Panasonic Hdc Sd9 Operating Instructions
Here you can view all the pages of manual Panasonic Hdc Sd9 Operating Instructions. The Panasonic manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 51
51VQT1N45 Recording (Advanced) 2 Recording functions of menus ¬Operate the mode switch to select . ≥Set to [OFF] when the menus are not used. (Set [MIC SETUP] to [SURROUND] and [MIC LEVEL] to [AUTO].) Menus Guide line, 24p digital cinema, Wind noise reduction, Microphone setup, Microphone level, HD hi-speed burst shooting, Built-in flash, Red eye reduction, Shutter sound, Zebra, Color bar, Auto slow shutter, Digital cinema color FunctionEffect/Setting method Guide lineYou can check if the image is...
Page 52
52VQT1N45 FunctionEffect/Setting method Wind noise reductionThis is for reducing the wind noise coming into the built-in microphones depending on the wind strength. Select the menu. (l27) [VIDEO] # [WIND CUT] # [ON] ≥This function’s default setting is [ON]. Microphone setup [SURROUND]: Sound is recorded with 5.1 ch surround microphone. [ZOOM MIC]: Directivity of the microphone is synchronized with the zoom operation. Sounds near the front of the unit are recorded more clearly if you zoom in...
Page 53
53VQT1N45 Microphone level AGC: Auto Gain Control [AUTO]: AGC is activated, and the recording level is adjusted automatically. [SETrAGC]: The desired recording level can be set. AGC will also be activated to reduce the amount of sound distortion. [SET]: AGC is not activated and so natural recording can be performed.When recording, the input level from the built-in microphones can be adjusted.1Select the menu. (l27) [VIDEO] # [MIC LEVEL] # [SETrAGC] or [SET] ≥Set [MIC LEVEL] to [AUTO] to set the...
Page 54
54VQT1N45 HD hi-speed burst shooting72 still pictures are recorded at a rate of 24 per second. 1Select the menu. (l27) [PICTURE] # [HI-SPEED BURST] # [ON] 2Press the button. ≥Up to 72 still pictures can be taken in burst mode. ([ ] flashes in red during recording.) 3Select the setting to save with the cursor button and press the cursor button. [REC ALL]: All pictures are stored. [SELECT]: Pictures in the selected range are stored. [DEL ALL]: No picture is stored. ≥Select the thumbnails on the right...
Page 55
55VQT1N45 Built-in flashWhen the button is pressed, the flash is activated and the picture will be recorded. Use the built-in flash in order to record still pictures in dark places. Select the menu. (l27) [PICTURE] # [FLASH] # [AUTO] or [ON] ≥This function’s default setting is [AUTO]. ≥When the button is pressed halfway, the flash indicator will appear in the bottom left corner of the screen. [ON]:ß [AUTO]:ßA [OFF]: ≥When [AUTO] is set, the ambient brightness is automatically detected, and the...
Page 56
56VQT1N45 FunctionEffect/Setting method Shutter soundYou can add a shutter sound when recording still pictures. Select the menu. (l27) [PICTURE] # [SHTR SOUND] # [ON] ≥This function’s default setting is [ON]. Zebra AZebra patternParts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern). Select the menu. (l27) [ADVANCED] # [ZEBRA] # [ON] ≥You can record an image with little white saturation if you...
Page 57
57VQT1N45 24p digital cinema: ≥[Digital Cinema Color] is turned [ON] and is not changeable. ≥Motion pictures recorded while this setting is turned to [ON] may not be played back properly with a player that does not support 24p. Wind noise reduction: ≥ The sound quality may be changed if this function is activated in strong winds. However, the sound quality is automatically restored to the original quality when then the wind weakens. Microphone setup: ≥If [MIC SETUP] is set to [FOCUS MIC] or [ZOOM...
Page 58
58VQT1N45 ≥Image quality is different from ordinary still picture recording. To record more vivid still pictures, turn off this function before recording. (l41) ≥If you turn off the power or set the mode switch to , this function is canceled. Built-in flash: ≥Do not block the flash with your hand or by other means. ≥Set the flash to [OFF] where using a flash is prohibited. ≥Do not use the flash with the ND filter (optional) attached. ≥The unit automatically determines if the flash is necessary...
Page 59
59VQT1N45 Recording (Advanced) 3 Manual recording functions ¬Operate the mode switch to select . Set the AUTO/MANUAL/FOCUS switch to MANUAL. The icon shown in the illustration appears. When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. Select the menu. (l27)≥Set [SCENE MODE] to [OFF] or the AUTO/ MANUAL/FOCUS switch to AUTO to cancel the function. Sports mode ≥For slow-motion playback or playback pause of recorded pictures, this mode...
Page 60
60VQT1N45 Portrait mode ≥If this mode is used indoors, the screen may flicker. If so, change the scene mode setting to [OFF].Spotlight mode ≥If the recording subject is extremely bright, the subject may become washed out and the periphery extremely darkened. Surf & snow mode ≥If the subject is extremely bright, the recorded image may become washed out. If auto focusing is difficult due to the conditions, then use manual focus. ≥Set the AUTO/MANUAL/FOCUS switch to MANUAL. (l59) 1(When MF assist...