Panasonic Hd Integrated Camera Aw He100n Operating Instructions

1
When performing the operations  using the controller
When the AW-RP655 is connected:
1   Press the [1] , [2] , [3] , [4] or [5] button 
of [CONTROL/ PREVIEW MONITOR OUT 
SEL] .
2 Press the [MENU] button.
    The display on the LCD panel of the AW-RP655 
switches to the menu mode.
3 Turn the jog dial (main) .
  Display “CAMERA SETTING” on the LCD panel.
4 Press the [OK] button.
   Display “OPEN CAMERA MENU?  OK Key” on the 
LCD panel.
5  Press the [OK] button again.
  The main menu is displayed on...


Shooting
When performing the operations using the accessory wireless remote control
 Changing the camera’s direction
Moving the camera toward the left or right (panning):
  Press the [] or [] button.
Moving the camera up or down (tilting):
  Press the [] or [] button.
Moving the camera diagonally:
    Press the [ ] or [

] button and [] or [] button at 
the same time.
Returning the camera to the reference position:
  Press the [HOME] b
utton for tw

o seconds.
 Using the zoom...

3
What to do when encountering problems in the basic shooting operations
If the trouble is not resolved by taking the action suggested below, refer to “Troubleshooting” (page 56).
When performing the operations using the accessory wireless remote control
The unit does not move.
    Press the [CAM1], [CAM], [CAM3] or [CAM4] button to 
select the unit which is to be operated.
    If only one unit is being used, it is nor mally selected using 
the [CAM1] b

utton.
    If the unit’s status...

4
More advanced operations
Manual shooting
 Manual adjustment of focus
  Manual adjustment of iris
  Manual adjustment of shutter speed
  Manual adjustment of gain
Preset memories
    Up to 100 settings for the camera direction (panning 
and tilting), zoom, focus and also iris can be registered 
in the preset memories, and called.
    The n umber of settings that can be registered and 
called depends on the type of wireless remote control 
(1  settings) or controller that is used f

or...

5
Manual shooting
Manually adjusting the focus
The lens focus can be adjusted manually.
When performing the operations using the accessory wireless remote control
1   Press the [M / FOCUS] button to switch the 
focus to manual adjustment.
2   Press the [F] or [N] button of [FOCUS] , 
and adjust the focus.
    When the [F] button is pressed, the focus moves further 
away (far); conversely, when the [N] button is pressed, 
it moves nearer (near). 
The speed of focusing and other adjustments can 
be...

6
Manually adjusting the iris
The lens iris can be adjusted manually.
When performing the operations using the accessory wireless remote control
1   Press the [M / IRIS] button to switch the 
iris to manual adjustment.
2   Adjust the iris using the [IRIS+] or [IRIS–] 
button.
    Press the [IRIS+] button to adjust the lens iris in the 
opening direction; conversely, press the [IRIS–] button 
to adjust the lens iris in the closing direction.
3   If necessary, press the [A / IRIS] button 
to return...

7
Manual shooting
 Manually adjusting the shutter 
speed
The shutter speed can be set using two methods. One is 
a method that specifies the time (where a time such as 
1/ 50 sec.

 is designated), and the other is a method that 
specifies the frequency (where synchro scan, 60 Hz, etc. is 
designated).
When shooting a TV screen or PC monitor screen, the 
horizontal noise generated when the screen is shot can 
be minimized by adjusting the frequency to the screen 
frequency using synchro scan....

8
Manual shooting
Manually adjusting the gain
There are two ways to adjust the gain. One way involves 
using the buttons on the wireless remote control or 
controller; the other way involves using the Camera Setting 
menu.
The gain can be adjusted more precisely using the Camera 
Setting menu. For further details, refer to the [Gain] item on 
page 47.
When performing the operations using the accessory wireless remote control
1 Press the [OFF] , [LOW] or [HI] button.
    These buttons enable the...

9
Preset memories
This unit enables up to 100 settings for the camera direction (panning and tilting), zoom, focus and iris to be registered in its 
preset memories, and called.
However, the number of settings that can be registered and called depends on the type \
of wireless remote control or controller 
that is used for operation.   The status as to whether the man ual settings or auto settings are applicab
 le is not registered for the focus and iris. 
The current focus and iris values are...

30
Calling the settings of the preset memories
1 Set to the preset memory mode.
  Press the [TR/PSET] button to turn off its lamp.
2   Press the button among the [1] to [50] 
buttons of [TRACING / PRESET MEMORY] 
in which the desired setting was 
registered.
Erasing preset memory settings
1 Set to the preset memory mode.
  Press the [TR/PSET] button to turn off its lamp.
2 Set the memory recording mode.
  Press the [M.LOCK] button to turn off its lamp.
3 Hold down the [RESET] button.
    The buttons...