Panasonic Hdc Sd20 Operating Instructions

							81VQT1Y00
A single frame from the recorded motion picture 
can be saved as a still picture.
1Pause at the scene you want to 
save as a still picture during 
playback.
≥It is convenient to use slow-motion playback 
and frame-by-frame playback.
2Press the   button fully.
Still picture is recorded.
(/
Still picture is recorded and will be saved on the 
same media as the motion picture.)
≥Date the motion picture was recorded will be 
registered as date of the still picture.
≥ Quality will be different from the normal still 
picture. An image of one scene is displayed as a 
thumbnail at set time interval. Scene can be 
played back from any midway point of the scene 
you wish to see.
≥
Move the zoom lever to  i side and change 
over the thumbnail display to Highlight&Time 
frame index. ( l79)
1Touch the set time selection.
A Set time selection
B Scene selection
≥ Next (previous) scene can be displayed by 
touching / .
2Touch and select time to be set.
≥A portion judged to be clearly recorded will be 
detected and displayed in thumbnail if you 
select [HIGHLIGHT]. The thumbnail may not 
be displayed if the part recognized as clearly 
recorded cannot be detected.
3Touch the thumbnail to be played 
back.
≥Next (previous) thumbnail can be displayed by 
touching / .
Creating still picture from 
motion pictureHighlight&Time frame index
/P
HDCSD20&SD25&HS20P-VQT1Y00_eng.book  81 ページ  ２００８年１２月２２日　月曜日　午後８時１６分 
						

							82VQT1Y00
Scenes recorded on the same day can be played 
back in succession.
1Touch the date select icon.
ADate select icon
2Touch the playback date.
The scenes recorded on the date selected are 
displayed as thumbnails.
3Touch the scene to be played 
back.
≥Playing back of all the scenes returns if the 
power is turned off or the mode is changed.
≥ Even if scenes are recorded on the same day, 
they are grouped separately in the following 
cases.
jWhen the number of scenes exceeds 99
j When the media is repaired
j When the setting of [DIGITAL CINEMA] is 
turned on/off*
j When the recording mode is changed from 
HA/HG/HX to HE
* or HE to HA/HG/HX*
* –1, –2... is added after the recording date 
displayed on the screen. Playback the scenes excluding a portion of the 
scene judged to have failed to shoot due to fast 
movement of this unit, camera shake, or focus 
error.
1Touch .
2Touch [INTEL. SCENE].
3Touch the scene to be played 
back.
≥
Up to 9 sections can be skipped for a single 
scene.
≥ When motion pictures are skipped, the image 
stops momentarily.
≥ The position of sections to be skipped may 
vary depending on the type of recording, with 
some having no skipped parts.
≥ Divided scene will not be skipped.
≥ Playing back all the scenes returns if the power 
is turned off or the mode is changed.
≥ For data that are edited with the easy editing 
function of HD Writer AE 1.0, the Intelligent 
scene selection is disabled.
≥ Deletion of scenes cannot be done during the 
Intelligent scene selection.
≥ Highlight&Time frame index display does not 
appear.
Playing back motion 
pictures by date
NOV 15  2009
NOV 12  2009
NOV 10  2009
Intelligent scene selection
HDCSD20&SD25&HS20P-VQT1Y00_eng.book  82 ページ  ２００８年１２月２２日　月曜日　午後８時１６分 
						

							83VQT1Y00
Part that was recognized as clearly recorded is 
extracted from a long recording, and it can be 
played back in short time with music added.
1Touch .
2Touch [HIGHLIGHT].
3Touch the desired item.
[SCENE SETUP]:
Select the scene or date to be played back.
[PLAYBACK TIME]:
Select the time to playback.
 (l84)
[MUSIC SELECT]:
Select the music to be played on playback. (l84)
4Touch [START].
≥ The playback time is displayed, and the unit is 
put into playback pause.
5Select the playback operation. 
(l 79)
≥When the playback is finished or stopped, the 
screen to select [REPLAY], [SELECT AGAIN] 
or [EXIT] is displayed.
Touch the desired item.
∫ Scene setting
1) Touch [SELECT SCENES] or 
[SELECT DATE].
2) (When [SELECT SCENES] is selected) Touch the scene to be played back.
≥ Up to 99 scenes can be selected in 
succession.
≥ When touched, the scene is selected and   is 
displayed. Touch the scene again to cancel the 
operation.
3) (When [SELECT DATE] is selected) Touch the date to be played back.
≥ A maximum of 7 days can be selected.
≥ When touched, the date is selected and 
surrounded by red.
Touch the date again to cancel the operation.
4) Touch [Enter]/[ENTER] to complete the  settings.Highlight playback
NOV 15  2009
NOV 12  2009NOV 10  2009NOV 08  2009
HDCSD20&SD25&HS20P-VQT1Y00_eng.book  83 ページ  ２００８年１２月２２日　月曜日　午後８時１６分 
						

