Panasonic Hdc Dx1 Operating Instructions

							111LSQT1093
Others
ªRecording indications
Motion picture recording
Still picture recording
Indications
Remaining battery power
90minRemaining time for battery 
power
R30minRemaining time for motion 
pictures recording
0h00m00sElapsed recording time
DEC 15 2007
3:30PMDate indication
Time indication
¥/; (Red)Recording/writing to a disc
; (Green)Recording pause
Auto mode
Manual mode
MFManual focus
10tZoom magnification indication
Backlight compensation
Image stabilizer
Power LCD
1/100Shutter speed
OPEN, F2.0F number
0dBGain value
Soft skin mode
Tele macro
, Fade (White), Fade (Black)
/MagicPix function/
0 Lux MagicPix function
DEC 15 2007 3:30PM
AUTO
MNL
Zoom microphone
Wind noise reduction
Microphone level
Zebra display
, , Motion picture recording mode
5Sports mode
Portrait mode
Low light mode
Spotlight mode
Surf & snow mode
Auto white balance
Indoor mode (recording under 
incandescent lamp)
Outdoor mode
Manual adjustment mode
Disc type
DVD-RAM
DVD-RW
DVD-R
DVD-R DL
(dual layer on single side)
ß/ßA/Flash
ßi/ßjFlash level
Red eye reduction
± (White)
¥ (Green)Focus indication
Ø
10/Ø2Self-Timer recording
 MEGA OIS
Number of recording pixels for 
still pictures
1920k1080
 (White)Card can be recorded to
 (Green)Recognizing the card
 (Red)Recording/accessing the card
/Still picture quality
100Remaining number of still 
pictures
HFHNHE
AWB
MEGA
2.1
LSQT1093ENG.book  111 ページ  ２００７年１月１５日　月曜日　午前９時２３分 
						

							11 2LSQT1093
Others
ªPlayback indications
Motion picture playback
Still picture playback
ªPC connection indications
ªConfirmatory indications
1Playback
;Pause
5/6Cue/Review playback
7/8Last/first scene paused
9/:Skip playback
D/ESlow motion playback
;1/2;Frame-by-frame playback
0h00m00sMotion picture playback time
Play mode
All scenes on the disc
Scenes recorded on the 
selected date
No.10Scene number
Volume adjustment
Repeat playback
Resume playback
100-0001Still picture folder/file number 
display
PictBridgeWhen a printer compatible with 
PictBridge is connected
1DPOF already set
(to more than 1)
Contents that have been 
protected on another device.
øüøüøü
Number of recording pixels for 
still pictures
1920k1080
The picture size is not displayed for still 
pictures recorded with other products that have 
different picture sizes from the sizes shown 
above.
 Accessing the card
(When connected to a computer)
––
(Time 
display)The built-in battery is low. (l46)
°The warning/alarm indication 
appears when LCD monitor is 
rotated towards the lens side. 
Return the direction of the LCD 
monitor to normal position and 
check the warning/alarm 
indication.
No disc is inserted.
Unusable disc
Unusable card2.1
LSQT1093ENG.book  112 ページ  ２００７年１月１５日　月曜日　午前９時２３分 
						

