Panasonic Hdc Sd1 Operating Instructions
Have a look at the manual Panasonic Hdc Sd1 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
71VQT1A24 Playback Recorded scenes are grouped by date on this unit. Scenes recorded on the same day can be played back in succession. 1Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [BY DATE] and press the cursor button. 2Select the date for playback, then press the cursor button. The scenes recorded on the same day are displayed as thumbnails. 3Select the scene to be played back. To return to playing back all the scenes Press the MENU button, then select [PLAY SETUP] # [PLAY MODE] # [VIEW ALL] and press the cursor button. ≥When [PLAY MODE] is set to [VIEW ALL], all recorded motion pictures will be played back in succession. ([ ] is displayed.) ≥Playing back all the scenes returns if the power is turned off or the mode dial is operated. ≥Even if scenes are recorded on the same day, they are grouped separately in the following cases. – When the number of scenes exceeds 99 – When the card is repairedPlayback of the first scene starts after playback of the last scene finishes. Press the MENU button, then select [PLAY SETUP] # [REPEAT PLAY] # [ON] and press the cursor button. The [ ] indication appears on the thumbnail and full screen views. ≥The following scenes can be played back repeatedly. – When [PLAY MODE] is set to [VIEW ALL]: All the scenes on the SD card – When [PLAY MODE] is set to [BY DATE]: All the scenes on the selected date To cancel the repeat playback function Press the MENU button, then select [PLAY SETUP] # [REPEAT PLAY] # [OFF] and press the cursor button. Playing back motion pictures by dateRepeat playback VQT1A24_ENG_PP.book 71 ページ 2007年1月21日 日曜日 午後1時17分
72VQT1A24 Playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. Press the MENU button, then select [PLAY SETUP] # [RESUME PLAY] # [ON] and press the cursor button. If playback of a motion picture is stopped, [ ] appears on the thumbnail view of the stopped scene. To cancel the resume playback function Press the MENU button, then select [PLAY SETUP] # [RESUME PLAY] # [OFF] and press the cursor button. ≥The memorized resume position is cleared if you turn off the power or operate the mode dial. (The [RESUME PLAY] setting is kept.) Still picture (JPEG) playback Play back the still pictures recorded on the card. 1Rotate the mode dial to select . The lens cover closes. 2Press the cursor button up and then right to select the (still picture playback) tab. AStill picture playback tab The still pictures recorded on the SD card are displayed as thumbnails (reduced-size images). 3Select the file to be played back. BPrevious page CNext page DFile number display EFolder/file name The selected file will be encircled by a yellow frame. Resuming the previous playback A BC D E VQT1A24_ENG_PP.book 72 ページ 2007年1月21日 日曜日 午後1時17分
73VQT1A24 Playback ≥If 9 or more files have been recorded, the next (or previous) page can be displayed by moving the cursor button left and right or moving the cursor button down, selecting / by moving the cursor button left and right and then pressing the center of the cursor button. ≥The file number display switches to the page number when the still picture playback tab or / is selected. 4Press the cursor button. The selected file is played back on the full screen. ≥The operation icon is automatically displayed on the screen. 5Move the cursor button to operate. 1/;: Slide show (playback of the still pictures on the SD card in numerical order) start/pause. E: Plays back the previous picture. D: Plays back the next picture. ∫: Stops the playback and shows the thumbnails. ªAbout still picture compatibility ≥This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). ≥The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back.) ≥If a non-standard file is played back, the folder/ file name may not be displayed. ≥This unit may degrade or not play back data recorded or created on other products and other products may degrade or not play back data recorded on this unit. ≥While this unit accesses the SD card (the access lamp is lit), do not remove the SD card. ≥Do not operate the mode dial during the slide show. ≥It takes time to display the file depending on the number of pixels of the file. ≥Files which cannot be displayed as thumbnails (the thumbnails are displayed as ) cannot be played back. ≥If you attempt to play back a file which is a different format or a damaged file, an error message appears and the screen shows the thumbnails. ≥The date/time displayed may be different from the recording date/time and it may take time to display the thumbnail display when playing back still pictures not recorded on this unit. ≥The power will not turn off even if the LCD monitor is closed. VQT1A24_ENG_PP.book 73 ページ 2007年1月21日 日曜日 午後1時17分
