Panasonic Hdc Sd1 Operating Instructions
Here you can view all the pages of manual Panasonic Hdc Sd1 Operating Instructions. The Panasonic manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
71VQT1A24
Playback
Recorded scenes are grouped by date on this
unit.
Scenes recorded on the same day can be played
back in succession.
1Press the MENU button, then
select [PLAY SETUP]
#
[PLAY MODE]
# [BY DATE] and
press the cursor button.
2Select the date for playback, then
press the cursor button.
The scenes recorded on the same day are
displayed as thumbnails.
3Select the scene to be played
back.
To return to playing back all the scenes
Press the MENU button, then select
[PLAY SETUP] # [PLAY...](http://img.usermanuals.tech/thumb/58/64341/w300_hdc-sd1_mul_om_d-70.png "Page 71
71VQT1A24
Playback
Recorded scenes are grouped by date on this
unit.
Scenes recorded on the same day can be played
back in succession.
1Press the MENU button, then
select [PLAY SETUP]
#
[PLAY MODE]
# [BY DATE] and
press the cursor button.
2Select the date for playback, then
press the cursor button.
The scenes recorded on the same day are
displayed as thumbnails.
3Select the scene to be played
back.
To return to playing back all the scenes
Press the MENU button, then select
[PLAY SETUP] # [PLAY...")
71VQT1A24 Playback Recorded scenes are grouped by date on this unit. Scenes recorded on the same day can be played back in succession. 1Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [BY DATE] and press the cursor button. 2Select the date for playback, then press the cursor button. The scenes recorded on the same day are displayed as thumbnails. 3Select the scene to be played back. To return to playing back all the scenes Press the MENU button, then select [PLAY SETUP] # [PLAY...
Page 72
![Page 72
72VQT1A24
Playback
If playback of a scene was stopped halfway, the
playback can be resumed from where it was
stopped.
Press the MENU button, then select
[PLAY SETUP]
# [RESUME PLAY] #
[ON] and press the cursor button.
If playback of a motion picture is stopped, [ ]
appears on the thumbnail view of the stopped
scene.
To cancel the resume playback function
Press the MENU button, then select
[PLAY SETUP] # [RESUME PLAY] # [OFF]
and press the cursor button.
≥The memorized resume position is cleared...](http://img.usermanuals.tech/thumb/58/64341/w300_hdc-sd1_mul_om_d-71.png "Page 72
72VQT1A24
Playback
If playback of a scene was stopped halfway, the
playback can be resumed from where it was
stopped.
Press the MENU button, then select
[PLAY SETUP]
# [RESUME PLAY] #
[ON] and press the cursor button.
If playback of a motion picture is stopped, [ ]
appears on the thumbnail view of the stopped
scene.
To cancel the resume playback function
Press the MENU button, then select
[PLAY SETUP] # [RESUME PLAY] # [OFF]
and press the cursor button.
≥The memorized resume position is cleared...")
72VQT1A24 Playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. Press the MENU button, then select [PLAY SETUP] # [RESUME PLAY] # [ON] and press the cursor button. If playback of a motion picture is stopped, [ ] appears on the thumbnail view of the stopped scene. To cancel the resume playback function Press the MENU button, then select [PLAY SETUP] # [RESUME PLAY] # [OFF] and press the cursor button. ≥The memorized resume position is cleared...
Page 73
73VQT1A24 Playback ≥If 9 or more files have been recorded, the next (or previous) page can be displayed by moving the cursor button left and right or moving the cursor button down, selecting / by moving the cursor button left and right and then pressing the center of the cursor button. ≥The file number display switches to the page number when the still picture playback tab or / is selected. 4Press the cursor button. The selected file is played back on the full screen. ≥The operation icon is...
Page 74
![Page 74
74VQT1A24
Editing
Editing
Editing scenes
The deleted scenes cannot be restored.
¬
Rotate the mode dial to select
and then select the (motion
picture playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the cursor button.
