Panasonic Hd Integrated Camera Aw He100n Operating Instructions

31
White balance adjustment
White balance adjustment
In order for the white to be reproduced accurately, the ratio 
between the three primary colors (RGB) is adjusted. If the 
white balance has shifted out of adjustment, not only will the 
white be reproduced poorly but the color tones of the entire 
screen will also be degraded.
   This adjustment m ust be perf
 ormed when using the 
unit for the first time or when the unit has not been 
used for a prolonged period.
    It m ust be performed when the...

3
5   Press the [ ] or [ ] button to make the 
“White Bal” value blink.
6    Press the [ ] or [ ] button to display 
“AWC A” or “AWC B”.
    No settings can be entered (stored) if “A TW” is 
displayed.
7    Press the [MENU] button for two 
seconds.
  The menu display is exited.
8 Press the [SET] button for two seconds.
    The auto white balance adjustment (AWC) and auto 
black balance adjustment (ABC) are performed, and 
the white balance setting is entered.
     The b
lack balance setting is...

33
 Manual adjustment
The white balance can adjusted manually only while the 
user mode is established.
Use an oscilloscope or waveform monitor for the adjustment 
or perform the adjustment in such a way that the white parts 
of the picture are made completely white.
1   Shoot a white subject so that it fills the 
screen.
2   Set to the user mode, select “AWC A” 
or “AWC B” for the white balance, and 
then follow the steps for automatically 
adjusting the white balance adjustment 
(page 31) .
When...

34
Black balance adjustment
Black balance adjustment
In order for the black to be reproduced accurately, the zero 
levels of the three primary colors (RGB) are adjusted. If the 
black balance has shifted out of adjustment, not only will the 
black be reproduced poorly but the color tones of the entire 
screen will also be degraded. Normally, the black balance 
need not be re-adjusted, but it is necessary in the following 
situations.
   This adjustment m ust be perf
 ormed when using the 
unit for the...

35
Black level (total pedestal) adjustment
 Black level (total pedestal) 
adjustment
The black level can be adjusted when using a multiple 
number of cameras including the unit. Ask your dealer to 
perform this adjustment.
(Use an oscilloscope or waveform monitor for the 
adjustment.)
Adjust the black level in accordance with the units and 
devices used.
When performing the operations using the 
accessory wireless remote control
When the accessory wireless remote control is used, the 
black level can be...

36
When doing the adjustment  using the controller
When the AW-RP655 is connected:
1   Press the [IRIS] button several times to 
turn off its lamp.
  Set the iris to the manual ([MANU]) mode.
2   Turn the [FOCUS / IRIS] dial to stop down 
the lens iris.
3   Press the [R / B GAIN / PED] button a 
number of times so that the “PEDESTAL 
TOTAL” item is displayed on the LCD 
panel.
4   Turn the jog dial (main) and adjust the 
black level to 5 IRE (0.035 V) or 7.5 IRE 
(0.050 V) .
5 If necessary, adjust the...

37
Genlock adjustment
Genlock adjustment
The genlock adjustment is performed to achieve phase 
alignment by applying external synchronization (genlock) 
when a multiple number of cameras will be used or when 
the unit will be used in combination with other devices.
This unit supports the BBS or VBS signal as the genlock 
signal.
Ask your dealer to perform this adjustment.
(Use a dual-trace oscilloscope for the adjustment.)
 Horizontal phase adjustment
Observe the waveforms of the external sync signal...

38
When doing the adjustment  using the controller
The same operations as those in “When performing the 
operations using the accessory wireless remote control” can 
be performed following the operation procedure for “Basic 
menu oper ations”

 (pages 40 to 4).
When the AW-RP655 is connected:
1  Press the [MENU] button.
2   Turn the jog dial (main) to display “G / L 
SETTING” on the LCD panel.
3   Press the [OK] button, and display 
“H PHASE”.
4   Turn the jog dial (R) and adjust it to bring 
the...

39
3   Press the [ ] or [ ] button to make “G / L, 
Setup Set” blink.
4  Press the [ ] or [ ] button.
  The “G/L, Setup Set” sub-menu is displayed.
 G/L, Setup Set 
 H Phase                   +1 SC Coarse             180deg SC Fine                   ±0 Setup Level               On
Return
5   Press the [ ] or [ ] button to make the 
“SC Coarse” or “SC Fine” value blink.
    Use the “SC Coarse” item to perform coarse 
adjustments, and the “SC Fine” item to perform fine 
adjustments.
6   Press the...

40
Basic menu operations
Menus are displayed on the monitor when the unit’s settings are to be selected.
The monitor is connected to the video signal output connector (VIDEO OU\
T connector or HD/SD ANALOG connector).
The basic menu operations involve displaying sub-menus from the main menu items, and selecting settings on the sub-menus. 
Some sub-menus have menu items for performing more detailed settings.
The menu operations are conducted using the accessory wireless remote control.
If a controller is...