/58/64350/w64_hdc-sd90_mul_om_d-94.png "Page 95
95VQT3J56
To cancel relay information
≥When the relay information is canceled, combining of the relayed scenes will not be
possible anymore.
≥When the disc playback is selected while a DVD burner (optional) is connected, you cannot
combine relay scenes or cancel relay information.
≥ The personal information of the relayed scene in the built-in memory or SD card is deleted,
the personal information of the combined relay scene is deleted. : [EDIT SCENE]
# [RELAY INFO CANCEL]
Combining of the relay...")
91VQT3J56 ≥You cannot divide a scene if you are playing back a disc with a DVD burner (optional) connected, or if the number of scenes of a given date would exceed 99 scenes. ≥ It may not be possible to divide scenes with a short recording time. ≥ Data that has been recorded or edited on another device cannot be divided and the divided points cannot be deleted. ≥ If personal information in the divided scenes is deleted, the personal information is deleted when the divided scenes are canceled. Dividing a scene to partially delete (iFrame) Divide the iFrame scene, and delete unnecessary parts. This divides the recorded scenes in two and deletes the front half or back half. The scenes deleted by dividing cannot be restored. ≥Change the mode to and touch the play mode select icon. Then, set [VIDEO/ PICTURE] to [iFrame]. (l 36) 1Select the menu. 2Touch the scene to be divided. 3Touch to set the dividing point.≥Using slow-motion playback or frame-by-frame playback makes it easy to search for the point where you want to divide the scene. ( l80) ≥ Set the dividing point so there will be 2 seconds or more for the part for deletion, and 3 seconds or more for the part to be kept. 4Touch the part for deletion. 5Touch [YES] and confirm (play back) the part for deletion.≥A confirmation message appears when [NO] is touched. Proceed to step 7. 6Stop the playback. ≥A confirmation message appears. 7Touch [YES].≥To continue dividing and deleti ng other scenes, repeat steps 2-7.To complete editingTouch [Return]. ≥It may not be possible to divide scenes with a short recording time. ≥ The actual division may slightly slip off the previously designated dividing point. : [EDIT SCENE] # [SPLIT&DELETE ]MENU 0h00m15s 0h00m15s 0h00m15s HDC-SD90&TM90-P-VQT3J56_mst.book 91 ページ ２０１１年１月１３日 木曜日 午前９時１８分
92VQT3J56 Deleting personal information Deletes face recognition information from scenes in which faces were recognized. ≥Change the mode to and touch the play mode select icon. Then, set [VIDEO/ PICTURE] to [1080/60p] or [AVCHD]. (l 36) ≥ Personal information is not recorded in the iFrame scenes. 1Select the menu. 2Touch the desired scenes with personal information to be deleted.≥ appears at scenes for which faces were recognized. Touch one of the scenes where appears. ≥ will change to (red) when touched. Touch the (red) again to cancel the operation. ≥ Up to 99 scenes can be selected in succession. 3Touch [Delete]. ≥To continuously delete other personal information, repeat steps 2-3. ≥ Touch [Return] to complete the settings. When you stop deleting halfwayTouch [CANCEL] while deleting personal information. ≥The personal information that has already been deleted when the deletion is canceled cannot be restored. ≥During Disc Playback when connected to a DVD burner (optional), scenes/still pictures cannot be deleted. Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them.) ≥ Change the mode to . 1Select the menu. 2Touch the scene/still picture to be protected. ≥When touched, the scene/still picture is selected and the indication appears on the thumbnail. Touch the scene/still pict ure again to cancel the operation. ≥ Touch [Return] to complete the settings. ≥When the disc playback is selected while a DVD burner (optional) is connected, scenes/ still pictures cannot be protected. : [VIDEO SETUP] # [DELETE PERSONAL INFO] : [VIDEO SETUP] or [PICT. SETUP] # [SCENE PROTECT] MENU MENU HDC-SD90&TM90-P-VQT3J56_mst.book 92 ページ ２０１１年１月１３日 木曜日 午前９時１８分
