Panasonic Hdc Sd60 Operating Instructions

61VQT2M51
Set the maximum zoom ratio for the Motion Picture Recording Mode.
≥Change the mode to  .
≥ The larger the digital zoom magnification, the more the image quality is degraded.
Switch the picture quality of the motion pictures to be recorded.
≥ Change the mode to  .
A Favors image quality
B Favors recording time
≥Recordable time using the battery (l 24)
≥ This function’s default setting is HG mode.
≥ Please refer to page 140 
for details about approximate recordable time.
≥ When the unit is moved...

62VQT2M51
It is possible to continuously record motion picture to an SD card when there is no space 
available in the built-in memory. (It allows you to record only to SD card from built-in memory.)
≥Change the mode to  .
≥  is displayed on the screen.    will disappear when space in the built-in memory is 
gone and the recording to the SD card starts.
≥ Relay recording can only be performed once.
≥ Combine the scenes that were relay
-recorded using the [RELAY SCENE COMBINE] 
into the SD card. ( l92,...

63VQT2M51
∫Registering a face for face recognition
≥Up to a maximum of 6 people can be registered.1 Align the person’s face with the guide.≥Take a picture of the persons face from the front, 
ensuring that their hair does not hide the outline of 
their face, their eyes or their eyebrows.
2 Touch [REC] or press the   button fully.≥Touch [ENTER].
≥ It may not be possible to register a face depending 
on the recording conditions. In this case, try 
recording the face again.
3 Entering the person’s...

64VQT2M51
∫Changing the information of a registered person
1 Select the menu.
2 Touch the desired item to enter the setting.
≥Up to 3 face shots can be registered. To additionally register 
or to change/delete the registered face shots, touch   or 
the face shot.
[SET NAME]:
Change the name.
[PRIORITY]:
Focus and exposure will be set in  priority according to the 
registration order setting from the first person. Target will be 
locked according to the registration order setting from the first 
person...

65VQT2M51
When a registered person is detected by face recognition during recording, the name 
registered for that person is displayed.
≥Change the mode to   or  .
≥Displayed name will disappear after a while.
≥ It is displayed according to the registration order setting from the first person.
≥ This function is not displayed during recording of yourself or Playback Mode.
Detected faces appear with frames.
≥ Change the mode to   or  .
≥ Up to 15 frames are indicated. Larger faces and faces nearer to the...

66VQT2M51
If the unit continues to be tilted upside down from the normal horizontal position while 
recording motion pictures, it is automatically put into recording pause.
≥Change the mode to  .
≥The AGS function may activate and cause the unit to pause the recording if you are 
recording a subject right above or right below you.
You can record bright pictures even in dark places by slowing the shutter speed.
≥ Change the mode to  .
≥ Switch to Manual Mode. ( l74)
≥ The shutter speed is set to 1/30 or...

67VQT2M51
Message is displayed when this unit is moved rapidly.
≥Change the mode to  .
When “CAMERA PANNING IS TOO FAST.” appears, 
move the unit slowly  while recording.
≥ Set to [OFF] to turn off the message indication.
≥Message will not appear while pausing the recording. (Message will appear even if it is 
pausing the recording if [DEMO MODE] is set to [ON].)
≥ In some recording conditions, messages may not appear.
This will reduce the wind noise coming into th e built-in microphones while...

68VQT2M51
When recording, the input level from the built-in microphones can be adjusted.
≥Change the mode to  .
≥ Switch to Manual Mode. ( l74)
1 Select the menu.
2 Touch  /  to adjust the microphone input 
level.
≥Touch   to activate/disactivate AGC. 
When AGC is activated, the icon is surrounded by 
yellow and the amount of sound distortion can be 
reduced. When AGC is disactivated, natural recording 
can be performed.
≥ Adjust the microphone input level so that the last 2 bars 
of the gain value are...

69VQT2M51
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
≥Change the mode to   or  .
≥ Switch to Manual Mode. ( l74)
1 Select the menu.
2 Touch the desired setting items.
3 Touch  /  to adjust settings.
4 Touch [ENTER].
≥Touch [EXIT] or press the MENU button to complete the settings.
≥  appears on the screen.
[PICTURE ADJUST]
: [RECORD SETUP]  # [PICTURE ADJUST]
[SHARPNESS]:Sharpness of the edge
[COLOR]:Depth of the color of the...

70VQT2M51
The higher the number of pixels, the higher the clarity of the picture when printing.
≥Change the mode to  .
≥ The number of recording pixels that can be set changes depending on selected screen 
aspect ratio. ( l71)
∫ Picture size and Maximum 
zoom ratio
* Extra optical zoom cannot be used. The 
maximum zoom magnification is 25 k.
∫ Picture size in Motion Picture 
Recording Mode
≥Change the mode to  .
≥This function’s default settings are   in Still Picture Recording Mode and   in Motion...