Panasonic Hdc Sd600p Operating Instructions
Here you can view all the pages of manual Panasonic Hdc Sd600p Operating Instructions. The Panasonic manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
41VQT2U72
≥When the home region is set for the first time, the screen for selecting home/travel
destination appears after setting the home region successively. If the home region has
already been set once, execute the menu operation for Step 1.
5(Only when setting the region of your
travel destination)
Touch / to select your travel
destination and touch [ENTER].
≥Touch [SUMMER TIME SET] to set
daylight saving time. appears and
the summer time setting is turned on.
The clock and time difference...](http://img.usermanuals.tech/thumb/58/64345/w300_hdc-sd600p_en_om_d-40.png "Page 41
41VQT2U72
≥When the home region is set for the first time, the screen for selecting home/travel
destination appears after setting the home region successively. If the home region has
already been set once, execute the menu operation for Step 1.
5(Only when setting the region of your
travel destination)
Touch / to select your travel
destination and touch [ENTER].
≥Touch [SUMMER TIME SET] to set
daylight saving time. appears and
the summer time setting is turned on.
The clock and time difference...")
41VQT2U72 ≥When the home region is set for the first time, the screen for selecting home/travel destination appears after setting the home region successively. If the home region has already been set once, execute the menu operation for Step 1. 5(Only when setting the region of your travel destination) Touch / to select your travel destination and touch [ENTER]. ≥Touch [SUMMER TIME SET] to set daylight saving time. appears and the summer time setting is turned on. The clock and time difference...
Page 42
42VQT2U72 The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set to or . ≥Depending on the recording cond itions, start time may be longer than 1 second in Still Picture Recording Mode. ≥ In the Quick power on mode, the zoom magnification becomes 1 k. This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened. ≥ When in Quick start standby mode about 80% of the power used in Recording pause mode is being consumed, so the...
Page 43
![Page 43
43VQT2U72
Please refer to page 47.
The recording lamp lights up during recording and flashes when the unit receives a signal
from the remote control or when the Self-timer is counting down. When this is set to [OFF], it
does not light during recording.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.(Volume low)/ (Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. ( l124)
This makes it easier to...](http://img.usermanuals.tech/thumb/58/64345/w300_hdc-sd600p_en_om_d-42.png "Page 43
43VQT2U72
Please refer to page 47.
The recording lamp lights up during recording and flashes when the unit receives a signal
from the remote control or when the Self-timer is counting down. When this is set to [OFF], it
does not light during recording.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.(Volume low)/ (Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. ( l124)
This makes it easier to...")
43VQT2U72 Please refer to page 47. The recording lamp lights up during recording and flashes when the unit receives a signal from the remote control or when the Self-timer is counting down. When this is set to [OFF], it does not light during recording. Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this sound.(Volume low)/ (Volume high) 2 Beeps for 4 times When an error occurs. Check the sentence displayed on the screen. ( l124) This makes it easier to...
Page 44
![Page 44
44VQT2U72
It adjusts brightness and color density on the LCD monitor.
≥These settings will not affect the images actually recorded.
1Touch [LCD SET].
2 Touch the desired setting item.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
3 Touch / to adjust settings.
4 Touch [ENTER].
≥ Touch [EXIT] or press the MENU button to exit the menu
screen.
Please refer to page 97.
Please refer to page 97.
Please refer to page 97.
Please refer to page 98.
Please refer to page 96....](http://img.usermanuals.tech/thumb/58/64345/w300_hdc-sd600p_en_om_d-43.png "Page 44
44VQT2U72
It adjusts brightness and color density on the LCD monitor.
≥These settings will not affect the images actually recorded.
1Touch [LCD SET].
2 Touch the desired setting item.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
3 Touch / to adjust settings.
4 Touch [ENTER].
≥ Touch [EXIT] or press the MENU button to exit the menu
screen.
Please refer to page 97.
Please refer to page 97.
Please refer to page 97.
Please refer to page 98.
Please refer to page 96....")