							Others
113LSQT1093
Messages
CANNOT RECORD.Data writing to the disc or SD card has failed.
NO DATA.There are no images recorded on the disc or SD card.
If this message appears although data is recorded on the SD card, 
the condition of the card is probably not stable.
Turn off the power and then turn it on again.
CANNOT BE USED DUE 
TO INCOMPATIBLE DATA.The recording format is different so it cannot be used. Insert a new 
disc.
CANNOT RECORD -
INCOMPATIBLE CONTROL 
DATA.
THIS DISC IS 
INCOMPATIBLE.You inserted an incompatible disc (copy-protected discs, etc.).
PLEASE CHECK THE 
DISC.You inserted a disc that cannot be read on this unit.
THIS IS A NON-
RECORDABLE DISC.The disc cannot be used for recording on this unit. Insert a new disc.
RECOMMENDED TO USE 
PANASONIC DISCYou inserted a disc that does not meet the DVD standard for quality 
and performance so you may not be able to record normally. 
CANNOT RECORD.
(THIS DISC IS FINALIZED)A finalized DVD-RW or DVD-R, DVD-R DL has been inserted.
After finalizing, the discs become play-only and cannot record. If 
you un-finalize a DVD-RW, it can be used for recording. (l87)
CANNOT RECORD. DISC 
IS FULL.The disc is full or the number of scenes has reached the maximum 
limit so no further data can be recorded. Delete unnecessary 
scenes (l80) or insert a new disc.
CANNOT RECORD. THE 
NUMBER OF SCENES HAS 
EXCEEDED THE MAXIMUM 
LIMIT.
CANNOT RECORD - DATE 
CAPACITY IS FULL.The number of scenes grouped together on a date has reached the 
maximum number so recording is not possible. Delete unnecessary 
scenes (l80) or insert a new disc.
NO NEED TO FORMAT 
THIS DISC.DVD-R and DVD-R DL can only be recorded on once so cannot be 
formatted.
THIS DISC IS FINALIZED.A finalized disc has been inserted. DVD-R and DVD-R DL cannot be 
un-finalized. If you un-finalize a DVD-RW, it can be used for 
recording again. (l87)
LSQT1093ENG.book  113 ページ  ２００７年１月１５日　月曜日　午前９時２３分 
						

							Others
11 4LSQT1093
CANNOT FINALIZE.The disc cannot be finalized (un-finalized) on this unit. (The disc 
was recorded on another device etc.)
Or, you are trying to finalize a disc that has no motion pictures 
recorded on it.
CANNOT UN-FINALIZE 
THIS DISC.
CANNOT READ DISC. 
PLEASE CHECK 
CONDITION OF DISC.There are scratches or dirt on the recording/playback side of the 
disc. If there is dirt on the disc, use the supplied cleaning cloth to 
wipe it. (l30) If the disc is scratched, insert a new one.
CHECK CARD.This card is not compatible or it cannot be recognized by the unit.
CARD LOCKED.The write protection switch on the SD card is set to LOCK. (l29)
CARD FULL.The SD card is full so no further data can be recorded. Delete 
unnecessary files (l82) or insert a new SD card.
TOP MENU COULD NOT 
BE CREATED.Creating a top menu has failed.
There may be scratches or dirt on the recording/playback side of the 
disc. If there is dirt on the disc, use the supplied cleaning cloth to 
wipe it. (l30)
CANNOT PROTECT.Scenes on the DVD-RAM for which top menus have been created 
cannot be protected.
CANNOT OPERATE. 
TEMPERATURE IS HIGH.The temperature of the unit is high so it cannot be operated. Turn off 
the power, wait until the unit cools and then turn on the power again.
CANNOT OPERATE. 
TEMPERATURE IS HIGH. 
PLEASE TURN OFF AND 
WAIT A WHILE.
THIS BATTERY CANNOT 
BE USED.Use a battery that is compatible with this unit. (l32)
If using a Panasonic battery compatible with this unit (l32), eject 
the battery and then insert it again. If the message appears even 
after repeating this several times, this unit needs repair. Detach the 
power and consult the dealer who you purchased this unit from. Do 
not attempt to repair it by yourself.
AGS MODE ON-REC 
PAUSEDThe AGS function is activated. (l49)
PUSH THE RESET 
SWITCH.An irregularity in the unit has been detected. Press the RESET 
button to restart the unit. (l122)
There may be scratches or dirt on the recording/playback side of the 
disc. If there is dirt on the disc, use the supplied cleaning cloth to 
wipe it. (l30) If the disc is scratched, insert a new one.
CHECK THE DISC AFTER 
PUSHING THE RESET 
SWITCH TO REPAIR THE 
DATA.
CANNOT SET.The [GUIDE LINES], [ZEBRA], [MF ASSIST] and [MIC LEVEL] 
menu settings cannot be set when the color bar is set.
CHANGE MODE TO USE 
USB.The USB cable is connected in recording mode.
DISCONNECT USB 
CABLE.The unit cannot correctly establish the connection to the computer 
or printer. Disconnect and then reconnect the USB cable.
LSQT1093ENG.book  114 ページ  ２００７年１月１５日　月曜日　午前９時２３分 
						

