Panasonic Hdc Sd100 Operating Instructions

71VQT1T64
The automatic white balance function may not reproduce natural colors depending on the scenes or 
lighting conditions. If so, you can adjust the white balance manually.
≥Set the AUTO/MANUAL switch to MANUAL. (l64)
1Press the camera function button 
and select [WHITE BALANCE] by 
rotating the ring. (l69)
2Enter the selection by pressing 
the camera function button.
3Select the white balance mode by 
rotating the ring.
≥Select the optimal mode by confirming the 
color on the screen.
4Enter the...

72VQT1T64
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥Set the AUTO/MANUAL switch to MANUAL. (l64)
1Press the camera function button 
and select [SHUTTER SPEED] or 
[IRIS] by rotating the ring. (l69)
2Enter the selection by pressing 
the camera function button.
3Adjust by rotating the ring.
AShutter speed:
1/60 to 1/8000
≥If [AUTO SLOW SHTR] is set to [ON], the 
shutter speed will be set between 1/30 and 
1/8000.
≥If [24pDIGITAL...

73VQT1T64
Preparation
Recording
Playback
Backup
With a PC
Others
74Playback
82Editing
88With a TV
HDCSD100P-VQT1T64_ENG.book  73 ページ  ２００８年７月１４日　月曜日　午後８時２分 

74VQT1T64
Playback
1
Motion picture playback
ALock release button
BAlign with the mark.
≥Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF 
to another mode.
1Rotate the mode dial to select 
.
2Select [ ] (motion picture 
playback) with the cursor button.
CMotion picture playback
3Select the scene to be played 
back and press the cursor 
button.
DThumbnail display
EPrevious page
FNext page
GPlay mode select button
HScene number
The selected scene is...

75VQT1T64
≥The scene number display switches to the 
page number, except when thumbnails are 
selected.
≥Press the cursor button while selecting the play 
mode select button to switch to the thumbnails 
of the following scenes.
 (All scenes):
Playback of all scenes
 (By date):
Playback of scenes recorded on a selected date 
(l77)
 (Intelligent scene selection):
Playback of the detected scenes that have been 
recorded vividly (l78)
4Select the playback operation 
with the cursor button.
1/;:...

76VQT1T64
∫Slow-motion playback
1 Pause the playback.
2 Move and hold the cursor button right. 
(Move and hold the cursor button left to 
play back slow-motion pictures in 
reverse.)
It will playback in slow-motion while moving the 
cursor button.
≥Normal playback is restored when you move 
the cursor button up.
≥When slow-motion pictures are played back in 
reverse, they will be shown continuously at 
approximately 2/3
rd the speed of normal 
playback (intervals of 0.5 seconds).
Operating with the...

77VQT1T64
A single frame from the recorded motion picture 
can be saved as a still picture.
1Pause at the scene you want to 
save as a still picture during 
playback.
≥It is convenient to use slow-motion playback 
and frame-by-frame playback.
2Press the   button fully.
Still picture is recorded.
≥You might get a blurry still picture if you press 
the   button without pausing.
≥Date the motion picture was recorded will be 
registered as date of the still picture. (The date 
still picture was created will...

78VQT1T64
Motion pictures are played back after excepting 
some parts that may not have been recorded 
clearly such as image shaking or out-of-focus 
scenes.
1Select  (Intelligent scene 
selection), then press the cursor 
button.
2Select the scene to be played back, 
then press the cursor button.
≥Select   (All scenes) and press the cursor 
button to return to the playback of all scenes.
≥Select   (By date) and press the cursor 
button to activate the Intelligent scene 
selection on the selected date....

79VQT1T64
Playback
2
Still picture playback
ALock release button
BAlign with the mark.
≥Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF 
to another mode.
1Rotate the mode dial to select 
.
2Select [ ] (still picture 
playback) with the cursor button.
CStill picture playback
3Select the still picture to be 
played back and press the cursor 
button.
DPlay mode select button
EThumbnail display
FPrevious page
GNext page
HStill picture number
IFolder/file...

80VQT1T64
≥The picture number display switches to the 
page number, except when thumbnails are 
selected.
≥Select the play mode select button and press 
the cursor button to switch the following picture 
displays to thumbnail view.
 (All scenes):
Playback of all still pictures
 (By date):
Playback of still pictures recorded on a selected 
date (l81) 
4Select the playback operation 
with the cursor button.
1/;: Slide show (playback of the still pictures 
in numerical order) start/pause.
2;: Plays back the...