44VQT2U72 It adjusts brightness and color density on the LCD monitor. ≥These settings will not affect the images actually recorded. 1Touch [LCD SET]. 2 Touch the desired setting item. [BRIGHTNESS]: Brightness of the LCD monitor [COLOR]: Color level of the LCD monitor 3 Touch / to adjust settings. 4 Touch [ENTER]. ≥ Touch [EXIT] or press the MENU button to exit the menu screen. Please refer to page 97. Please refer to page 97. Please refer to page 97. Please refer to page 98. Please refer to page 96....
Page 45
![Page 45
45VQT2U72
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l100, 108)≥When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/
transferred. ( l135)
≥Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
The amount of space...](http://img.usermanuals.tech/thumb/58/64345/w300_hdc-sd600p_en_om_d-44.png "Page 45
45VQT2U72
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l100, 108)≥When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/
transferred. ( l135)
≥Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
The amount of space...")
45VQT2U72 Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l100, 108)≥When formatting is complete, touch [EXIT] to exit the message screen. ≥ Perform a physical formatting of the SD card when the SD card is to be disposed/ transferred. ( l135) ≥Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to vibrations or shock. The amount of space...
Page 46
![Page 46
46VQT2U72
This item is used to start the unit demonstration.
(Only when the mode is at the or position)
If [DEMO MODE] is switched to [ON] when there is no SD card inserted, the demonstration
automatically starts.
If any operation takes place, the demonstration is canceled. However if no operations take
place for approx. 10 minutes, the demonstration automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or insert an SD card.
This item is used to start the Optical Image...](http://img.usermanuals.tech/thumb/58/64345/w300_hdc-sd600p_en_om_d-45.png "Page 46
46VQT2U72
This item is used to start the unit demonstration.
(Only when the mode is at the or position)
If [DEMO MODE] is switched to [ON] when there is no SD card inserted, the demonstration
automatically starts.
If any operation takes place, the demonstration is canceled. However if no operations take
place for approx. 10 minutes, the demonstration automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or insert an SD card.
This item is used to start the Optical Image...")
46VQT2U72 This item is used to start the unit demonstration. (Only when the mode is at the or position) If [DEMO MODE] is switched to [ON] when there is no SD card inserted, the demonstration automatically starts. If any operation takes place, the demonstration is canceled. However if no operations take place for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration, set [DEMO MODE] to [OFF] or insert an SD card. This item is used to start the Optical Image...
Page 47
![Page 47
47VQT2U72
Basic
Setup
3
Using with the remote
control
Select the menu.
1 Power on/off button [ ]
Unit can be turned on/off when the LCD
monitor is opened.
≥
Unit cannot be turned on by the power on/
off button when 36 hours have passed after
the unit is turned off. Press the power
button on the unit and turn the unit back on.
≥Unit cannot be turned off when it is
connected to the PC or the DVD burner.
2 Photoshot button [ ]
*
3 On-screen display button [EXT DISPLAY] ( l96)
4 Playback operation...](http://img.usermanuals.tech/thumb/58/64345/w300_hdc-sd600p_en_om_d-46.png "Page 47
47VQT2U72
Basic
Setup
3
Using with the remote
control
Select the menu.
1 Power on/off button [ ]
Unit can be turned on/off when the LCD
monitor is opened.
≥
Unit cannot be turned on by the power on/
off button when 36 hours have passed after
the unit is turned off. Press the power
button on the unit and turn the unit back on.
≥Unit cannot be turned off when it is
connected to the PC or the DVD burner.
2 Photoshot button [ ]
*
3 On-screen display button [EXT DISPLAY] ( l96)
4 Playback operation...")
47VQT2U72 Basic Setup 3 Using with the remote control Select the menu. 1 Power on/off button [ ] Unit can be turned on/off when the LCD monitor is opened. ≥ Unit cannot be turned on by the power on/ off button when 36 hours have passed after the unit is turned off. Press the power button on the unit and turn the unit back on. ≥Unit cannot be turned off when it is connected to the PC or the DVD burner. 2 Photoshot button [ ] * 3 On-screen display button [EXT DISPLAY] ( l96) 4 Playback operation...