							Others
115LSQT1093
It is possible that the system cannot complete writing of a file normally when, for example, power is 
turned off for some reason during recording or editing.
If faulty management information is found when a disc is accessed, the following message may appear. 
(Repairing may take time depending on the error.)
When connecting to AC adaptor or the remaining capacity of the battery is enough:
[FINISHED]
When the remaining capacity of the battery is low:
[PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.]
When connecting to AC adaptor or the remaining capacity of the battery is enough:
[THUMBNAIL DATA HAS BEEN REPAIRED SUCCESSFULLY.]
When the remaining capacity of the battery is low:
[PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.]
≥Use a sufficiently charged battery or the AC adaptor.
≥Depending on the condition of the data, it may not be possible to completely repair the data.
≥If the recovery fails, you will no longer be able to playback the data recorded before the power went 
off.
≥When data recorded on another device is recovered, it may not be possible to play back the data on 
this unit or the other device.
≥If the thumbnail information is recovered, displaying the thumbnails may become slower.
About recovery
CONTROL DATA ERROR HAS BEEN 
DETECTED.
THUMBNAIL DATA ERROR IS DETECTED.
LSQT1093ENG.book  115 ページ  ２００７年１月１５日　月曜日　午前９時２３分 
						

							Others
11 6LSQT1093
Functions that cannot be used simultaneously
Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. 
The table below shows examples of functions restricted by various conditions.
FunctionsConditions which disable the functions
Backlight compensation≥When the MagicPix function is used
≥When the iris/gain is set
MagicPix (Set and cancel)≥While recording
Soft skin mode (Set and cancel)
Tele macro (Set and cancel)
Help mode
Shutter effect≥While motion pictures recording
Flash≥While motion pictures recording
≥When the MagicPix function is used
Zoom≥When the PHOTO SHOT button is pressed halfway in still 
picture recording
Zoom microphone≥An external microphone is used
Wind noise reduction
Scene mode≥When setting the AUTO/MANUAL/FOCUS switch to 
AUTO
≥When the MagicPix function is used
MF assist function≥When digital zoom (12k or higher) is used
Change of white balance≥When digital zoom (12k or higher) is used
≥When the MagicPix function is used
Adjusting the shutter speed, iris/
gain≥When the MagicPix function is used
≥When the scene mode is used
LSQT1093ENG.book  116 ページ  ２００７年１月１５日　月曜日　午前９時２３分 
						

							Others
117LSQT1093
Frequently asked questions
What kind of discs can be used?
DVD-RAM, DVD-RW, DVD-R and DVD-R DL can be used if they are 8 cm (3q) bare 
discs. (l26)
Can discs with a cartridge be used?
They can be used if the cartridge is removed.
Can double sided discs be used?
They can be used. 
However you cannot record or play continuously from one side of the disc to the other. 
You will need to eject the disc and turn it over.
Can I record continuously from one side of the disc to the other on a double sided disc?
You cannot record continuously from one side of the disc to the other. The recording time 
indicated on the disc package is the total time for both sides. You will need to eject the 
disc and turn it over to record on both sides.
Can DVD-R or DVD-R DL be recorded to once only?
Recording can be started and stopped until the disc is full.
However the data recorded on the DVD-R or DVD-R DL cannot be erased.
Is playback possible on a DVD player?
To playback a disc recorded on this unit, you will need a playback device that supports 
the AVCHD.
Also if a DVD-RW, DVD-R or DVD-R DL recorded on this unit is inserted in another 
device without it being finalized, it may no longer be possible to use the disc. Always 
finalize the disc on this unit before inserting it in another device.
Can commercially available computer software be used?
For information about software from other companies, contact the makers of the 
software.
LSQT1093ENG.book  117 ページ  ２００７年１月１５日　月曜日　午前９時２３分 
						

