Home
>
Panasonic
>
Projection Television
>
Panasonic Hd Projection Television Pt 47xd64 Operating Instructions
Panasonic Hd Projection Television Pt 47xd64 Operating Instructions
Here you can view all the pages of manual Panasonic Hd Projection Television Pt 47xd64 Operating Instructions. The Panasonic manuals for Projection Television are available online for free. You can easily download all the documents as PDF.
Page 11
OPTIONAL EQUIPMENT CONNECTIONS 9 z ENGLISH HDMI (High Definition Multimedia Interface) input connection About HDMI HDMI is the first all digital consumer electronics A/V interface that supports several uncompressed standard, enhanced and high definition video format as well as existing multi-channel audio format. One jack supports both video and audio information. The HDMI/HDCP 1 input can be connected to an EIA/CEA 861 2compliant consumer electronic device, such as a set top box or DVD player equipped...
Page 12
10 z OPTIONAL EQUIPMENT CONNECTIONS ENGLISH Digital Audio Out Connection Use the diagram below to connect the Digital Audio Output of your HDTV Projection Television to a Dolby Digital decoder. Digital Audio Out Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides five discrete full-bandwidth channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency Effect) subwoofer channel. For a full Home Theater sound...
Page 13
PIP AND SPLIT OPERATION 11 z ENGLISH PIP and SPLIT Operation PIP Operation This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the same time with or without an external video source such as a VCR, cable box, etc. Note:Only the Analog programming from Antenna (A) and video inputs signal can be viewed in the PIP/SPLIT frame. Procedure • Connect incoming cable to ANT (A) input on back of TV. • Press to display PIP frame. • Select...
Page 14
12 z PIP AND SPLIT OPERATION ENGLISH Move Button (PIP only) This feature is used to move PIP frame to one of four corners. Procedure • Press to display PIP frame. • Press to position PIP frame to desired corner. • Press to cancel PIP frame. PIP MIN and PIP MAX Buttons While PIP frame is displayed, press PIP MIN or PIP MAX button to vary the size of PIP frame. Procedure • Press to display PIP frame. • Press or to size PIP frame. • Press to cancel PIP frame. Freeze Button (PIP and Split)...
Page 15
SPECIAL FEATURES OF THE HIGH DEFINITION PROJECTION TELEVISION 13 z ENGLISH Special Features of the High Definition Projection Television Channel and Program Tuning Channel and Program tuning in digital television is different from current conventional television. In DTV, multiple programs can exist within a single 6MHZ channel. These channels behave as sub-channels within a single channel. When tuning to a digital channel, the HDTV Projection Television will also tune to a program. The HDTV Projection...
Page 16
14 z SPECIAL REMOTE BUTTONS ENGLISH Special Remote Buttons ASPECT Button The ASPECT button on the remote control lets you choose one of four display modes, depending on the formats of the received signal and your preferences. BBE Button Press this button to turn BBE VIVA 3D sound feature (available on PT-53TWD64) or BBE sound feature (available on PT-47XD64 and PT-53XD64) On or Off. SAP Button Press this button to select the next audio track (if available) when receiving a digital channel. In analog...
Page 17
REMOTE CONTROL OPERATION 15 z ENGLISH Remote Control Operation 10 1 2 4 3 5 7 6 8 9 11 12 13 14 15 16 18 17 19 20 21 22 23 24 25 26 27 28 30 29 31 32 EUR7627Z10 BUTTON NUMBERDESCRIPTION Press to choose menu and sub-menu entry. Press to display Main Menu or return one step backward in menus. Press numeric keypad to select any channel or press to enter alphanumeric input in menus. Press to switch to previously viewed channel or input mode. PIP MIN - While remote is in TV mode, press to...
Page 18
16 z REMOTE CONTROL OPERATION ENGLISH Programming The Remote Control The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, DBS, RCVR or AUX. Follow the procedures for programming your Remote Control with or without a code for the component. Note:Determine the manufacturer of the component and look in the table for the code (found on pages 17~18). Procedure 1. Confirm that the external component is plugged and...
Page 19
REMOTE CONTROL OPERATION 17 z ENGLISH Codes For VCR BrandCode Admiral335 Aiwa332 Akai314, 315, 316, 329 Audio Dynamic311, 339 Bell & Howell305, 313 Broksonic320, 326 Canon323, 325 CCE343 Citizen306 Craig305, 306, 329 Curtis Mathes324, 345 Daewoo 301, 324, 343 DBX310, 311, 339 Dimensia345 Emerson303, 319, 320, 325, 326, 343 Fisher305, 307, 308, 309, 313 Funai320, 326, 334 GE324, 333, 345 Goldstar306 Gradiente334 Hitachi300, 323, 345 Instant Replay323, 324 Jensen339 JVC310, 311, 334, 339...
Page 20
18 z REMOTE CONTROL OPERATION ENGLISH Component Codes (Cont.) Codes For CD Players BrandCode Admiral226 Aiwa233, 235 Carver229 Denon242 Emerson239 Fisher205 Harman/Kardon219, 220, 221, 223 Hitachi207 Jensen234 JVC240, 241, 245 Kardon223 Kenwood200, 201, 211, 245 LXI/Sears236 Magnavox229, 232 Marantz229 McIntosh221 Nakamichi210 Onkyo214, 215 Optimus208, 218, 220, 222 Panasonic224, 225, 227 Philips229, 230 Pioneer208 Quasar224, 225, 227 RCA231, 237, 238, 247 Sansui210, 246 Sanyo205 Scott210, 246...