¬Rotate the mode dial to select
and then select the (motion
picture playback) tab.
1Press the button while the
thumbnail view screen is
displayed.
2Move the cursor button up or
down to select [ALL SCENES]...](http://img.usermanuals.tech/thumb/58/64341/w300_hdc-sd1_mul_om_d-73.png "Page 74
74VQT1A24
Editing
Editing
Editing scenes
The deleted scenes cannot be restored.
¬
Rotate the mode dial to select
and then select the (motion
picture playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the cursor button.
¬Rotate the mode dial to select
and then select the (motion
picture playback) tab.
1Press the button while the
thumbnail view screen is
displayed.
2Move the cursor button up or
down to select [ALL SCENES]...")
74VQT1A24 Editing Editing Editing scenes The deleted scenes cannot be restored. ¬ Rotate the mode dial to select and then select the (motion picture playback) tab. 1Press the button during playback. 2When the confirmation message appears, select [YES], then press the cursor button. ¬Rotate the mode dial to select and then select the (motion picture playback) tab. 1Press the button while the thumbnail view screen is displayed. 2Move the cursor button up or down to select [ALL SCENES]...
Page 75
![Page 75
75VQT1A24
Editing
4(Only when [SELECT] is selected in step 2)
Press the button.
5When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥Scenes which cannot be played back (the
thumbnails are displayed as ) cannot be
deleted.
≥Protected scenes cannot be deleted.
≥Do not open the card slot cover while deleting.
The deletion will...](http://img.usermanuals.tech/thumb/58/64341/w300_hdc-sd1_mul_om_d-74.png "Page 75
75VQT1A24
Editing
4(Only when [SELECT] is selected in step 2)
Press the button.
5When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥Scenes which cannot be played back (the
thumbnails are displayed as ) cannot be
deleted.
≥Protected scenes cannot be deleted.
≥Do not open the card slot cover while deleting.
The deletion will...")
75VQT1A24 Editing 4(Only when [SELECT] is selected in step 2) Press the button. 5When the confirmation message appears, select [YES], then press the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other scenes Repeat steps 3-5. To complete editing Press the MENU button. ≥Scenes which cannot be played back (the thumbnails are displayed as ) cannot be deleted. ≥Protected scenes cannot be deleted. ≥Do not open the card slot cover while deleting. The deletion will...
Page 76
![Page 76
76VQT1A24
Editing
Editing still pictures
The deleted files cannot be restored.
¬
Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the cursor button.
¬Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the button while the
thumbnail view screen is
displayed.
2Move the cursor button up or
down to select [ALL SCENES] or...](http://img.usermanuals.tech/thumb/58/64341/w300_hdc-sd1_mul_om_d-75.png "Page 76
76VQT1A24
Editing
Editing still pictures
The deleted files cannot be restored.
¬
Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the button during
playback.
2When the confirmation message
appears, select [YES], then press
the cursor button.
¬Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the button while the
thumbnail view screen is
displayed.
2Move the cursor button up or
down to select [ALL SCENES] or...")
76VQT1A24 Editing Editing still pictures The deleted files cannot be restored. ¬ Rotate the mode dial to select and then select the (still picture playback) tab. 1Press the button during playback. 2When the confirmation message appears, select [YES], then press the cursor button. ¬Rotate the mode dial to select and then select the (still picture playback) tab. 1Press the button while the thumbnail view screen is displayed. 2Move the cursor button up or down to select [ALL SCENES] or...
Page 77
![Page 77
77VQT1A24
Editing
5When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other files
Repeat steps 3-5.
To complete editing
Press the MENU button.
ªDeleting still picture files
recorded on an SD card by other
products
A still picture file (other than JPEG) that cannot
be played back on this unit may be erased.
≥Protected files cannot be deleted.
≥Do not open the card slot cover while deleting.
The deletion...](http://img.usermanuals.tech/thumb/58/64341/w300_hdc-sd1_mul_om_d-76.png "Page 77
77VQT1A24
Editing
5When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other files
Repeat steps 3-5.
