Panasonic Hdc Sd100 Operating Instructions

11VQT1T64
Features
∫Very clear high definition pictures
This unit can record detailed high definition images to an SD card.
High definition images (1920k1080)
*
ANumber of available scan lines 1080Standard images (720k480)
BNumber of available scan lines 480
High definition images
≥High definition images have more than approximately 2 times the number of available scan lines and 
approximately 6 times* the number of pixels compared with standard images.
≥The still pictures above are images for...

12VQT1T64
Quick Guide
∫Charging the battery
1) Connect the AC cable to the AC adaptor and 
the AC outlet.
2) Insert the battery into the battery charger by 
aligning the arrows.
∫Inserting the battery
Install the battery by inserting it in the direction 
shown in the figure.
AInsert the battery until it clicks and locks.
∫How to turn on the power
Turn on the power by turning the mode dial to 
 or   while pressing the lock release 
button A.
≥Rotate the mode dial while at the same time 
pressing in the...

13VQT1T64
∫Language selection
1) Press the MENU button, then select 
[LANGUAGE] and press the cursor button.
2) Select [English] and press the cursor button.
∫Help mode
The help mode explains the operation icons 
displayed. (Except headphone volume 
adjustment)
≥Rotate the mode dial to select  .
1) Press the cursor button to display the icon.
2) Move the cursor button right to select [ ].
3) Move the cursor button up, left or right to 
select the desired icon.
≥An explanation of the selected icon scrolls...

14VQT1T64
∫Motion picture playback
1) Rotate the mode dial to select  .
2) Select [ ] (motion picture playback) A 
with the cursor button.
3) Select the scene to be played back and 
press the cursor button.
4) Select the playback operation with the cursor 
button.
1/;: Playback/Pause
6: Rewind playback
5: Fast forward playback
∫: Stops the playback and shows the 
thumbnails.
∫Still picture playback
1) Rotate the mode dial to select  .
2) Select [ ] (still picture playback) A with 
the cursor button.
3)...

15VQT1T64
Preparation
Recording
Playback
Backup
With a PC
Others
16Before using
22Setup
HDCSD100P-VQT1T64_ENG.book  15 ページ  ２００８年７月１４日　月曜日　午後８時２分 

16VQT1T64
Before using
1
Parts identification and 
handling
1 LCD monitor open
2 LCD monitor (l35)
Pull the LCD monitor out in the direction of the 
arrow with your fingers.
≥It can open up to 90o.
≥It can rotate up to 180o A towards the lens or 
90o B towards the viewfinder.3 Speaker
4 Optical image stabilizer button [ , 
O.I.S.] (l50)
5 Delete button [ ] (l82)
6 Cursor button
Use the cursor button to select the recording 
functions and playback operations, and to 
operate the menu screen.
1Select by...

17VQT1T64
7 Intelligent auto button [iA] (l51)
8 PRE-REC button [PRE-REC] (l45)
9 Menu button [MENU] (l29)
10 Battery holder (l23)
11 DC input terminal [DC IN] (l25)
12 USB terminal [ ] (l96, 105, 115)
13 HDMI mini connector [HDMI] (l88, 93)
14 Audio-video/headphone output terminal 
[AV/ ] (l31, 56, 88, 104)
≥Use the AV cable (only the supplied cable) or 
headphones.
≥Setup the [AV JACK] in the menu when the 
headphones are used. (l31)
15 Component terminal [COMPONENT] 
(l88)
16 Card access lamp [ACCESS]...

18VQT1T64
31 Mode dial (l28)
32 Recording start/stop button (l41)
33 Status indicator (l28)
34 LCD/EVF select switch [EVF/LCD] (l35)
35 Viewfinder (l35)
36 Eyepiece corrector dial (l36)
37 Photoshot button [ ] (l46)
38 Zoom lever [W/T] (In recording mode) 
(l49)
Volume lever [sVOLr] (In playback 
mode) (l75)39 Accessory shoe
≥The video DC light/VW-LDC103PP (optional) 
should be mounted here.
40 Internal microphones (5.1 channel 
support)
31 323334 35
36
37
3839
40
41
42
Due to limitations in LCD...

19VQT1T64
41 Grip belt
Adjust the length of the grip belt so that it fits your 
hand.
1Flip the belt.
2Adjust the length.
3Replace the belt.
42 Shoulder strap fixture
43 Battery release lever [BATTERY] (l23)
44 Tripod receptacle
This is a hole for attaching the unit to the optional 
tripod. (For details on mounting the tripod, refer 
to the operating instructions for the tripod.)
ACamera base
4344
HDCSD100P-VQT1T64_ENG.book  19 ページ  ２００８年７月１４日　月曜日　午後８時２分 

20VQT1T64
1 Photoshot button [ , PHOTO SHOT]*
2 On-screen display button [EXT DISPLAY] 
(l90)
3 Date/time button [DATE/TIME] (l33)
4 Playback operation buttons (l75)
5 Delete button [ ]
*
6 Direction buttons [3,4,2,1]
These buttons operate similar to how the cursor 
button moves up/down/right/left on the unit.
7 Recording start/stop button [START/
STOP]
*
8 Zoom/volume buttons [ZOOM, VOL]*
9 Menu button [MENU]*
10 Enter button [ENTER]
This button operates similar to pressing the 
cursor button on the...