Panasonic Hdc Sd90 Owners Manual

31VQT3J56
≥The images recorded between pressing the recording start/stop button to start recording 
and pressing it again to pause recording become one scene.
When you record with the [REC MODE] set to [iFrame], the scenes longer than 
approximately 20 minutes will be automati cally divided. (Recording will continue.)
≥ (Maximum recordable scenes of a single SD card or built-in memory)
≥ Maximum number of recordable scenes and maximum number of different dates will be 
less than above table when there...

32VQT3J56
1Change the mode to  .
2Open the LCD monitor.
3Press the   button halfway. 
(For Auto focus only)
4Press the   button fully.
Focus indication:
≥ If you set the Optical image stabilizer function ( l48) to   ([MODE1]), then the Image 
Stabilizer function will be more effective. (  (MEGA Optical Image Stabilizer) will be 
displayed when the   button is pressed halfway.)
≥ In dark environments, the video light will turn on.
≥ Focus indication will change to registered focus icon when [FACE RECOG.]...

33VQT3J56
∫About the screen indications in Still Picture Recording
:Still picture operation indicator (l131)R3000: Remaining number of still pictures 
(Flashes in red when [0] appears.)
: Quality of still pictures ( l70)
: Size of still pictures ( l69)
:
MEGA optical image stabilizer (l 32): Optical image stabilizer ( l48)
: AF assist lamp ( l72)
ß : Flash ( l55)
ß j : Flash level ( l55)
: Red-eye reduction ( l56)
∫ About the focus indication
≥The focus indication indicates the status of the Auto focus....

34VQT3J56
The following modes (appropriate for the condition) are set just by pointing the unit to what 
you want to record.
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
≥ Depending on the recording conditions, the unit may not enter the desired mode.
≥ In the Portrait, Spotlight, or Low light mode, the face will be surrounded by a white frame 
when detected. In the Portrait mode, a subject that is bigger and close to center of the 
screen will be surrounded  by an...

35VQT3J56
≥Faces cannot be detected depending on the recording conditions, such as when faces are 
of certain sizes or at certain tilts or when digital zoom is used.
≥ [ZOOM MIC] is set to [OFF] in the Intelligent Auto Mode. ( l67)
∫ Intelligent Auto Mode
When switching to Intelligent Auto Mode, the Auto White Balance and Auto Focus operate 
and automatically adjust the color balance and focusing.
Depending on the brightness of the subject etc., the aperture and shutter speed are 
automatically adjusted...

36VQT3J56
1Change the mode to  .
2Touch the play mode select icon A. (l26)
3
Select the [VIDEO/PICTURE] you wish to 
play back.
≥ Touch [ENTER].
Select the [MEDIA] and [VIDEO/PICTURE] 
you wish to play back.
≥Touch [ENTER].
4Touch the scene or the still picture to be 
played back.
B is displayed when [1080/60p] is touched,   is 
displayed when [AVCHD] is touched or   is displayed 
when [
iFrame] is touched in step 3.≥ To display the next (previous) page:
jSlide the thumbnail display upward (downward)...

37VQT3J56
5Select the playback operation by touching the operation icon.
∫ Change the thumbnail display
While the thumbnail is displayed, the thumbnail display changes in the 
following order if the zoom lever is operated to   side or   side.
20 scenes  () 9 scenes  () 1 scene ()  Highlight & Time frame index* 
( l 82)
* Highlight & Time frame index can only set in Motion Picture Playback  Mode.
Even in Motion Picture Playback Mode, [F ACE] and [HIGHLIGHT] cannot be used when 
[iFrame] is selected.
≥ 9...

38VQT3J56
Motion picture compatibilityPlease refer to page 49 about 
1080/60p.
≥This unit is based on AVCHD format/MPEG-4 AVC file format.
≥ Video signals for the AVCHD that can be played back with this unit are 1920 k1080/60i, 
1920k 1080/24p and 1440k 1080/60i.
≥ Video signals for the iFrame that can be played back with this unit are 960 k540/30p.
≥ This unit may degrade or not play back motion pictures recorded or created on other 
products, and other products may degrade or not play back motion...

39VQT3J56
≥Touch   (left side)/   (right side) of   on the Touch Menu to display  . ( l26)
1Touch [MENU].
2Touch the top menu  A.
3Touch the submenu B.
≥Next (previous) page can be displayed by 
touching / .
4Touch the desired item to enter 
the setting.
5Touch [EXIT] to exit the menu 
setting.
∫ About  guide display
After touching  , touching the submenus 
and items will cause func tion descriptions 
and settings confirmation messages to 
appear.
≥ After the messages have been displayed, 
the guide...

40VQT3J56
≥The items displayed differ depending on the position or settings of the mode switch.
Select the menu. 
Please refer to page 27.
It is possible to display and record the time at the travel destination by selecting your home 
region and the travel destination.
1 Touch [SET WORLD TIME].≥If the clock is not set, adjust the clock to the current time. ( l27)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER] 
and proceed to Step 3.
2(Only when setting your home...