							Others
11 8LSQT1093
Troubleshooting
ªUnit operations
ProblemCheck points
This unit cannot be 
turned on.≥Is the battery fully charged?
#Charge the battery using the AC adaptor. (l31)
≥The battery protection circuit may have operated. Attach the battery 
to the AC adaptor for 5 to 10 seconds. If the unit still cannot be 
used, the battery is faulty.
≥Is the LCD monitor opened or the viewfinder extended?
This unit is turned off 
automatically.≥If you do not use the unit for approximately 5 minutes, the power is 
automatically turned off to conserve the battery charge. To resume 
recording, turn the power back on. The power will not turn off 
automatically when the power save function is set to [OFF]. (l110)
≥Are you connecting to a TV compatible with EZ Sync with a HDMI 
cable?
#If you connect to a TV compatible with EZ Sync with a HDMI 
cable and turn off the power on the TV with the remote control for 
the TV, the power on this unit also turns off. If you are not using 
EZ Sync, set [EZ Sync] to [OFF]. (l96)
This unit does not stay 
on long enough.≥Is the battery low?
#If the remaining battery power indication is flashing or the 
message “LOW BATTERY.” is displayed, the battery has run 
down. Charge the battery. (l31)
A clicking sound is heard 
when the unit is shaken 
about.≥This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit’s power is turned 
on.
Battery runs down 
quickly.≥Is the battery fully charged?
#Charge it with the AC adaptor. (l31)
≥Are you using the battery in an extremely cold place?
#The battery is affected by ambient temperature. In cold places, 
the operating time of the battery becomes shorter.
≥Has the battery worn out?
#The battery has a limited life. If the operating time is still too short 
even after the battery is fully charged, the battery has worn out 
and can no longer be used. 
The minute display of the 
remaining battery power 
indication is not 
displayed correctly.≥The remaining battery capacity indication is an approximation. If you 
think the remaining battery capacity indication is not displayed 
correctly, fully charge the battery, discharge it and then charge it 
again. (Even if this operation is performed, it may not be possible to 
display the remaining battery capacity correctly if the battery was 
used for a long period of time where the temperature was low or 
high or if the battery was repeatedly charged.)
LSQT1093ENG.book  118 ページ  ２００７年１月１５日　月曜日　午前９時２３分 
						

