Panasonic Hdc Sd600p Operating Instructions

121VQT2U72
Others
Indications
1
Indications
∫Recording indications
Motion Picture Recording Mode
Still Picture Recording Mode
Remaining battery power 
(l 21)
1h30m Remaining battery time 
(l 21)
R 1h20m Remaining time for motion 
picture recording ( l30)
0h00m00s Elapsed recording time 
(l 30)
NOV 15 2010
12:34PM Date indication (
l27)
Time indication ( l27)
World time setting ( l40)
///
Motion picture recording mode ( l60)
1080/60p recording ( l52)
 (White)
 (Green) Card recording possible 
status...

122VQT2U72
∫Playback indications/ Smile Shot (l 55)
Microphone Level ( l68)
Backlight Compensation 
( l 57)
Soft Skin Mode ( l57)
Tele Macro ( l58)
/ Fade (White), Fade (Black) 
(l 54)
Color Night Rec function 
( l 58)
Intelligent Contrast Control 
( l 54)
Intelligent Exposure ( l57)
99% Luminance Level ( l70)
±  (White)/ ¥ (Green)/ / / / /
Focus indication ( l31)
Ø10/ Ø2 Self-Timer Recording (l 57)
ß /ß A/ Flash (l56)
ß i /ß j Flash Level ( l56)
Red-Eye Reduction ( l56)
/ Picture Quality ( l73)
//// / /...

123VQT2U72
∫Indication of connection to 
other devices
∫ Confirmatory indications
∫ Confirmatory indications when 
a DVD burner is connected
Accessing the card ( l11 7 )
–– (Time 
display) The built-in battery is low. 
(
l 27)
Warning recording yourself 
( l 26)
Disc Playback ( l105)
Scene copied in [Standard]([XP])
Scene copied in [Standard]([SP])
//////
Disc type ( l100)
Unusable disc
XP
SP
HDC-SD600-P-VQT2U72_mst.book  123 ページ  ２０１０年４月１４日　水曜日　午後３時２８分 

124VQT2U72
Others
Indications
2
Messages
Major confirmation/error messages to be indicated on the screen in text.
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion pictures and still pictures are recorded on 
an SD card, the card may be unstable. Reinse rt the SD card, then turn the unit off and 
then on again.
THIS BATTERY CANNOT BE USED.
≥ Use a battery that is compatible with this unit. ( l18)
If using a Panasonic battery...

125VQT2U72
If faulty management information is found, the messages may appear and a repair is 
performed. (Repairing may take time depending on the error.)
≥The above message is displayed when abnormal management information is detected 
when the scenes are displayed in thumbnail. To perform the repair, touch the scene with 
 in the thumbnail, and start the playback. Please be aware that if the repair fails, 
scenes with   will be deleted.
≥ Use a sufficiently charged battery or the AC adaptor.
≥...

126VQT2U72
Others
Troubleshooting
ProblemCheck points
This unit cannot be 
turned on.
This unit does not stay 
on long enough.
Battery runs down 
quickly. ≥
Charge the battery again to ensure it is sufficiently 
charged. ( l18)
≥ In cold places, the battery using time becomes 
shorter.
≥ The battery has a limited life. If the operating time is 
still too short even after the  battery is fully charged, 
the battery has worn out and needs to be replaced.
This unit is turned off 
automatically. ≥
If the...

127VQT2U72
ProblemCheck points
Item other than the 
touched one is 
selected. ≥
Calibrate the touch screen. ( l45)
The remote control 
does not function. ≥
[REMOTE CONTROL] of the [SETUP] is [OFF]. 
(l 47)
≥ The button-type battery of the remote control may 
have run out. Replace it with a new button-type 
battery. ( l47)
The remaining time 
indication or the 
elapsed time 
indication is not 
shown. ≥
[DISPLAY] of the [SETUP] is [OFF]. ( l40)
The unit arbitrarily 
stops recording. ≥
Use an SD card that...

128VQT2U72
Although this unit is 
correctly connected to 
a TV, images cannot 
be seen.
The images are 
squeezed horizontally.≥
Please read the operating instructions of your TV 
and select the channel that matches the input used 
for the connection.
≥ Change the [TV ASPECT] setting to match the 
aspect ratio of the TV. ( l96)
≥ Change the setting of the unit depending on the 
cable connecting to the TV. ( l97)
Scenes cannot be 
deleted. ≥
Release the protect setting. ( l92)
≥ Any scenes/still pictures...

129VQT2U72
Object seems to be 
warped.≥
Object seems to be warped slightly when the object 
moves across the image very fast, but this is 
because the unit is using MOS for the image sensor. 
This is not a malfunction.
White round spots like 
soap bubbles appear 
on the recorded 
picture. ≥
If you take a picture 
with the flash in a dark 
place or indoors, white 
round spots may 
appear on the picture 
caused by the flash 
reflecting of particles of dust in the air. This is not a 
malfunction.
A...

130VQT2U72
When connected by 
the USB cable, this 
unit is not detected by 
the PC.≥
After re-inserting the SD card into the unit, reconnect 
the supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. ( l111 )
≥ Connect the supplied USB cable again after 
restarting the PC and turning on this unit again.
When the USB cable is 
disconnected, an error 
message will appear 
on the PC. ≥
To disconnect the USB cable safely, double-click the 
 icon in the task tray and...