Page 48
48VQT2U72 ∫Remote control usable range A Remote control sensor Distance: Within approx. 5 m (16 feet) Angle: Approx. 10 o up and 15 o down, left, and right ≥ The remote control is intended for indoor operation. Outdoors or under strong light, the unit may not operate properly even within the usable ranges. 1Press a direction button. ≥Selected item will become yellow. 2Select the item with the direction button. 3Confirm the selection by pressing the OK button. ≥Selection/confirmation of operation...
Page 49
![Page 49
49VQT2U72
Advanced
Recording
(Advanced)
1
Zoom in/out function
The maximum optical zoom ratio is 12k.
The default setting of the [ZOOM MODE] is [i.Zoom 18 k]. It can be extended to a maximum
of 18k during Motion Picture Recording Mode. ( l60)
¬ Change the mode to or .
If the number of the recording pixels is set to anything other than the maximum number of
recording pixels in Still Picture Recording Mode, the still picture can be recorded with a zoom
ratio of a maximum of 25 k without degrading...](http://img.usermanuals.tech/thumb/58/64345/w300_hdc-sd600p_en_om_d-48.png "Page 49
49VQT2U72
Advanced
Recording
(Advanced)
1
Zoom in/out function
The maximum optical zoom ratio is 12k.
The default setting of the [ZOOM MODE] is [i.Zoom 18 k]. It can be extended to a maximum
of 18k during Motion Picture Recording Mode. ( l60)
¬ Change the mode to or .
If the number of the recording pixels is set to anything other than the maximum number of
recording pixels in Still Picture Recording Mode, the still picture can be recorded with a zoom
ratio of a maximum of 25 k without degrading...")
49VQT2U72 Advanced Recording (Advanced) 1 Zoom in/out function The maximum optical zoom ratio is 12k. The default setting of the [ZOOM MODE] is [i.Zoom 18 k]. It can be extended to a maximum of 18k during Motion Picture Recording Mode. ( l60) ¬ Change the mode to or . If the number of the recording pixels is set to anything other than the maximum number of recording pixels in Still Picture Recording Mode, the still picture can be recorded with a zoom ratio of a maximum of 25 k without degrading...
Page 50
![Page 50
50VQT2U72
Advanced
Recording
(Advanced)
2
Optical Image Stabilizer
Function
Optical Image Stabilizer can stabilize the image without decreasing the image quality as
much.
¬Change the mode to or .
∫ Changing the Optical Image Stabilizer function when in Still Picture
Recording Mode
[MODE1]:
The function works all the time.
[MODE2]:
The function works when the button is pressed. We recommend you are recording
yourself or recording with a tripod in Still Picture Recording Mode.
≥When in [MODE1],...](http://img.usermanuals.tech/thumb/58/64345/w300_hdc-sd600p_en_om_d-49.png "Page 50
50VQT2U72
Advanced
Recording
(Advanced)
2
Optical Image Stabilizer
Function
Optical Image Stabilizer can stabilize the image without decreasing the image quality as
much.
¬Change the mode to or .
∫ Changing the Optical Image Stabilizer function when in Still Picture
Recording Mode
[MODE1]:
The function works all the time.
[MODE2]:
The function works when the button is pressed. We recommend you are recording
yourself or recording with a tripod in Still Picture Recording Mode.
≥When in [MODE1],...")
50VQT2U72 Advanced Recording (Advanced) 2 Optical Image Stabilizer Function Optical Image Stabilizer can stabilize the image without decreasing the image quality as much. ¬Change the mode to or . ∫ Changing the Optical Image Stabilizer function when in Still Picture Recording Mode [MODE1]: The function works all the time. [MODE2]: The function works when the button is pressed. We recommend you are recording yourself or recording with a tripod in Still Picture Recording Mode. ≥When in [MODE1],...