To complete editing
Press the MENU button.
ªDeleting still picture files
recorded on an SD card by other
products
A still picture file (other than JPEG) that cannot
be played back on this unit may be erased.
≥Protected files cannot be deleted.
≥Do not open the card slot cover while deleting.
The deletion...")
77VQT1A24 Editing 5When the confirmation message appears, select [YES], then press the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other files Repeat steps 3-5. To complete editing Press the MENU button. ªDeleting still picture files recorded on an SD card by other products A still picture file (other than JPEG) that cannot be played back on this unit may be erased. ≥Protected files cannot be deleted. ≥Do not open the card slot cover while deleting. The deletion...
Page 78
![Page 78
78VQT1A24
Editing
You can write the data of the still pictures to be
printed and the number of prints (DPOF data)
onto the SD card.
¬
Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the MENU button, then
select [PLAY SETUP]
#
[DPOF SET] # [SET] and press
the cursor button.
2Select the file to be set and then
press the center of the cursor
button.
The number of prints set to be in DPOF is
displayed.
3Move the cursor button up or
down to select the...](http://img.usermanuals.tech/thumb/58/64341/w300_hdc-sd1_mul_om_d-77.png "Page 78
78VQT1A24
Editing
You can write the data of the still pictures to be
printed and the number of prints (DPOF data)
onto the SD card.
¬
Rotate the mode dial to select
and then select the (still picture
playback) tab.
1Press the MENU button, then
select [PLAY SETUP]
#
[DPOF SET] # [SET] and press
the cursor button.
2Select the file to be set and then
press the center of the cursor
button.
The number of prints set to be in DPOF is
displayed.
3Move the cursor button up or
down to select the...")
78VQT1A24 Editing You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Rotate the mode dial to select and then select the (still picture playback) tab. 1Press the MENU button, then select [PLAY SETUP] # [DPOF SET] # [SET] and press the cursor button. 2Select the file to be set and then press the center of the cursor button. The number of prints set to be in DPOF is displayed. 3Move the cursor button up or down to select the...
Page 79
![Page 79
79VQT1A24
Card management
Card management
Formatting
Please be aware that if an SD card is
formatted, then all the data recorded on the
card will be erased. Store important data on a
computer etc.
¬
Rotate the mode dial to select or
.
1Press the MENU button, then
select [SETUP]
#
[FORMAT CARD] # [YES] and
press the cursor button.
2When the confirmation message
appears, select [YES], then press
the cursor button.
≥When formatting is complete, press the
MENU button to exit the message screen....](http://img.usermanuals.tech/thumb/58/64341/w300_hdc-sd1_mul_om_d-78.png "Page 79
79VQT1A24
Card management
Card management
Formatting
Please be aware that if an SD card is
formatted, then all the data recorded on the
card will be erased. Store important data on a
computer etc.
¬
Rotate the mode dial to select or
.
1Press the MENU button, then
select [SETUP]
#
[FORMAT CARD] # [YES] and
press the cursor button.
2When the confirmation message
appears, select [YES], then press
the cursor button.
≥When formatting is complete, press the
MENU button to exit the message screen....")
79VQT1A24 Card management Card management Formatting Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a computer etc. ¬ Rotate the mode dial to select or . 1Press the MENU button, then select [SETUP] # [FORMAT CARD] # [YES] and press the cursor button. 2When the confirmation message appears, select [YES], then press the cursor button. ≥When formatting is complete, press the MENU button to exit the message screen....
Page 80
80VQT1A24 With other products With other products With a TV The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Connect this unit to a TV with one of the following terminals. When connecting to a HDMI terminal, a connection cable (optional) is necessary. ¬ Difference in picture quality depending on the terminal used for connection AHigh quality BStandard quality CHDMI terminal DComponent terminal EVideo terminal ≥Do not use any other AV cables except the...