Panasonic Hdc Sd100 Operating Instructions

121VQT1T64
∫Playback indications12tZoom magnification indication 
(l49)
Zoom microphone (l59)
Focus microphone (l59)
Wind noise reduction (l65)
Microphone level (l66)
Headphone (l31)
Automatic face detection 
(l55)
Backlight compensation (l53)
Soft skin mode (l55)
Tele macro (l55)
, Fade (White), Fade (Black) 
(l53)
MagicPix function (l55)
Intelligent contrast control 
(l54)
99%Luminance level (l68)
± (White)
¥ (Green)Focus indication (l46)
Ø10, Ø2Self-Timer recording (l54)
ß/ßA/Flash (l61)
ßi/ßjFlash...

122VQT1T64
∫PC connection indications
∫Confirmatory indications
∫Confirmatory indications when a 
DVD burner is connected
PictBridgeWhen a printer compatible 
with PictBridge is connected 
(l105)
1DPOF already set
(to more than 1) (l86)
Protected motion pictures/still 
pictures (l85)
Number of recording pixels for 
still pictures (l48)
1920k1080
The picture size is not displayed for still 
pictures recorded with other products that have 
different picture sizes from the sizes shown 
above.
Accessing the...

123VQT1T64
Indications
2
Messages
Major confirmation/error messages to be indicated on the LCD monitor or the viewfinder in text.
CANNOT BE USED DUE TO INCOMPATIBLE DATA.
CANNOT RECORD - INCOMPATIBLE CONTROL DATA.
The recording format of the SD card is different so it cannot be used. Save the data on the SD card 
to a PC, then use the SD card after formatting it on this unit.
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion...

124VQT1T64
If faulty management information is found when an SD card is accessed, one of the following messages 
may appear. Be sure to follow directions in the messages. (Repairing may take time depending on the 
error.)
≥The following message is displayed when abnormal management information is detected when the 
scenes are displayed in thumbnail. To perform the repair, select the scene with [°] in the thumbnail 
using the cursor button, and start the playback. Please be aware that if the repair fails,...

125VQT1T64
Helpful hints
1
Functions that cannot be 
used simultaneously
Some functions in this unit are disabled or cannot be selected due to the unit’s specifications.
FunctionsConditions which disable the functions
Motion picture recording≥When the HD hi-speed burst shooting mode is on
PRE-REC
Microphone setup≥An external microphone is used.
Wind noise reduction
Digital zoom≥When 24p digital cinema is used
≥When the HD hi-speed burst shooting mode is on
Intelligent auto mode≥When setting the...

126VQT1T64
FunctionsConditions which disable the functions
Guide lines≥When the automatic face detection mode is used
24p digital cinema≥When the motion picture recording mode is HX/HE
≥When the digital zoom is set to [30k] or [700k]
HD hi-speed burst shooting mode≥When the digital zoom is set to [30k] or [700k]
Shutter sound≥While recording motion pictures
≥When PRE-REC is used
Flash≥While recording motion pictures
≥When PRE-REC is used
≥When the MagicPix function is used
≥When the HD hi-speed burst...

127VQT1T64
Helpful hints
2
Troubleshooting
ProblemCheck points
This unit cannot be 
turned on.
This unit does not stay 
on long enough.
Battery runs down 
quickly.≥Charge the battery using the AC adaptor. (l22)
≥The battery protection circuit may have operated. Attach 
the battery to the AC adaptor for 5 to 10 seconds. If the unit 
still cannot be used, the battery is faulty.
≥Make sure the LCD monitor is opened.
≥The battery is affected by ambient temperature. In cold 
places, the battery using time...

128VQT1T64
ProblemCheck points
This unit cannot be 
operated though it is 
turned on.
This unit does not 
operate normally.≥The unit will not operate unless the LCD monitor is opened 
when the LCD/EVF select switch is set to LCD.
≥Turn on the power again. If normal conditions are not 
restored yet, remove the battery or AC adaptor, wait about 
1 minute and then reconnect the battery or AC adaptor. 
Then about 1 minute later, turn on the power again. 
(Conducting the above operation while the SD card is...

129VQT1T64
Some playback images 
are skipped 
automatically.
Scene does not playback 
to the end.≥The playmode is set to   (Intelligent scene selection). 
Change the playmode to   (All scenes). (l78)
Although this unit is 
correctly connected to a 
TV, images cannot be 
seen.
The images are squeezed 
horizontally.≥Please read the operating instructions of your TV and 
select the channel that matches the input used for the 
connection.
≥Change the [TV ASPECT] setting to match the aspect ratio 
of the TV....

130VQT1T64
The indication 
disappears.
The screen is frozen.
No operation can be 
performed.≥No operation can be performed on this unit when it is 
connected to a PC.
≥Turn off the power to this unit. If the power cannot be turned 
off, remove the battery or AC adaptor and then reattach it. 
Turn on the power again. If normal operation is still not 
restored, detach the power connected, and contact 
consumer support. (l148, 149)
Color or brightness of the 
image changes, or you 
may see horizontal bars...