							84VQT1Y00
∫Playback time setting
1) Touch the playback time to set.
≥The playback time of [AUTO] is a maximum of 
approx. 5 minutes.
≥ Playback time may become shorter than the 
setting, or it may not even play back if the part 
recognized as clearly recorded is short.
∫ Music setting
1) Touch your favorite music.
≥When [NO MUSIC] is selected, the audio 
recorded at the time of shooting is played back.
2) Touch [ENTER].
To test the music audio:
1) Touch [START] and start the audio testing.
≥ Touch the other music option to change the 
music to be tested.
≥ When you touch [STOP], the music playback 
stops.
≥ When you touch [ENTER], the music being 
tested is set.
≥The scene in the vicinity of the split may not 
play back when the scene is split.
≥ Playing back of all the scenes returns if the 
power is turned off or the mode is changed. Playback of the first scene starts after playback 
of the last scene finishes.
Select the menu. (
l34)
The   indication appears on the full screen 
views.
≥All the scenes are played back repeatedly. 
(When playing back motion pictures by date, 
all the scenes on the selected date are played 
back repeatedly.)
If playback of a scene was stopped halfway, the 
playback can be resumed from where it was 
stopped.
Select the menu. ( l34)
If playback of a motion picture is stopped,   
appears on the thumbnail view of the stopped 
scene.
≥This function’s default setting is [ON].
≥The memorized resume position is cleared if 
you turn off the power or change the mode.
(The setting of [RESUME PLAY] does not 
change.)
Repeat playback
[VIDEO SETUP]  # [REPEAT PLAY]  # [ON]
Resuming the previous 
playback
[VIDEO SETUP]  # [RESUME PLAY]  # [ON]
HDCSD20&SD25&HS20P-VQT1Y00_eng.book  84 ページ  ２００８年１２月２２日　月曜日　午後８時１６分 
						

							85VQT1Y00
Playback
Playback
2
Still picture playback
1Change the mode to  .
2Touch the play mode select icon 
C to select desired media to be 
played back.
≥ Touch [PICTURE/SD CARD] to play back the 
SD card.
Touch [PICTURE/Built-in Memory] to play back 
the built-in memory.
Touch [PICTURE/HDD] to play back the HDD.
3Touch the still picture to be 
played back.
The selected still picture is played back on the 
full screen, and the operation icon is 
automatically displayed on the screen.
≥Next (previous) page can be displayed by 
touching / .
HDC-SD20
HDC-TM20
≥ Operate the mode switch while at the same 
time pressing in the lock release button if 
changing from OFF to another mode.
A Lock release button
OFF
HDC-HS20
≥Rotate the mode dial while at the same 
time pressing in the lock release button if 
changing from OFF to another mode.
A Lock release button
B Align with the status indicator.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book  85 ページ  ２００８年１２月２２日　月曜日　午後８時１６分 
						

							86VQT1Y00
4Select the playback operation by 
touching the operation icon.
1/; : Slide show (playback of the still pictures 
in numerical order) start/pause.
2; : Plays back the previous picture.
;1 : Plays back the next picture.
∫ : Stops the playback and shows the 
thumbnails.
≥ Operation icon disappears if no playback 
operation is performed for about 3 seconds. It 
will be displayed again if you touch the screen.
∫ Change the thumbnail display
During step 3, the thumbnail display changes in 
the following order if the zoom lever is operated 
to 
_ side or ` side.
20 still pictures () 9 still pictures 
()
 1 still picture
≥ 9 still pictures display returns if the power is 
turned off or the mode is changed.
∫ Changing the playback settings 
for the slide show
1) Touch .
2) Touch the interval of playback for the slide 
show.
[SHORT]: 
Approx. 1 sec
[NORMAL]: 
Approx. 5 sec
[LONG]:
Approx. 15 sec
3) Touch the desired sound.
≥ During slide show or audio testing, speaker 
volume can be adjusted by the volume lever. 
(l 79)
(To test the music audio)
Touch [START] and start the audio testing.
≥ Touch the other music option to change the 
music to be tested.
≥ When you touch [STOP], the music playback 
stops.
4) Touch [ENTER].
WT
/ VOL
HDCSD20&SD25&HS20P-VQT1Y00_eng.book  86 ページ  ２００８年１２月２２日　月曜日　午後８時１６分 
						

							87VQT1Y00
≥Any still pictures where the thumbnails are 
displayed as   cannot be played back.
≥ During still picture playback, the power will not 
turn off even if the LCD monitor is closed. Still pictures recorded on the same day can be 
played back in succession.
1Touch the date select icon.
A
Date select icon
2Touch the playback date.
The still pictures recorded on the date selected 
are displayed as thumbnails.
3Touch the still picture to be 
played back.
≥Playing back of all the still pictures returns if 
the power is turned off or the mode is changed.
≥ Even if still pictures are recorded on the same 
day, they are grouped separately in the 
following cases.
jWhen the number of still pictures exceeds 
999
j When pictures are recorded in Hi-speed 
Burst Shooting mode (  is indicated after 
the date in the list by date).
≥  is displayed after the date in the list by date 
for the still pictures created from the motion 
picture. ( l81)
Still picture compatibility
≥This unit is compliant with the unified 
standard DCF (Design rule for Camera File 
system) established by JEITA (Japan 
Electronics and Information Technology 
Industries Association).
≥ The file format of still pictures supported by 
this unit is JPEG. (Not all JPEG formatted 
files will be played back.)
≥ This unit may degrade or not play back still 
pictures recorded or created on other 
products and other products may degrade 
or not play back still pictures recorded on 
this unit.Playing back still pictures 
by date
HDCSD20&SD25&HS20P-VQT1Y00_eng.book  87 ページ  ２００８年１２月２２日　月曜日　午後８時１６分 
						

