Panasonic Hd Projection Television Pt 47wxd64 Operating Instructions

OPTIONAL EQUIPMENT CONNECTIONS
9 z
ENGLISH
HDMI (High Definition Multimedia Interface)
input connection
About HDMI
HDMI is the first all digital consumer electronics A/V
interface that supports several uncompressed standard,
enhanced and high definition video format as well as
existing multi-channel audio format. One jack supports both
video and audio information. The HDMI/HDCP
1 input can
be connected to an EIA/CEA 861
2compliant consumer
electronic device, such as a set top box or DVD player
equipped...

10 z
OPTIONAL EQUIPMENT CONNECTIONS
ENGLISH
Digital Audio Out Connection
Use the diagram below to connect the Digital Audio Output of your
HDTV Projection Television to a Dolby Digital decoder.
Digital Audio Out
Dolby Digital 5.1 channel surround sound delivers digital-quality
sound. Dolby Digital provides five discrete full-bandwidth
channels for front left, front right, center, surround left and
surround right, plus a LFE (Low Frequency Effect) subwoofer
channel. For a full Home Theater sound...

PIP OPERATION
11 z
ENGLISH
PIP Operation
This television includes a two-tuner Picture In Picture (PIP)
feature. This allows you to watch two (2) live broadcasts at
the same time with or without an external video source
such as a VCR, cable box, etc.
Note:Only the Analog programming from Antenna (A) and video
inputs signal can be viewed in the PIP/SPLIT frame.
Procedure
• Connect incoming cable to ANT (A) input on back of TV.
• Press   to display PIP frame.
• Select channels for the PIP frame by pressing...

12 z
PIP OPERATION
ENGLISH
Move Button (PIP only) 
This feature is used to move PIP frame to one of four
corners.
Procedure
• Press   to display PIP frame.
• Press   to position PIP frame to desired corner.
• Press   to cancel PIP frame. 
PIP MIN and PIP MAX Buttons
While PIP frame is displayed, press PIP MIN or PIP MAX
button to vary the size of PIP frame.
Procedure
• Press   to display PIP frame.
• Press   or   to size PIP frame.
• Press   to cancel PIP frame.
Freeze Button (PIP and Split) 
This...

SPECIAL FEATURES OF THE HIGH DEFINITION PROJECTION TELEVISION
13 z
ENGLISH
Special Features of the High Definition Projection Television
Channel and Program Tuning
Channel and Program tuning in digital television is different from
current conventional television. In DTV, multiple programs can
exist within a single 6MHZ channel. These channels behave as
sub-channels within a single channel. When tuning to a digital
channel, the HDTV Projection Television will also tune to a
program. The HDTV Projection...

14 z
SPECIAL REMOTE BUTTONS
ENGLISH
Special Remote Buttons
ASPECT Button 
The ASPECT button on the remote control lets you choose
one of four display modes, depending on the formats of the
received signal and your preferences. BBE Button
Press this button to turn BBE sound feature On or Off.
SAP Button
Press this button to select the next audio track (if available) when
receiving a digital channel. 
In analog mode, press this button to cycle through different audio
modes. For example:
• If receiving...

REMOTE CONTROL OPERATION
15 z
ENGLISH
Remote Control Operation
10
 1
 2
 4
 3
 5
 7
 6
 8
 9
11
12
13
14
15
16
18
17
19
20
21
22
23
24
25
26
27
28
30
29
31
32
 BUTTON
NUMBERDESCRIPTION
Press to turn ON and OFF.
Note:The ON/OFF indicator LED (red) will be lit
when set is on.
Press to select remote operation.
Press to select (Component 1or 2), (HDMI), 
(Video 1, 2, 3 or 4) input mode or TV mode.
Press to access Photo Viewer™.
 Also press while Photo Viewer™ is displayed to 
access Photo Viewer™ set up...

16 z
REMOTE CONTROL OPERATION
ENGLISH
Operating Components with Remote Control
Note:Refer to page 18 for programming Remote Control
procedure.
Operating a VCR
Program the remote control to use with VCR.
Operating a CABLE BOX
Program the remote control to use with Cable Box. Operating a DBS
Program the remote control to use with DBS.
Operating a DVD
Program the remote control to use with DVD
 
TO DO THIS...PRESS
Turn on/off
Select TV Input mode for VCR
Change Channels up/down
RecordREC
PlayPLAY
St o...

REMOTE CONTROL OPERATION
17 z
ENGLISH
Operating a Cassette Deck
To operate a cassette deck, the remote control must be in
AUX mode and be programmed with the appropriate code
for your equipment.
Operating a Receiver
Program the remote to operate audio receiver. Operating a PVR (Personal Video Recorder)
Program the remote control to use with a PVR.    
TO DO THIS...PRESS
Turn on/off
Receiver Volume Up/Down
Deck A/BR-TUNE
RecordREC
PlayPLAY
StopSTOP
Fast ForwardPIP MAX
FF 
Rewind the TapePIP MIN
REW...

18 z
REMOTE CONTROL OPERATION
ENGLISH
Programming The Remote
The Universal Remote Control can be programmed to
operate many manufacturers’ components, using the
component function buttons for VCR, DVD, DBS, RCVR or
AUX. Follow the procedures for programming your Remote
Control with or without a code for the component.
Note:Determine the manufacturer of the component and look
in the table for the code (found on page 19).
Procedure
1. Confirm that the external component is plugged and
operating.
2. Turn...