93VQT3J56 You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card. (Copy still pictures recorded to the built-in memory to the SD card before setting DPOF.) ¬Change the mode to and touch the play mode select icon. Then, set [MEDIA] to [SD CARD] and set [VIDEO/PICTURE] to [PICTURE]. ( l36) ∫ What is DPOF? DPOF (Digital Print Order Format) is a format which allows the user of a digital camera to define which captured images on the SD card are to be printed, together with information on the number of copies they wish to print. (Please note: Not all commercial printing services support this feature at this time.) 1Select the menu. 2Touch the still picture to be set. 3Touch / to set the number of prints. ≥ Up to 999 prints can be selected. (Prints for set number can be printed with a printer that supports DPOF.) ≥ To cancel the setting, set the number of prints to [0]. 4Touch [ENTER]. ≥To continuously set other still pictures, repeat steps 2-4. ≥ Touch [Return] to complete the settings. To cancel all DPOF settings ≥When the disc playback is selected while a DVD burner (optional) is connected, scenes/ still pictures cannot be set DPOF. ≥ You cannot add the recording date to pictures to be printed with the DPOF settings. Advanced (Playback) DPOF setting : [PICT. SETUP] # [DPOF SET] # [SET] : [PICT. SETUP] # [DPOF SET] # [CANCEL ALL]MENU MENU HDC-SD90&TM90-P-VQT3J56_mst.book 93 ページ ２０１１年１月１３日 木曜日 午前９時１８分
94VQT3J56 You can combine the relayed scene (l61) in the built-in memory and the continued scene in the SD card to be one into the SD card. A Built-in memory B SD card C Range of Relay recording ≥ Change the mode to and touch the play mode select icon. Then, set [VIDEO/ PICTURE] to [1080/60p] or [AVCHD]. (l 36) 1Insert the SD card that was used for Relay recording. 2Select the menu. 3When the confirmation message appears, touch [YES].≥Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are not deleted.) 4Touch [EXIT] when the relay scene combining complete message is displayed. ≥The thumbnail view of the SD card is indicated. ≥ Relay recording information will be delete d when the relay scenes are combined, and Relay recording will be possible again. ≥ When the relayed scenes in the built-in memory or SD card are deleted, combining of the relayed scenes will not be possible. Advanced (Playback) Relay scene combining [HDC-TM90] Relay-recorded sceneRelay scene combining : [EDIT SCENE] # [RELAY SCENE COMBINE] MENU HDC-SD90&TM90-P-VQT3J56_mst.book 94 ページ ２０１１年１月１３日 木曜日 午前９時１８分
95VQT3J56 To cancel relay information ≥When the relay information is canceled, combining of the relayed scenes will not be possible anymore. ≥When the disc playback is selected while a DVD burner (optional) is connected, you cannot combine relay scenes or cancel relay information. ≥ The personal information of the relayed scene in the built-in memory or SD card is deleted, the personal information of the combined relay scene is deleted. : [EDIT SCENE] # [RELAY INFO CANCEL] Combining of the relay scene cannot be performed if the available space on the SD card is less than the volume of the relayed scene in the built-in memory. It is recommended to combine the relay scene using a DVD burner or the HD Writer AE 3.0. MENU HDC-SD90&TM90-P-VQT3J56_mst.book 95 ページ ２０１１年１月１３日 木曜日 午前９時１８分
96VQT3J56 ≥Use the AV multi cable (supplied) or HDMI mini cable (optional) and check the output settings. ( l99) ≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high definition TV and then play back the recorded high definition images, you can enjoy them in high resolution with high quality sound. 1Connect this unit to a TV. Advanced (Playback) Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. A High quality 1 HDMI terminal 2 Component terminal 3 Video terminal AV MULTI AV MULTI AHDMI mini cable (optional) ≥ Be sure to connect to the HDMI terminal. B AV multi cable (supplied) Picture quality 1 High definition images when connecting to HDMI terminal 2 High definition images when connecting to component terminal compatible with 1080i Standard images when connecting to component terminal compatible with 480i 3 Standard images when connecting to video terminal HDC-SD90&TM90-P-VQT3J56_mst.book 96 ページ ２０１１年１月１３日 木曜日 午前９時１８分
97VQT3J56 ≥Check that the plugs are inserted as far as they go. ≥ Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other AV multi cables except the supplied one. ≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable is not required. ≥ When connecting to the AV terminal of the TV, do not connect the component terminal plug of the AV multi cable. Image may not display when the component terminal plug is connected simultaneously. 2Select the video input on the TV.