							88VQT1Y00
Playback
Editing
1
Deleting scenes/still pictures
¬Change the mode to  .
∫ Deleting multiple scenes/still pict ures from the thumbnail display
1Press the   button while the 
thumbnail view screen is 
displayed.
2Touch [SELECT] or [ALL 
SCENES].
≥When [ALL SCENES] is selected, all the 
scenes or still pictures on the selected media 
will be deleted. When the confirmation 
message appears, touch [YES].
(In case of playing back scenes or still pictures 
by date, all the scenes or still pictures on the 
selected date will be deleted.)
≥ Protected scenes/still pictures cannot be 
deleted.
3(Only when [SELECT] is selected in step 2)
Touch the scene/still picture to 
be deleted.
≥When touched, the scene/still picture is 
selected and the   indication appears on the 
thumbnail. Touch the scene/still picture again 
to cancel the operation.
≥ Up to 99 scenes can be selected to be deleted.
4(Only when [SELECT] is selected in step 2)
Touch [Delete] or press the   
button.
≥When the confirmation message appears, 
touch [YES].
Deleted scenes/still pictures cannot be restored, 
so perform appropriate confirmation of the 
contents before proceeding with deletion.
0h00m00s 0h00m00s
0h00m00s
To delete by confirming 
images being played back
Press the   button while scenes or 
still pictures to be deleted are being 
played back.
≥ When the confirmation message 
appears, touch [YES].
HDCSD20&SD25&HS20P-VQT1Y00_eng.book  88 ページ  ２００８年１２月２２日　月曜日　午後８時１６分 
						

							89VQT1Y00
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-4.
When you stop deleting halfway
Touch [CANCEL] or press the MENU button 
while deleting.
≥The scenes or still pict ures that have already 
been deleted when the deletion is canceled 
cannot be restored.
To complete editing
Press the MENU button.
≥ You can also delete scenes by pressing the 
MENU button, selecting [EDIT SCENE]  # 
[DELETE]  # [ALL SCENES] or [SELECT].
≥ You can also delete still pictures by pressing 
the MENU button, selecting [PICT. SETUP]  # 
[DELETE]  # [ALL SCENES] or [SELECT].
≥ When the Intelligent Scene Selection or 
Highlight Playback is selected, scenes cannot 
be deleted.
≥ To delete an unwanted part of a scene, divide 
the scene first, and then delete the 
unnecessary part. ( l90)
≥ Scenes/still pictures which cannot be played 
back (the thumbnails are displayed as  ) 
cannot be deleted.
≥ In case of [ALL SCENES], the deletion may 
take time if there are many scenes or still 
pictures.
≥ When you delete scenes/still pictures, use a 
battery with sufficient battery power or use the 
AC adaptor.
≥ If you delete scenes recorded on other 
products or still pictures conforming to DCF 
standard with this unit, all the data related to 
the scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by 
other products are deleted,  a still picture (other 
than JPEG) that cannot be played back on this 
unit may be erased.
HDCSD20&SD25&HS20P-VQT1Y00_eng.book  89 ページ  ２００８年１２月２２日　月曜日　午後８時１６分 
						

							90VQT1Y00
Playback
Editing
2
Dividing a scene to partially 
delete
To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary 
portion.
¬Change the mode to  .
1Touch the play mode select icon 
to select the desired media to 
divide a scene. 
(l 78)
2Select the menu. ( l34)
3Touch the scene to be divided.
4Touch   to set the dividing 
point.
≥Using slow-motion playback or frame-by-frame 
playback makes it easy to search for the point 
where you want to divide the scene. ( l79)
≥ When the confirmation message appears, 
touch [YES].
≥ Touch [YES] to continue dividing the same 
scene. To continue dividing other scenes, 
touch [NO] and repeat steps 3-4.
5Press the MENU button to 
complete dividing.
6Delete the unnecessary scene. 
(l 88)
To delete all the divided points
≥When the confirmation message appears, 
touch [YES].
≥ All divided points set on this unit will be 
canceled.
≥ The scenes that were deleted after division 
cannot be recovered.
≥When [INTEL. SCENE] is selected, scenes 
cannot be divided.
≥ Scenes cannot be divided if the number of 
scenes played back on a selected date has 
reached 99.
≥ It may not be possible to divide scenes with a 
short recording time.
≥ Data that has been recorded or edited on 
another device cannot be divided and the 
divided points cannot be deleted.
[EDIT SCENE]  # [DIVIDE] # [SET]
0h00m00s 0h00m00s
0h00m00s
[DIVIDE] # [CANCEL ALL]
HDCSD20&SD25&HS20P-VQT1Y00_eng.book  90 ページ  ２００８年１２月２２日　月曜日　午後８時１６分