							Others
119LSQT1093
ProblemCheck points
This unit cannot be 
operated though it is 
turned on.
This unit does not 
operate normally.≥The unit cannot be operated unless you open the LCD monitor or 
extend the viewfinder.
≥Press the RESET button. (l122) If normal conditions are not 
restored yet, remove the battery or AC adaptor, wait about 1 minute 
and then reconnect the battery or AC adaptor. Then about 1 minute 
later, turn on the power again. (Conducting the above operation 
when the access lamp is on may destroy the data on the disc or SD 
card.)
The remote control does 
not function.≥Has the button-type battery of the remote control run out? 
#Replace it with a new button-type battery. (l24) 
The DISC EJECT lever 
does not work.≥The disc cover will not open unless the unit is powered.
#Connect a charged battery or AC adaptor.
≥The DISC EJECT lever does not work when the unit is connected to 
the computer.
#Disconnect the USB cable.
The screen has changed 
suddenly.≥Has the demonstration started?
#If you set [DEMO MODE] to [ON] without inserting a disc or an 
SD card in recording mode, the unit is automatically set to the 
demonstration mode for introducing its functions. Normally this 
should be set to [OFF]. Press the MENU button, then select 
[SETUP] # [DEMO MODE] # [OFF] and press the cursor 
button.
A function indication 
such as the remaining 
time indication or the 
elapsed time indication is 
not shown.≥If you set [SETUP] > [DISPLAY] > [OFF], indications other than 
warnings and date indications disappear.
The disc cannot be read.≥Are there fingerprints or dirt on the surface of the disc?
#If there are fingerprints or dirt on the disc, wipe them off. (l30)
Recording does not start 
although power is 
supplied to this unit and 
the disc or SD card is 
correctly inserted.≥Has the DVD-RW, DVD-R or DVD-R DL been finalized?
#After finalizing, the discs become play-only and cannot record. If 
you un-finalize a DVD-RW, it can be used for recording. (l87)
≥Has the SD card’s write protect switch been set to LOCK?
#No recording is possible while the write protect switch is set to 
LOCK. (l29)
≥Is the memory of the disc or SD card full?
#If the disc or SD card has no more available memory, free up 
some memory by deleting unnecessary scenes (l80, 82) or 
use a new disc or SD card.
≥Is the unit set to the recording mode?
#No recording is possible unless the mode dial is at  .
≥Is the disc cover open?
#If the cover is open, this unit may not operate normally. Close the 
disc cover.
LSQT1093ENG.book  119 ページ  ２００７年１月１５日　月曜日　午前９時２３分 
						

							Others
120LSQT1093
ProblemCheck points
Recording starts but 
stops immediately.
The playback picture 
breaks up for a moment.≥Is the disc scratched or dirty?
#Wipe off the dirt on the disc. (l30) If the disc is scratched, insert 
a new one.
≥The unit is hot. Follow the messages on the display. To use the unit 
again, turn the unit off and leave it for a while.
The unit arbitrarily stops 
recording.≥Is the AGS function activated? 
#Record in the normal horizontal position or set [AGS] to [OFF]. 
(l49) 
Auto focus function does 
not work.≥Is manual focus mode selected?
#Set the AUTO/MANUAL/FOCUS switch to AUTO.
≥Are you trying to record a scene which is hard to bring into focus in 
auto focus mode?
#There are some recording subjects and surroundings for which 
the auto focus does not operate correctly. (l128) If so, use the 
manual focus mode to adjust the focus. (l70)
Recorded still pictures 
are not clear.≥Are you trying to record small or finely detailed objects with 
[PICT. QUALITY] set at [ ]?
#If you try to record small or finely detailed objects with 
[PICT. QUALITY] set at [ ], the images may break up into a 
mosaic-like pattern. Record with [PICT. QUALITY] set at [ ] 
instead. (l56)
Sound is not played back 
from the built-in speaker 
of this unit.≥Is the volume too low?
#During playback, move the volume lever to display the volume 
indication and adjust it. (l76)
Sound is played back 
from one side of 
speakers when motion 
pictures recorded on this 
unit are played back on 
another device.≥The internal microphones of this unit record sound with Dolby Digital 
5.1 Creator. When the sound is played back on another device, if 
stereo 2 channel speakers on TV are used, the sound may be 
played back from one side of the speakers.
When the TV has surround sound effect function, we recommend 
using it.
Refer to the operating instructions of the TV for how to operate the 
surround sound effect.
Although this unit is 
correctly connected to a 
TV, images cannot be 
seen.
The images are squeezed 
horizontally.≥Does the input switch on the TV match the connected terminal?
#Please read the operating instructions of your TV and select the 
channel that matches the input used for the connection. 
≥Is the [TV ASPECT] setting correct? 
#Change the setting to match the aspect ratio of the TV.
Press the MENU button, then select [SETUP] # [TV ASPECT] 
# [16:9] or [4:3] and press the cursor button.
≥Are the HDMI and component cables connected to the unit while in 
recording or PC connection mode?
#If both HDMI and component cables are to be connected, set the 
unit to playback mode.
LSQT1093ENG.book  120 ページ  ２００７年１月１５日　月曜日　午前９時２３分