Panasonic Hdc Sd600p Operating Instructions

31VQT2U72
Basic
Recording/
Playback
3
Recording still pictures
1Change the mode to  .
2Open the LCD monitor.
3Press the   button halfway. 
(For Auto focus only)
4Press the   button fully.
Focus indication:
≥ If you set the Optical image stabilizer function ( l50) to  /  (MODE1), then the 
Image Stabilizer function will be more effective. (  (MEGA Optical Image Stabilizer) 
will be displayed when the   button is pressed halfway.)
≥ The AF assist lamp lights in dark places.
≥ Focus indication will change...

32VQT2U72
∫About the screen indications in 
Still Picture Recording
:Still picture operation indicator 
(l122)ß: Flash ( l56)
ß j : Flash level ( l56)
: Red-eye reduction ( l56)
:
MEGA optical image stabilizer 
(l 31): Optical image stabilizer ( l50)
: Quality of still pictures ( l73)
: Size of still pictures ( l72)
R3000: Remaining number of still pictures
(Flashes in red when [0] appears.)
: AF assist lamp ( l75)
∫ About the focus indication
≥The focus indication indicates the status of 
the Auto...

33VQT2U72
Basic
Recording/
Playback
4
Intelligent Auto Mode
The following modes appropriate for the condition are set just by pointing the unit to what you 
want to record.
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
≥Depending on the recording conditions, the unit may not enter the desired mode.
≥ In the Portrait, Spotlight and Low light mode, a subject that is bigger and close to center of 
the screen will be surrounded by an orange frame. ( l65)
≥ Using a tripod is...

34VQT2U72
≥Optical Image Stabilizer function ( l50) is set to Active Mode/ON in all modes.
≥ Faces cannot be detected depending on the recording conditions, such as when faces are 
of certain sizes or at certain tilts or when digital zoom is used.
≥ The zoom microphone is set to [OFF] in the Intelligent Auto Mode. ( l67)
∫ Intelligent Auto Mode
When switching to Intelligent Auto Mode, the 
Auto White Balance and Auto Focus operate 
and automatically adjust the color balance 
and focusing.
Depending on...

35VQT2U72
Basic
Recording/
Playback
5
Motion picture/Still 
picture playback
1Change the mode to  .
2Touch the play mode select icon A.
3Touch [VIDEO/SD CARD] or [PICTURE/SD CARD].
4Touch the scene or the still picture to be 
played back.
≥Next (previous) page can be displayed by touching 
/. A
[VIDEO/SD CARD]
B [PICTURE/SD CARD]


HDC-SD600-P-VQT2U72_mst.book  35 ページ  ２０１０年４月１４日　水曜日　午後３時２８分 

36VQT2U72
5Select the playback operation by touching the operation icon.
∫ Play back 1080/60p recorded scenes ( l52)
≥Change the mode to   and touch the play mode select icon.
1 Touch [SELECT VIDEO].A  appears.
≥ The motion picture media switches between 
normal and 1080/60p recorded scenes each 
time [SELECT VIDEO] is touched.
2 Touch [VIDEO/SD CARD].
≥Scenes recorded in normal and 1080/60p cannot be viewed at the same time.
≥ The thumbnails are displayed on separate screens in Motion Picture Playback...

37VQT2U72
∫Change the thumbnail display
While the thumbnail is displayed, the 
thumbnail display changes in the following 
order if the zoom lever or adjust zoom 
buttons are operated to   side or   
side.
20 scenes  () 9 scenes  () 1 scene
()  Highlight&Time frame index* ( l82)
* Highlight&Time frame index can only set  in Motion Picture Playback Mode.
≥ 9 scenes display returns if the unit is 
turned off or the mode is changed.
≥ When the thumbnail display is changed to 
1 scene during motion picture...

38VQT2U72
Basic
Setup
1
Using the menu screen
1Press the MENU button.
2Touch the top menu A.
3Touch the submenu B.
≥Next (previous) page can be displayed by 
touching / .
4Touch the desired item to enter 
the setting.
5Touch [EXIT] or press the 
MENU button to exit the menu 
setting.
∫ About  guide display
After touching  , touching the submenus 
and items will cause func tion descriptions 
and settings confirmation messages to 
appear.
≥ After the messages have been displayed, 
the guide display is...

39VQT2U72
This allows quick setting of some of the 
menus.
1Press the Q.MENU button.The following menus can be set. 
Touch the desired menu.
≥The items displayed differ depending on 
the position of the mode switch or settings.
2Touch the desired item to enter 
the setting.
3Touch [EXIT] or press Q.MENU 
button to exit the quick menu.
Using the quick menu
IconFunctionPage
[REC MODE] l60
[TIME LAPSE 
REC] l
61
/ [PICTURE SIZE]
l72
[DISPLAY] l40
[POWER LCD] l43
[GUIDE LINES] l58
[MIC LEVEL] l68
[MF ASSIST]...

40VQT2U72
Basic
Setup
2
Using the Setup Menu
≥The items displayed differ depending on the position or settings of the mode switch.
Select the menu.
The screen indications are selected as 
shown in the illustration.
≥It is possible to set from the quick menu. 
(l 39)
Please refer to page 27.
It is possible to display and record the time at the travel destination by selecting your home 
region and the travel destination.
1 Touch [SET WORLD TIME].≥ If the clock is not set, adjust the clock to the current...