74VQT1A24 Editing Editing Editing scenes The deleted scenes cannot be restored. ¬ Rotate the mode dial to select and then select the (motion picture playback) tab. 1Press the button during playback. 2When the confirmation message appears, select [YES], then press the cursor button. ¬Rotate the mode dial to select and then select the (motion picture playback) tab. 1Press the button while the thumbnail view screen is displayed. 2Move the cursor button up or down to select [ALL SCENES] or [SELECT] and press the cursor button. ≥When [ALL SCENES] is selected, the following scenes except the protected scenes will be deleted. Proceed to step 5. – When [PLAY MODE] is set to [VIEW ALL]: All the scenes on the SD card – When [PLAY MODE] is set to [BY DATE]: All the scenes selected by date 3(Only when [SELECT] is selected in step 2) Select the scene to be deleted, then press the cursor button. The selected scene is encircled by a red frame. ≥When the cursor button is pressed again, the selected scene will be canceled. ≥Up to 50 scenes can be set in succession. Deleting scenes This is for deleting scenes recorded on SD cards. Deleting scenes one at a time Deleting multiple scenes from the thumbnail display VQT1A24_ENG_PP.book 74 ページ 2007年1月21日 日曜日 午後1時17分
75VQT1A24 Editing 4(Only when [SELECT] is selected in step 2) Press the button. 5When the confirmation message appears, select [YES], then press the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other scenes Repeat steps 3-5. To complete editing Press the MENU button. ≥Scenes which cannot be played back (the thumbnails are displayed as ) cannot be deleted. ≥Protected scenes cannot be deleted. ≥Do not open the card slot cover while deleting. The deletion will stop. ≥In case of [ALL SCENES], the deletion may take time if there are many scenes on the SD card. ≥Do not turn off this unit while deleting. ≥When you delete scenes, use a battery with sufficient battery power or use the AC adaptor. ≥If you delete scenes recorded on other products with this unit, all the data related to the scenes may be deleted.Scenes can be protected so that they are not deleted by mistake. (Even if you protect some scenes on an SD card, formatting the SD card will delete them.) ¬ Rotate the mode dial to select and then select the (motion picture playback) tab. 1Press the MENU button, then select [PLAY SETUP] # [SCENE PROTECT] # [YES] and press the cursor button. 2Select the scene to be protected and then press the center of the cursor button. The [ ] indication appears and the scene is protected. ≥Press the cursor button again to cancel the setting. ≥2 or more scenes can be set in succession. To complete the settings Press the MENU button. Protecting scenes This is for preventing scenes from being deleted by mistake. VQT1A24_ENG_PP.book 75 ページ 2007年1月21日 日曜日 午後1時17分
76VQT1A24 Editing Editing still pictures The deleted files cannot be restored. ¬ Rotate the mode dial to select and then select the (still picture playback) tab. 1Press the button during playback. 2When the confirmation message appears, select [YES], then press the cursor button. ¬Rotate the mode dial to select and then select the (still picture playback) tab. 1Press the button while the thumbnail view screen is displayed. 2Move the cursor button up or down to select [ALL SCENES] or [SELECT] and press the cursor button. ≥When [ALL SCENES] is selected, all files on the SD card except the protected files will be erased. Proceed to step 5. 3(Only when [SELECT] is selected in step 2) Select the file to be deleted, then press the cursor button. The selected file is encircled by a red frame. ≥When the cursor button is pressed again, the selected file will be canceled. ≥Up to 50 files can be set in succession. 4(Only when [SELECT] is selected in step 2) Press the button. Deleting still pictures This is for deleting still picture files recorded on SD cards. Deleting files one at a time Deleting multiple files from the thumbnail display VQT1A24_ENG_PP.book 76 ページ 2007年1月21日 日曜日 午後1時17分
77VQT1A24 Editing 5When the confirmation message appears, select [YES], then press the cursor button. (Only when [SELECT] is selected in step 2) To continue deleting other files Repeat steps 3-5. To complete editing Press the MENU button. ªDeleting still picture files recorded on an SD card by other products A still picture file (other than JPEG) that cannot be played back on this unit may be erased. ≥Protected files cannot be deleted. ≥Do not open the card slot cover while deleting. The deletion will stop. ≥In case of [ALL SCENES], the deletion may take time if there are many files on the SD card. ≥Do not turn off this unit while deleting. ≥When you delete files, use a battery with sufficient battery power or use the AC adaptor. ≥If files conforming to DCF standard are deleted, all the data related to the files will be deleted.Files recorded on an SD card can be protected so that they are not deleted by mistake. (Even if you protect some files on an SD card, formatting the SD card will delete them.) ¬ Rotate the mode dial to select and then select the (still picture playback) tab. 1Press the MENU button, then select [PLAY SETUP] # [SCENE PROTECT] # [YES] and press the cursor button. 2Select the file to be protected and then press the center of the cursor button. The [ ] indication appears and the file is protected. ≥Press the cursor button again to cancel the setting. ≥You can also select multiple files in succession. To complete the settings Press the MENU button. Protecting still pictures This is for preventing still picture files from being deleted by mistake. VQT1A24_ENG_PP.book 77 ページ 2007年1月21日 日曜日 午後1時17分