≥Example: Select the [HDMI] channel with a HDMI mini cable. Select the [Component] or [Video 2] channel with an AV multi cable. (The name of the channel may differ depending on the connected TV.) ≥ Check the input setting (input switch) and the audio input setting on the TV. (For more information, please read the operating instructions for the TV.) 3Change the mode to to play back. ≥When the AV multi cable is connected to this unit, the setup screen of the AV multi destination is displayed on the screen of this unit. Touch either [COMPONENT] or [AV OUT] in accordance with the terminal connecting to the TV. ( l99) ≥ If the HDMI mini cable and AV multi cable are connected at the same time, output will be prioritized in order of the HDMI mini cable, AV multi cable. CablesReference items A HDMI mini cable (optional) ≥Connecting with a HDMI mini cable ( l99) ≥ Playback using VIERA Link ™ (l 100) B AV multi cable (supplied) ≥Connecting with the AV multi cable ( l99) HDC-SD90&TM90-P-VQT3J56_mst.book 97 ページ ２０１１年１月１３日 木曜日 午前９時１８分
98VQT3J56 ∫To watch images on a regular TV (4:3) or when both sides of the images do not appear on the screen Change the menu setting to display the images correctly. (Check the TV setting.) Example of images with a [16:9] aspect ratio on a regular TV (4:3) ≥If a wide-screen TV is connected, adjust the aspect setting on the TV. (Refer to the operating instructions of the TV for details.) ∫ To display the on-screen information on the TV When the menu setting is changed, the information displayed on the screen (operation icon and time code etc.) can be displayed/not displayed on the TV. [OFF]: Not displayed [SIMPLE]*: Information partially displayed [DETAIL]: All information displayed * This setting is only available in Recording Mode. : [SETUP] # [TV ASPECT] # [4:3] [TV ASPECT] setting [16:9][4:3] MENU: [SETUP] # [EXT. DISPLAY] # desired settingMENU Refer to the following support site for information about Panasonic TVs with an SD card slot for playing back your pictures. http://panasonic.net/ ≥ It may not be possible to play back scenes on the TV depending on the recording mode. ≥ For details on how to play back, please read the operating instructions for the TV. HDC-SD90&TM90-P-VQT3J56_mst.book 98 ページ ２０１１年１月１３日 木曜日 午前９時１８分
99VQT3J56 Connecting with a HDMI mini cable Select the desired method of HDMI output. ≥[AUTO] determines the output resolution automatically based on information from the connected TV. If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please read the operating instructions for the TV.) ≥ Image will not display on TV for a few seconds in the following cases. jWhen the 1080/60p recording mode is turned on/off during Motion Picture Recording Mode j When you touch the play mode select icon to select [1080/60p], and then touch [ENTER] during Playback Mode. Connecting with the AV multi cable AV multi connector output setting can be changed. Changing the component output setting : [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p] : [SETUP] # [AV MULTI] # desired setting [COMPONENT]:When connecting to the component terminal [AV OUT]:When connecting to the video terminal : [SETUP] # [COMPONENT OUT] # desired setting [480i]:When connecting to the component terminal on the TV compatible with 480i. (Playback is in standard quality.) [1080i]:When connecting to the component terminal on the TV compatible with 1080i. (Playback is in high definition quality.) MENU MENU MENU HDC-SD90&TM90-P-VQT3J56_mst.book 99 ページ ２０１１年１月１３日 木曜日 午前９時１８分
100VQT3J56 ¬Change the mode to . 1Select the menu. ≥If you are not using VIERA Link, set to [OFF]. 2Connect this unit to a Panasonic TV compatible with VIERA Link with a HDMI mini cable. A HDMI mini cable (optional) B Panasonic TV compatible with VIERA Link ≥ It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2 or more HDMI input terminals on the TV. ≥ VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV for how to set etc.) ≥ Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). Advanced (Playback) Playback using VIERA Link™ What is the VIERA Link (HDAVI Control™)? ≥ VIERA Link™ is a new name for EZ Sync™. ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.) ≥ VIERA Link is a unique Panasonic function built on a HDMI control function using the standard HDMI CEC (Consumer Electronics Control) specification. Linked operations with HDMI CEC compatible devices made by other companies are not guaranteed. When using devices made by other companies that are compatible with VIERA Link, refer to the operating instructions for the respective devices. ≥ This unit is compatible with VIERA Link Ver.5. VIERA Link Ver.5 is the newest Panasonic version and is also compatible with existing Panasonic VIERA Link devices. (As of Dec 2010) : [SETUP] # [VIERA Link] # [ON] MENU HDMI IN HDC-SD90&TM90-P-VQT3J56_mst.book 100 ページ ２０１１年１月１３日 木曜日 午前９時１８分