Panasonic Hdc Sd9 Operating Instructions

21VQT1N45
Open the LCD monitor and install the battery by inserting it in the direction 
shown in the figure.
Inserting/removing the battery
Removing the battery
Be sure to set the mode switch to OFF and 
check that the status indicator is off before 
removing the battery.
Move the BATTERY lever in the direction 
indicated by the arrow and remove the 
battery when unlocked.
AInsert the battery until it clicks and locks.
CAUTION
Danger of explosion if battery is incorrectly 
replaced. Replace only with...

22VQT1N45
≥Temperature: 25oC (77oF)/humidity: 60%
∫Charging time
∫Recording time
* The battery pack holder kit VW-VH04 (optional) is necessary.
≥These times are approximations.
≥The indicated charging time is for when the battery has been discharged completely. The charging 
time may vary depending on how the battery has been used. The charging time for the battery in hot/
cold environments or a battery that has not been used for long time may be longer than normal.
≥The actual recordable time refers to...

23VQT1N45
Important:
While the DC cable is connected to the AC adaptor, the battery will not charge.
≥Do not use the AC cable with any other equipment as it is designed only for this unit. Do not 
use the AC cable from other equipment with this unit.
1Connect the AC cable to the AC adaptor and the AC outlet.
2Connect the DC cable to the AC adaptor.
3Connect the DC cable to the DC input terminal [DC IN 9.3V].
Connecting to the AC outlet
ADC output terminal
HDCSD9P-VQT1N45_ENG.book  23 ページ  ２００７年１２月２６日　水曜日...

24VQT1N45
Setup
2
Preparation of SD cards
* The SD Speed Class Rating is the speed standard for successive writes.
≥4 GB or more Memory Cards that do not have 
the SDHC logo are not based on SD Memory 
Card Specifications.
≥When the write-protect 
switch A on SD card is 
locked, no recording, 
deletion or editing will be 
possible on the card.≥Keep the Memory Card out of reach of children 
to prevent swallowing. This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC...

25VQT1N45
Caution:
If the SD card is inserted or removed while the power is on, this unit may malfunction or the data 
recorded on the SD card may be lost.
1Set the mode switch to OFF. 
(l26)
≥Check that the status indicator has gone off.
2Open the SD card cover while 
sliding the SD CARD OPEN lever 
B.
3Insert/remove the SD card.
≥Face the terminal side C in the direction 
shown in the illustration and press it straight in 
as far as it will go.
≥Press the center of the SD card and then pull it...

26VQT1N45
Setup
3
Selecting a mode
(Turning the unit on/off)
Operate the mode switch to recording, playback or power OFF.
Turn on the power by sliding the mode switch to   or   while pressing 
the lock release button A.
The status indicator lights and the power turns on.
≥When the unit is turned on for the first time, a message asking you to set the date and time will 
appear. Select [YES] and set the date and time. (l30)
To turn off the power
Set the mode switch to OFF.
The status indicator goes off and...

27VQT1N45
Setup
4
Using the menu screen
Operate the displayed menu screens with the cursor button.
1Press the MENU button.
≥The menu displayed differs depending on the 
position of the mode switch.
2Select the top menu A and move 
the cursor button right or press 
the cursor button.
3Select the submenu item B and 
move the cursor button right or 
press the cursor button.
C Current settings on menus
4Select the desired setting and 
press the cursor button to enter 
the selection.
≥Move the cursor button...

28VQT1N45
You can select the language on the screen display and the menu screen.
1Press the MENU button, then select [LANGUAGE] and press the cursor 
button.
2Select [English] and press the cursor button.
Recording mode
∫[BASIC]
[SCENE MODE] (l59)
[D.ZOOM] (l44)
[GUIDE LINES] (l51)
[CLOCK SET] (l30)
[SET WORLD TIME] (l31)
∫[VIDEO]
[REC MODE] (l38)
[24pDIGITAL CINEMA] (l51)
[FADE COLOR] (l48)
[WIND CUT] (l52)
[MIC SETUP] (l52)
[MIC LEVEL] (l53)
[AGS] (l35)
∫[PICTURE]
[PICT.QUALITY] (l43)
[HI-SPEED BURST]...

29VQT1N45
[BEEP SOUND]
[LCD SET] (l32)
[COMPONENT OUT] (l82)
[HDMI RESOLUTION] (l81)
[VIERA Link] (l83)
[TV ASPECT] (l80)
[INITIAL SET]
[DEMO MODE]
∫[LANGUAGE] (l28)Playback mode
(
[] motion picture playback)
∫[VIDEO SETUP]
[REPEAT PLAY] (l68)
[RESUME PLAY] (l68)
[SCENE PROTECT] (l75)
*1
[GUIDE LINES] (l51)
∫[EDIT SCENE]
*1
[DIVIDE] (l74)
[DELETE] (l73)
∫[DISC SETUP]
*2
[FORMAT DISC] (l91)
[AUTO PROTECT] (l91)
[INFORMATION] (l91)
≥For any other menus that are not described 
above, refer to menus with the...

30VQT1N45
Setup
5
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Select [YES] and perform steps 2 to 4 below to set the date and time.
¬Operate the mode switch to select 
.
1Select the menu. (l27)
2Select the date or time to be set, 
then set the desired value with 
the cursor button.
≥The year will change as follows:
2000, 2001, ..., 2039, 2000, ...
≥The 12-hour system is used to display the time.
≥[ ] appears on the right...