78VQT1A24 Editing You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Rotate the mode dial to select and then select the (still picture playback) tab. 1Press the MENU button, then select [PLAY SETUP] # [DPOF SET] # [SET] and press the cursor button. 2Select the file to be set and then press the center of the cursor button. The number of prints set to be in DPOF is displayed. 3Move the cursor button up or down to select the number of prints, then press the cursor button. ≥You can select from 0 to 999. (The selected number of pictures can be printed with the printer supporting DPOF.) ≥To cancel the setting, set the number of prints to [0]. ≥You can also select multiple files in succession. To complete the settings Press the MENU button. To cancel all DPOF settings Press the MENU button, then select [PLAY SETUP] # [DPOF SET] # [CANCEL ALL] and press the cursor button. ≥When the confirmation message appears, select [YES], then press the cursor button. ªWhat is DPOF? DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF. ≥The DPOF setting can be established for up to 999 prints. ≥DPOF setting made on other devices may not be recognized by this unit. Please perform the DPOF settings on this unit. ≥You cannot add the recording date to pictures to be printed with the DPOF settings. DPOF setting This is for writing the printing data on an SD card. VQT1A24_ENG_PP.book 78 ページ 2007年1月21日 日曜日 午後1時17分
79VQT1A24 Card management Card management Formatting Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a computer etc. ¬ Rotate the mode dial to select or . 1Press the MENU button, then select [SETUP] # [FORMAT CARD] # [YES] and press the cursor button. 2When the confirmation message appears, select [YES], then press the cursor button. ≥When formatting is complete, press the MENU button to exit the message screen. ≥Use this unit to format SD cards. If an SD card is formatted on other products (such as a computer), the time spent for recording may become longer and you may not be able to use the SD card. ≥Depending on the type of SD card being used, it may take time to format. ≥During formatting, do not turn this unit off. ≥When you format the SD card, use a battery with sufficient battery power or the AC adaptor. ≥Do not remove the SD card while formatting. Formatting an SD card This is for initializing cards. VQT1A24_ENG_PP.book 79 ページ 2007年1月21日 日曜日 午後1時17分
80VQT1A24 With other products With other products With a TV The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Connect this unit to a TV with one of the following terminals. When connecting to a HDMI terminal, a connection cable (optional) is necessary. ¬ Difference in picture quality depending on the terminal used for connection AHigh quality BStandard quality CHDMI terminal DComponent terminal EVideo terminal ≥Do not use any other AV cables except the supplied one. ≥Do not use any other component cables except the supplied one.≥Use the AC adaptor to free you from worrying about the battery running down. ªTo display the on-screen information on the TV The information displayed on the screen (operation icon and time code etc.) can be displayed on the TV. Press the EXT DISPLAY button on the remote control. ≥Press the button again to erase the information. ≥The screen on this unit will not change. ªTo watch images with a 16:9 aspect ratio on a regular TV (4:3) When playing back motion pictures or still pictures recorded on this unit with a 16:9 aspect ratio on a TV with a 4:3 aspect ratio, the images on the screen may be squeezed horizontally. In this case, change the menu setting to play back the pictures in the original aspect ratio. (Depending on the TV setting, the pictures may not be displayed correctly. For more information, please read the operating instructions of your TV.) Press the MENU button, then select [SETUP] # [TV ASPECT] # [4:3] and press the cursor button. Example of images with a 16:9 aspect ratio on a regular TV (4:3) Playback on TV TV/Devices you useReference items TV with a HDMI terminal1Connecting with a HDMI cable (optional) (l81) TV with a HDMI terminal and AV amplifier with a HDMI terminal2Listening in 5.1 channel sound (l83) TV with a component terminal3Connecting with the component cable (supplied) and the AV cable (supplied) (l84) Other TVs4Connecting with the AV cable (supplied) (l86) A CDEB [TV ASPECT] setting [16:9][4:3] ZOOM START/ STOP PHOTO SHOT EXT DISPLAY DATE/ TIME VOL VQT1A24_ENG_PP.book 80 ページ 2007年1月21日 日曜日 午後1時17分